|
| 1 | Sofa Single Seater (TP) : M & L for removing old faded Tepastry Cloth from seat and back and back side of Sofa including both side of Hand rest in lower side and S & F new Tepastry Cloth of best quality not less than Rs 275/- per metre all as per specified in drawing of sofa single seater (TP). cloth as per sample approved and all as specified and directed by GE |
| 2 | Sofa set 5 Seater (TP) :M&L removing Old faded Tapestry cloth from cushion of sofa set five seater (two single plus one three seater) and S & F new Tapestry cloth of best quality not less than Rs. 275/- per metre as per approved sample for complete sofa set as per required size/shape complete all as specified and directed By GE |
| 3 | Almirah large/medium steel (FD-1031, 1032, 1033 and 1034) |
| 4 | M & L for removing unsv Leg by Supply and fix new leg of almirah large/medium steel made of 1mm thick M S sheet size all as per drg and duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer.(colour of shade as per directed by Engr-in-charge) |
| 5 | M & L for removing unsv lock by Supply and fix new lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - as per sample approval) |
| 6 | M & L for removing unsv handle by Supply and fix new handle mild steel CP 125mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. |
| 7 | M & L for removing unsv Shelf by Supply and fix new shelf of almirah large/medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 8 | M & L for removing unsv locking device by Supply and fix new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed by Engr-in-Charge. (FD-1032). |
| 9 | All as per Srl. Item No. 3.05 here-in-before but almirah large Steel. |
| 10 | Bed Hard Steel (FD/E6/MAP/08(R) |
| 11 | M & L for removing unserviceable ply by Supply and fix new plywood of size 1980x900x12mm thick BWR grade with steel Nut bolt of Bed Hard Steel as per IS:303 all as directed by Engr-in-Charge.(Make of plywood- (As per particular specification) |
| 12 | M & L for removing unserviceable Head bard by Supply and fix new Head board made out of 19mm thick prelaminated particle board exterior grade with PVC beading all round all as directed by Engr-in-Charge. (Make of As per particular specification) |
| 13 | All as per ser No 4.02 here-in-before but foot board of Bed Hard Steel. |
| 14 | M & L for removing unserviceable Shoe by Supply and fix new Hard rubber shoes for Bed hard Steel size 25x25mm square and best quality all as directed by Engr-in-Charge. |
| 15 | Material and Labour for painting to frame of Bed Hard Steel with synthetic enamel black paint including preparation of surface with rubbing with emery paper to bed hard steel all as specified and directed by Engr-in-Charge. |
| 16 | Chair Computer (TP) |
| 17 | M & L for removing old unsv Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assy as per sample inculding tighting the frame work etc. Model No Trade Pattern |
| 18 | M & L for removing old unsv Poly Urathene Armrest by S & F new arm rest of superior quality as per sample including nut and bolts. Model No Trade Pattern |
| 19 | M & L for removing unsv pedestal assy by S & F new pedestal assy including tighting the frame work. Model No Trade Pattern |
| 20 | M & L for removing unsv castor wheel by S & F new castor wheel of superior quality including tighting the frame work. Model No Trade Pattern |
| 21 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 22 | Chair Writing/Visitor Steel (TP) |
| 23 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 24 | Supply and fixing in replacement of arms of chair Writing/Visitor all as directed by Engr-in-Charge. |
| 25 | M & L for black painting to frame of Chair Writing/Visitorl with synthetic enamel paint of black colour and providing 04 nos rubber shoes to legs all as specified and as directed by Engr-in-Charge. |
| 26 | CHAIR CBA STEEL WITH ARMS FD-75 |
| 27 | (a) M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11\\" x 2\\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\\" x 2\\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge.(b) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (c) S&F Plywood 12mm thick commercial size 18\\" x 17\\" fixed on welded MS Flat (Iron) with the help of suitable Nut & Bolt with washer for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tepestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work .(d) S&F Plywood 12mm thick commercial size 18\\" x 15½\\" fixed on welded MS Flat (Iron) with the help of suitable Nut & Bolt with washer for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tepestry cloth with the help of suitable stappler pin and upholstery work .Note : Tepastry cloth (Not less than 220/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge and after preparation of seat and back same covered with packing plastic material (thin packing Plastic Roll) |
| 28 | Chair Dinning Cushioned (FD/MAP-II/04):-Removing of unserviceable/broken following parts of Chair dining cushion without damaging of other parts of chair, supply and fixing same new parts as shown on drg and specified and directed by Engr-in-Charge. |
| 29 | 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM). |
| 30 | M&L removing Old unserviceable cushion of sofa seat/back and provide new 100mm thick cushion (cool foam) 40 density (Make : as per key specification) covered with new tapestory cloth (not less than Rs 250/- per running mtr) size as per Drg and all as specified and as direcred by the Engineer-in- charge.. |
| 31 | Material and labour for french polishing with best quality french polish on exposed surfaces to Table dinning 4 persons(FD/MAP-II/03) upto good looking after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 32 | All as per Srl. Item No. 10 here-in-before but Bin linen multipurpose (FD/E6/MAP/09). |
| 33 | All as per Srl. Item No. 10 here-in-before but Table dressing ladies (FD-251, FD/MAP-II/07) |
| 34 | All as per Srl. Item No. 10 here-in-before but Teapoy (FD-232 & 278) |
| 35 | All as per Srl. Item No. 10 here-in-before but Table 900x600x760mm with/without drawers. (FD-224 & 284) |
| 36 | All as per Srl. Item No. 10 here-in-before but Table Centre. (FD-274) |
| 37 | All as per item No 10 here-in-before but Book Case wooden. (FD-237) |
| 38 | All as per item No 10 here-in-before but Chair Easy. (FD-229) |
| 39 | All as per Srl item No 10 here-in-before but chair dinning. |
| 40 | All as per Srl item No 10 here-in-before but chair writing. |
| 41 | All as per Srl item No 10 here-in-before but chair dining cushioned. |
| 42 | All as per Srl item No 10 here-in-before but chair easy cushioned. |
| 43 | Spray painting to Almirah Medium Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required, complete all as specified and directed by Engineer-in-Charge. (FD-1032) |
| 44 | Spray painting to Almirah Large Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. (FD-1031). |
| 45 | Spray painting to table office clerk steel except top with synthetic enamel Olive Green paint internaly and externaly, after removing denting & dust, preparation of surfaces by providing putty and red oxide primer where required complete and providing 04 Nos rubber shoes ot table all as specified and directed by Engineer-in-Charge. (FD-381 & 1004, CCE/KLP/67) |
| 46 | All as per Srl item 13 here-in-before but table office officer. (FD-1002 & 1003) |
| 47 | All as per Srl. Item No. 13 here-in-before but table dining ORs including providing of 04 Nos. rubber shoes to legs of table. (FD-165(M). |
| 48 | Removing dents from the surface and applying two coats of synthetic enamel Gray paint to Book Case Steel complete all as directed by Engineer-in-Charge |
| 49 | Removing dents from the surface and applying two coats of synthetic enamel Gray paint to Rack Steel complete all as directed by Engineer-in-Charge |
| 50 | M & L for removing unsv top of Table 900 x 600mm by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1 mm thick decorative lamination including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 51 | All as per Srl item No 18 here-in-before but Table Dining 6 person |
| 52 | All as per Srl item No 18 here-in-before but Table 1200 x 900mm |
| 53 | All as per Srl item No 18 here-in-before but Table 900 x 900mm |
| 54 | All as per Srl item No 18 here-in-before but Table Dining 8 person |
| 55 | All as per Srl item No 18 here-in-before but Table Office Officers 1370 x 760mm |
| 56 | All as per Srl item No 18 here-in-before but Table Office Clerk 1200 x 600mm |
| 57 | All as per Srl item No 18 here-in-before but Table Centre 900 x 450mm (FD-274) |
| 58 | All as per Srl item No 18 here-in-before but Teapoy 600 x 450mm |
| 59 | All as per Srl item No 18 here-in-before but Table Peg 450 x 300mm Please Enable Macros to View BoQ information |
