|
| 1 | Chair dining (W) (Med Back):{CCE/KLP/SR/106(a)} Removing of unserviceable / broken parts of Chair dining without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak sizes as shown on drg and specified. |
| 2 | Rear leg (50x30x900mm). |
| 3 | Front leg.(50x30x400mm) |
| 4 | Back rest.(50x25x400mm) |
| 5 | Tightening of all parts/joints of whole Chair dining with bamboo pins. |
| 6 | Removing of old and unserviceable seat of 450x400x75mm from chair dining and supply and fix new seat made out of 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth approved shade as per sample shall not be less than Rs. 250/- per RM). |
| 7 | Supply and fixing only seat cover of tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM). |
| 8 | ALMIRAH LARGE/ MED STEEL :CCE/KLP/19 & 20 |
| 9 | M & L for removing unsv Leg by Supply and fix new leg of almirah large/medium steel made of 1mm thick M S sheet size all as per drg and duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer.(colour of shade as per directed by Engr-in-charge) |
| 10 | M & L for removing unsv lock by Supply and fix new lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - as per sample approval) |
| 11 | M & L for removing unsv handle by Supply and fix new handle mild steel CP 125mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. |
| 12 | M & L for removing unsv Shelf by Supply and fix new shelf of almirah large/medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 13 | M & L for removing unsv locking device by Supply and fix new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed by Engr-in-Charge. |
| 14 | All as per Srl. Item No. 2.05 here-in-before but almirah large Steel. |
| 15 | M & L for removing unsv door shutter by Supply and fix new door shutter of almirah medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 16 | All as per Srl. Item No. 2.07 here-in-before but almirah large Steel. |
| 17 | Spray painting to Almirah Medium Steel with synthetic enamel Olive Green/smoke gray/silver gray/ spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required, complete all as specified and directed by Engineer-in-Charge. (FD-1032) |
| 18 | All as per Srl item No. 2.09 here-in-before but spray painting with synthetic enamel Olive Green/smoke gray/silver gray/ paint externally portion only to almirah medium steel. |
| 19 | Spray painting to Almirah Large Steel with synthetic enamelOlive Green/smoke gray/silver gray/ spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. |
| 20 | All as per Srl item No. 2.11 here-in-before but spray painting with synthetic enamel Olive Green/smoke gray/silver gray/ paint externally portion only to almirah Large steel. |
| 21 | FORM WITH/ Without BACK CCE/KLP/29 (SR/66 & 67) |
| 22 | Removing old/unserviceable seat alongwith cushion of size 1200x450x50mm from foam with back/ without back and S&F new seat with cushion of size 1200x450x50mm duly upholshted with approved shade of tepaestry cloth as per sample |
| 23 | Removing old/unserviceable Back alongwith cushion of size 1200x525x50mm from foam with back and S&F new back with cushion of size 1200x525x50mm duly upholshted with approved shade of tepaestry cloth as per sample |
| 24 | CHAIR VARANDAH:CCE/KLP/23 |
| 25 | Removing of old/broken PU Arms from chair varandah and S&F new PU Arms as per sample and as directed by Engr-in-charge. |
| 26 | Removing of dents/bends from chair Varandah of every nature to its original shape and spray with synthetic enamel paint (white paint) OR approved shade and providing 04 nos rubber shoes to each chair complete all as per sample |
| 27 | Chair School steel cushioned with Hand Board (TP)(CCE/KLP/22) / |
| 28 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 29 | M&L for removing unserviceable arm by Supply and fix new arm of chair School as per sample kept in BSO yard all as directed by Engr-in-Charge. |
| 30 | M&L for removing unserviceable Hand board by Supply and fix new Hand Board (writing board) of chair School made out of 18/19mm thick Prelaminated partical board with PVC Beading size and specification as per drg and all as directed by Engr-in-Charge. |
| 31 | M & L for black painting to frame of Chair school steel with synthetic enamel paint of black colour and providing 04 nos rubber shoes to each chair all as specified and as directed by Engr-in-Charge. |
| 32 | Chair writing w/o Arm wooden: (CCE/KLP/05 /CCE/KLP/SR/109 ) Removing of unserviceable/broken parts of Chair writing without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak sizes as shown on drg and specified. |
| 33 | Rear leg (Curved Shape) (50x50x900mm). |
| 34 | Front leg.(50x50x400mm) |
| 35 | Side/Front/Rear stiffners (20x20x430mm) |
| 36 | Tightening of all parts/joints of whole Chair dining with bamboo pins. |
| 37 | Removing of old and unserviceable seat of 450x450x75mm from chair writing and supply and fix new seat made out of 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth approved shade as per sample shall not be less than Rs. 250/- per RM). |
| 38 | Supply and fixing only seat cover of tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM). |
| 39 | Chair Easy Wooden Curved shape Seat & Back (CCE/KLP/SR/135 / CCE/KLP/26) |
| 40 | Removing of old/unserviceable seat with cushion of size 490x450x75mm from chair easy and S&F new seat with cushion of size 490x450x75mm duly upholsted with tapestry cloth of approved shade fixed on 12mm plywood as per sample. Foam used shouldnot be less them 75mm thick with 32 dencity |
| 41 | Removing of old/unserviceable back with cushion of size 356x330x25mm from chair easy and S&F new back with cushion of size 356x330x25mm duly upholsted with tapestry cloth of approved shade as per sample. Foam used shouldnot be less them 25mm thick |
| 42 | Table Peg (CCE/KLP/09 / CCE/KLP/SR/122 ) |
| 43 | M & L for removing unsv top of table peg by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1 mm thick decorative lamination including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 44 | M & L for removing unsv legs by Supply and fix new legs of size 60x60x380mm made of 1st class hard wood teak size & shape all as directed and as shown on drawing. |
| 45 | M & L for removing unsv legs by Supply and fix new legs of size 45x45x380mm made of 1st class hard wood teak size & shape all as directed and as shown on drawing. |
| 46 | Table bed side Wooden (Large)(CCE/KLP/13 / CCE/KLP/SR/117)) |
| 47 | M & L for removing unserviceable back ply by Supply and fix new back plywood 6mm thick MR Gde of table bed side of size 400x450mm with all as shown on drg. (Make:- As per particular specification) |
| 48 | All as per Srl. Item No. 9.01 here-in-before but as in bottom plywood of drawer of size 425x388mm of table bed side. |
| 49 | M & L for removing unserviceable CP steel handle 75 mm long Supply and fix new CP steel handle 75mm long of table bed side with steel screw all as shown on drg and as directed by Engr-in-Charge. |
| 50 | M & L for removing unserviceable Telescopic channel by Supply and fix new telescopic channel of drawer size (18\\") and make all as directed by Engr-in-Charge. |
| 51 | M & L for removing unserviceable Telescopic channel by Supply and fix new telescopic channel of drawer size (14\\") and make all as directed by Engr-in-Charge. |
| 52 | Bed Hard Single Wooden :(CCE/KLP/01) |
| 53 | M & L for removing unserviceable Ply by Supply and fix new plywood of size 1960x930x12mm thick BWR grade of Bed Hard Single Wooden all as directed by Engr-in-Charge. (Make of As per particular specification) |
| 54 | S&F of new II nd class hard wooden bracket of size 150x150x35mm for Bed hard Single wooden all as directed by Engr-in-Charge. |
| 55 | Sofa Single Seater (TP) (CCE/KLP/200) |
| 56 | M & L for removing old faded Tepastry Cloth from seat and back and back side of Sofa including both side of Hand rest in lower side and S & F new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of sofa single seater (TP). cloth as per sample approved and all as specified and directed. |
| 57 | Sofa Two Seater (TP) (CCE/KLP/11-11) |
| 58 | M & L for removing old faded Tepastry Cloth from seat and back and back side of Sofa two Seater including both side of Hand rest in lower side and S & F new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of sofa Two seater (TP). cloth as per sample approved and all as specified and directed. |
| 59 | M & L for removing old faded Tepastry Cloth and old unserviceable cushion from seat and back of Sofa 2 Seater and S & F new Cushions of Seat & Back and also with new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of Sofa 2 Seater . cloth as per sample approved and all as specified and directed. |
| 60 | Sofa Five Seater (3+1+1) (TP) (CCE/KLP/11-11) |
| 61 | M & L for removing old faded Tepastry Cloth from seat and back and back side of Sofa 5 seater including both side of Hand rest in lower side and S & F new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of sofa Five seater (TP). cloth as per sample approved and all as specified and directed. |
| 62 | M & L for removing old faded Tepastry Cloth and old unserviceable cushion from seat and back of Sofa 5 Seater and S & F new Cushions of Seat (75mm thick) & Back (50mm thick) and also with new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of Sofa 5 Seater . cloth as per sample approved and all as specified and directed. |
| 63 | Chair Easy Three Seater/ (Sofa 3 Seater) (TP) (CCE/KLP/04) |
| 64 | M & L for removing old faded Tepastry Cloth from seat and back of Chair Easy Three Seater / (Sofa 3 Seater) and S & F new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of Chair Easy Three Seater / (Sofa 3 Seater) . cloth as per sample approved and all as specified and directed. |
| 65 | M & L for removing old faded Tepastry Cloth and old unserviceable cushion from seat and back of Chair Easy Three Seater / (Sofa 3 Seater) and S & F new Cushions of Seat (75mm thick) & Back (50mm thick) and also with new Tepastry Cloth of best quality not less than Rs 274/- per metre all as per specified in drawing of Chair Easy Three Seater / (Sofa 3 Seater) . cloth as per sample approved and all as specified and directed. |
| 66 | Chair Computer (TP) (CCE/KLP/SR/45 & 46 & 48) |
| 67 | M & L for removing old unsv Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assy as per sample inculding tighting the frame work etc. Model No Trade Pattern |
| 68 | M & L for removing old unsv Poly Urathene Armrest by S & F new arm rest of superior quality as per sample including nut and bolts. Model No Trade Pattern |
| 69 | M & L for removing unsv pedestal assy by S & F new pedestal assy including tighting the frame work. Model No Trade Pattern |
| 70 | M & L for removing unsv castor wheel by S & F new castor wheel of superior quality including tighting the frame work. Model No Trade Pattern |
| 71 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 72 | CHAIR CBA STEEL WITH ARMS \\"S\\" Type (CCE/KLP/SR/35) |
| 73 | (a) M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11\\" x 2\\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\\" x 2\\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge.(b) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (c) S&F Plywood 12mm thick commercial size 18\\" x 17\\" fixed on welded MS Flat (Iron) with the help of suitable Nut & Bolt with washer for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tepestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work .(d) S&F Plywood 12mm thick commercial size 18\\" x 15½\\" fixed on welded MS Flat (Iron) with the help of suitable Nut & Bolt with washer for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tepestry cloth with the help of suitable stappler pin and upholstery work .Note : Tepastry cloth (Not less than 220/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge and after preparation of seat and back same covered with packing plastic material (thin packing Plastic Roll) |
| 74 | Removing the broken seat and replacing it with new seat woven with 2mm wide plastic cane of primier /shah/Maharastra Polycane Industries brand as per Godrej pattern to be fixed with 04 Nos machine nuts and bolts of size 85x4 mm with washer to Chair CB Steel with arm/ without arm, frame of seat shall be made of best quality 2nd class seasoned hard wood ,free from knots and infection all as specified and shown on drg and shall be painted with two coats of black synthetic enamel paint over a coat of wood primier. (FD-75(M). |
| 75 | All as per Srl item No. 16.02 here-in-before but back of Chair CB Steel with arm/without arm.(FD-75(M). |
| 76 | M&L for removing old Arm by Supply and fix new arm to chair CB steel with arms made out of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint size as per Drg and as directed by Engr-in-Charge. |
| 77 | M & L for painting to frame of chair CB Steel with arms/withour arms with synthetic enamel olive green paint including preparation of surface with rubbing with emery paper and providing 02 Nos PVC cap at top of Back frame of MS pipe and 04 Nos PVC shoes at bottom of frame of MS round pipe as specified and directed by Engineer-in-Charge. (FD-75(M). |
| 78 | Chair dining with cushioned (Steel):(CCE/KLP/SR/03) |
| 79 | Removing of old and unserviceable seat of size 450x400mm from chair dining and supply and fix new seat made out of 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 50mm thick of 32 density, (Tapestory cloth approved shade as per sample shall not be less than Rs. 250/- per RM). |
| 80 | All as per Srl. Item No. 17.01 here-in-before but Back of size 400x400mm |
| 81 | M & L for painting to frame of chair dining steel with synthetic enamel Black paint including preparation of surface with rubbing with emery paper and 04 Nos PVC shoes at bottom of frame of MS round pipe as specified and directed by Engineer-in-Charge. |
| 82 | Class Room Chair steel cushioned with Writing Pad (TP)(CCE/KLP/SR/137) |
| 83 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 84 | M&L for removing unserviceable arm by Supply and fix new arm of Class Room chair as per sample kept in BSO yard all as directed by Engr-in-Charge. |
| 85 | M&L for removing unserviceable Hand board by Supply and fix new writing pad (writing board) of classrom chair made out of 18/19mm thick Prelaminated partical board with PVC Beading size and specification as per drg and all as directed by Engr-in-Charge. |
| 86 | M & L for black painting to frame of class room Chair with synthetic enamel paint of black colour and providing 04 nos rubber shoes to legs all as specified and as directed by Engr-in-Charge. |
| 87 | Charpoy GI Hard Ply Top (FD-220)/CCE/KLP/SR/102, 176 & 187) |
| 88 | M & L for removing unserviceable long rail of charpoy by S & F new 32mm GI pipe long rail of Make : (As per particular specification) confirming to IS duly threaded at both end as required and fixing including tightening the frame work all as shown on drawing. |
| 89 | M & L for removing unserviceable check nut of charpoy by S & F new 32mm GI check nut of Make : (As per particular specification) confirming to IS incl tightening the frame work all as shown on drawing and as directed. |
| 90 | M & L for removing unserviceable GI 3way elbow of charpoy by S & F new 32mm GI 3way elbow of Make : (As per particular specification) confirming to IS incl tightening the frame work all as shown on drawing and as directed. |
| 91 | Labour only for making short rails from the unserviceable long rail parts under item No. 20.01 above including cutting and threading at the both ends and fixed in position complete all as per drg and as directed by Engr-in-Charge. |
| 92 | Labour only for making leg from the unserviceable short rail under item no 20.04 above including cutting and threading at one end and another side new 3mm thick MS sheet base plate welded at bottom fixed in position all complete as per drg and directed by Engr-in-Charge. |
| 93 | M & L for removing unsv plywood and S & F plywood commercial 12mm thick BWP grade ISI marked of Make : (As per particular specification) of size size 1980x900mm all as directed by Engr-in-Charge. |
| 94 | Material and labour for French polishing to Chair dining (W) (Med Back):{CCE/KLP/SR/106(a)} after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as directed by Engineer-in-Charge. |
| 95 | All as per Srl item No 20 here-in-before but Chair writing w/o Arm wooden: (CCE/KLP/05 /CCE/KLP/SR/109 ) |
| 96 | All as per Srl item No 20 here-in-before but Chair Easy Wooden Curved shape Seat & Back (CCE/KLP/SR/135) |
| 97 | All as per Srl item No 20 here-in-before but Table Peg (CCE/KLP/09 / CCE/KLP/SR/122 ) |
| 98 | All as per Srl item No 20 here-in-before but Bed Hard Single Wooden :(CCE/KLP/01) |
| 99 | All as per Srl item No 20 here-in-before but Table Centre 2 tier CCE/KLP/SR/27 |
| 100 | All as per Srl item No 20 here-in-before but Table Dining 1200x900x750mm (CCE/KLP/SR/30/200) |
| 101 | All as per Srl item No 20 here-in-before but Table Dining 1800x1150x750mm (CCE/KLP/SR/82/200) |
| 102 | All as per Srl item No 20 here-in-before but Table Dining 6 person (CCE/KLP/16) |
| 103 | All as per Srl item No 20 here-in-before but Table 3' x 2' (CCE/KLP/SR/26) |
| 104 | All as per Srl item No 20 here-in-before but Table dining 1000 x1000mm (CCE/KLP/SR/120) |
| 105 | S&F for fixing of hard PVC shoes to legs of any type of wooden furniture with screw all as directed by Engr-in-Charge. |
| 106 | M & L for removing unsv top of Table 900 x 600mm by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1 mm thick decorative lamination including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 107 | All as per Srl item No 22 here-in-before but Table Dining 6 person |
| 108 | All as per Srl item No 22 here-in-before but Table 1200 x 900mm |
| 109 | All as per Srl item No 22 here-in-before but Table 900 x 900mm |
| 110 | All as per Srl item No 22 here-in-before but Table Dining 8 person |
| 111 | All as per Srl item No 22 here-in-before but Table 1000 x 1000mm |
| 112 | All as per Srl item No 22 here-in-before but Table Office Clerk 1200 x 600mm |
| 113 | S&F of new II nd class hard wooden bracket of size 100x100x35mm with steel screw between the Stiffner/rail and legs of all type of Wooden Tables all as directed by Engr-in-Charge. |
| 114 | S&F of new II nd class hard wooden bracket of size 75x75x25mm with steel screw between the Stiffner/rail and legs of all type of Wooden Chairs all as directed by Engr-in-Charge. |
| 115 | M & L for removing unsv Handle and S & F new handle size 100mm long for Table Bed Side/Bin linen muilt/table computer/table writing/dressing ladies etc.(as per sample held with BSO Yard) all as directed by Engr-in-Charge. |
| 116 | M & L for removing unsv Hinges and S & F new hinges size 50mm long for Table Bed Side/Bin linen muilt/table computer/table writing/dressing ladies etc. (as per sample held with BSO Yard) all as directed by Engr-in-Charge. |
| 117 | M & L for removing unsv/broken Glass pan and S & F new Glass Pan 4/5mm thick polished by four sides for smoothly slide in channle or door frame for below mentioned items . all as directed by Engr-in-Charge.Show case glazed/ TV Trolly/Book Shelf (1200 x 600mm) & ( 1500 x 750mm) & (1800 x 2000mm)/Side Board (1500 x 750mm) / Notice board etc |
| 118 | M & L for removing unsv Mirror and S & F new Mirror 5mm thick for dressing Gents (drg No. CCE/KLP/17) Make : (As per particular specification) all as directed by Engr-in-Charge. |
| 119 | Locker bed side steel (750x485x900mm) CCE/KLP/46 |
| 120 | M & L for removing unsv lock by Supply and fix new lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - as per sample approval) |
| 121 | M & L for removing unserviceable socket by Supply and fix new mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod, all as specified and shown on drg and all as directed by Enge-in-Charge. |
| 122 | M & L for removing unsv handle by Supply and fix new handle mild steel CP 125mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. |
| 123 | M & L for removing unserviceable hanging rod by Supply and fix new hanging rod 19mm dia 1.0mm wall thickness conduit pipe of SS of length 380mm approx all as specified and all as shown on drg. |
| 124 | M & L for removing unserviceable hinge by Supply and fix new 75mm long MS hinges to door shutter of locker bed side steel including revetting all as directed by Engr-in-Charge. |
| 125 | Spray painting to Locker Bed side Steel with synthetic enamel Olive Green/smoke gray/silver gray/ spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required, complete all as specified and directed by Engineer-in-Charge. |
| 126 | All as per Srl item No. 29.06 here-in-before but spray painting with synthetic enamel Olive Green/smoke gray/silver gray/ paint externally portion only to Locker Bed Side Steel |
| 127 | Table Office clerk steel (CCE/KLP/67) |
| 128 | Supply and fixing in replacement of lock with new brass lock 4 lever of table office officers/ clerks steel of approved best quality with duplicate keys all as specified. (Make of Lock:- Godrej/Harrison/Link). |
| 129 | Replacement of unserviceable PVC Catch Black (Handle) of drawers of table office clerks steel with new PVC Catch Black (Handle) drawers with locking arrangement shape and size all as per shown on drg. |
| 130 | Removing dents / bends of any nature to its original shapes and spray painting to Table Office Clk with one coat of synthetic enamel paint OG/ Black |
| 131 | Tighting of loose nut & bolts/ rivit and replace unserviceable with new |
| 132 | Dressing table with mirror ladies: CCE/KLP/18 |
| 133 | Removing of old unserviceable hinges 2\\" from dressing table ladies and replace the same with new hinges 2\\" as per drg |
| 134 | Removing of old unserviceable door handle 3\\" (D type) from dressing table ladies and replace the same with new door handle as per drg |
| 135 | Removing of old unserviceable Bottom Mount Drawer Slides (13\\") of drawer from dressing table ladies and replace the same with new Bottom Mount Drawer Slides with power coated in white color as per drg |
| 136 | Removing of Old unserviceable/Broken Mirror from dressing Table ladies and replace the same with new Mirror size 1041mm x 600 x 5.0mm thick (Top side Half round Shape) complete all as per drg. |
| 137 | Removing of Old unserviseable back ply from dressing Table ladies and replace the same with new Back Ply 6mm thick commercial ply wood size as per drg and complete as specified and directed. |
| 138 | M & L for removing unsv Lock of Table Computer (Drg No. CCE/KLP/06) by Supply and Fix New lock all as directed and as shown on drawing. |
| 139 | All as per Srl item No 32 here-in-before but Table Writing (900 x 600 x 760mm) Please Enable Macros to View BoQ information |
