|
| 1 | S/F of 34/36 Watt (2 x 2)LED square recess mounted panel Lights (Make-Havells/Philips/Crompton or equivalent.) |
| 2 | S/F of 18W/20W Basic all purpose surface and wall mounted LED batten with Polycarbonate housing & integrated electronic driver. (Make-Havells/Philips/Crompton or equivalent.) |
| 3 | S/F. Of 48\\"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make. |
| 4 | S/F. Of 400mm Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make |
| 5 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 6 | S/F of 70 W Street light-ENDURA CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Phillips/Havells/bajaj/Equivalent) as per the direction of Engineer in Charge |
| 7 | Supply of 16M high mast shaft consoul's in two sections suitable for 55 m/sec wind speed along with head frame, luminaires carriage suitable for 12 luminaires in symmetrical arrangement and other accessories manufactured in factory. |
| 8 | Supply of raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation). |
| 9 | Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. |
| 10 | Supply of LED floodlight type HAVELLS 200W. |
| 11 | Supply of LED type single dome aviation obstruction light. |
| 12 | Supply of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. |
| 13 | Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. |
| 14 | Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour. |
| 15 | Provision of GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required) |
| 16 | Installation of the mast feeder pillar by grouting the stand in concrete. |
| 17 | Supply of 1.5TR high wall 5 star inverter type split A.C Copper Split type A.C.machines of 5- Star rated Make.Make:Toshiba/Hitachi/Carrier/Diakin/Voltas/LG/Mitsubi |
| 18 | REFRIGRANT PIPING-Supply,installation of hard/soft copper refregrant piping,complete with fitting ofbends and other nesessary material to complete the job. 1TR to 3 TR high wall split A.C |
| 19 | FRAME WORKSupply,installation & fabrication of MS base frame for both indoor and outdoorunit and other nesessary material to complete the job1 TR to 3 TR high wall split A.Cnstallation charges of AC machine. |
| 20 | CONTROL CABLE-Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete thejob,25mm nom. Dia pipe. |
| 21 | Supply,laying of control cable and other nesessary material to complete the jobFor 1 TR to3 TR high wall split A.C |
| 22 | Supply and fixing of 4 kVA Voltage stabilizer (Make-V-Guard/Microtek/Alfa (90 to 240volt) |
| 23 | 4 X 6 sq.mm + 2 X 2.5 sq.mm in 32 mm dia |
| 24 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 25 | s/f of ac point consisting of 32A industrial socket with 32A starter with all connection compelete s per the direction of engineer in charge |
| 26 | S/F of 40x42x12 no 16/18 SWG sheet metal for main 250amp panel board having 250 amp MCCB 36 KA as incommer,250 amp electrolyte cu bus bar and 100A, 25 kA FP MCCB-4No.40 amp dp mcb 2 nos as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge (make: Siemens / legrand/Schneider/Equivalent) Please Enable Macros to View BoQ information |
