|
| 1 | Works |
| 2 | Single Bed With Mattress Providing, Fixing & Erecting bed in Teakwood in melamine polish finish. With 12mm thk ply in 0.8mm thk laminate with all necessary hardware as per detail drawing. Mattress (with Pillow) : P & F Nilkamal/Wakefit/KurlOn Econil 5-inch Double Bonnell Spring Mattress introduces you to the ultimate experience of peaceful sleep. With proven support of Bonnell spring, it ensures long-lasting durability and the extra bounce of comfort to your lazy days in bed while it’s soft cotton layers and edgy corner prevents the mattress to roll off from the bed Dimension : 900mm x 2000mm x 450mm, Materials : Main Structure : Teakwood 38mm Thk, Top : 12 mm Ply, Head Board : Teak Wood, Finish : Melamine Polish (Machine Spray), Hardware : 12mm PVC buffer, Nails, Fevicol etc. as directed by Engineer-in-charge. |
| 3 | Side Table Providing, Fixing & Erecting side table in 19 mm thk structure with 1 no. drawer in approved laminate finish with all necessary hardware line drawer channel, lock and handles etc. as per the detail drawing. Materials : Main Structure : 19mm Ply, Drawer : 12 mm Ply, Finish : All External visible surface in 1.0mm thk laminate finish and Internal surface in 0.8mm thk laminate finish. Hardware : 12mm PVC buffer, Nails, Fevicol, Drawer Chanel etc. as directed by Engineer-in-charge. (a) Dimension : 600mm x 450mm x 400mm |
| 4 | (b) Dimension : 450mm x 450mm x 400mm |
| 5 | Study Desk - Providing, Fixing & Erecting 38mm thk study desk in 19mm thk commercial in approved laminate and all necessary hardware like wire managed etc. as per detail drawing. Chair : Nilkamal Concept Mesh Office Revolving Chair CRP, Top : 38mm Thk Materials : Main Structure : 19mm Ply, Finish : All External visible surface in 1.0mm thk laminate finish, Hardware : Screw, Nails, Fevicol etc. as directed by Engineer-in-charge. (a) Dimension : 1200mm x 750mm x 530mm |
| 6 | (b) Dimension : 935mm x 750mm x 530mm with O/H Cabinet |
| 7 | Low Ht. Storage : Providing, Fixing and Erecting storage in 19 mm thk ply with open able shutter in approved laminate finish with all necessary hardware like shelves pin, magnet, L hinges, Lock and latch etc as per the detail drawing. Top : 38mm Thk and 580 mm Deep, Materials : Main Structure : 19mm Ply, Shutter : 19 mm Ply, Storage back : 12mm Ply, Finish : All External visible surface in 1.0mm thk laminate finish and Internal surface in 0.8mm thk laminate finish. Hardware : Screw, Nails, Fevicol, L Hinges etc. as directed by Engineer-in-charge. (a) Dimension : 1740mm x 637mm x 400 mm |
| 8 | Wardrobe : Providing, fixing & erecting wardrobe in 19mm thk ply with Drawers, shelves in both side laminate finish inducing Mirror and all necessary hardware as per detail drawing. Including Printed Graphics, Materials : Main Structure : 19mm Ply, Shutter : 19 mm Block Board, Back : 12mm ply + 4mm thk MDF for graphic, Shelf : 19 mm Thk Ply, Mirror : Finish : All External visible surface in 1.0mm thk laminate finish and Internal surface in 0.8mm thk laminate finish. Hardware : Tower Bolt, Magnet, Lock, Screw, Drawer Channels, Nails, Fevicol, L Hinges etc. as directed by Engineer-in-charge. (a) Dimension : 4627mm x 2000mm x 600mm, Top : 38mm Thk. |
| 9 | PANELLING without paint above wardrobe : Providing, fining & erecting wall paneling in 19mm thk play and gypsum board to close the gape between wardrobe and beam/slab as per actual site condition. The rate is inclusive of all necessary hardware as per drawing, Gypsum board (Mainly used for wall / column leveling purpose) Cladding: 19 mm thick Ply boxing above wardrobe as directed by Engineer-in-charge. |
| 10 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.Extra over item 57 for every subsequent coat of wall painting with plastic emulsion pain of approved brand. |
| 11 | Curtain:Supply and installation of curtains of aprroved make as per architect selection.main fabric with channel,fitting & 3 pplt curtain stiching , fire retardant fabric,dimout TEXTURE SA 1729WITH FR SHADE 53013,330 GSM,100% POLYSTER,140 CMS WIDTH,POWER COATED SMOOTH CHANNEL,3PLT STICHING WITH FITTING.WINDOW SIZE 4.3 MTRS X 3MTRS. Work complete including all type of stitching, fixing, accessories, inclusive of installation, material cost, labour, wastage, operating system all tools tackles, scaffoldings, hardware at all floors, all levels and heights, necessary edge binding with approved fabric and thread of colour similar to the colour of the blinds. Same rate shall be applicable for all heights and for all floors. Maximum size of curtain shall not exceed 4.85m along the length of the opening and 3.050m along the height of the opening. & height will be measured from top of the pelmet to sill bottom lvl. height will be measured from top of the pelmet to sill bottom lvl, as directed by Engineer-in-charge. |
| 12 | Pelmet: Providing, fixing & erecting wooden pelmets of up to 150 mm x 150mm L shape made of 19mm thick ply as per IS 710 and beading of 4mm thick and 25mm wide Ghana Teak wood for projection screen. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc should also take load of all the all roller blinds as directed by Engineer-in-charge. |
| 13 | Providing & fixing S.S. Aldrop 30 Cm long of ASIS 304 Grade as per approved design, shade and pattern as directed by Engineer-in-charge.as directed by Engineer-in-charge. |
| 14 | Providing & fixing Door Stopper as directed by Engineer-in-charge. |
| 15 | Providing and fixing Mortise lock of Godrej or equivalent make as per approved design, shade and pattern as directed by Engineer-in-charge. |
| 16 | Providing and fixing mirror thickness 5mm thick over wall or vertical surface including fixing of 12 mm plywood at backside including fixing with brackets, glue, silicon etc. complete as per the approved design, shade and pattern as directed by Engineer-in-charge. |
| 17 | Full Ht Wooden Partition : Providing & fixing of full height (3600mm ht) wooden Partition using Aluminum tube frame work shall comprise of 50 mm x 25 mm Aluminum tube (Medium Gauge, Jindal Make) members at regular distance of 600 mm c/c both ways and both side covered with 8 mm th specified Ply & also one more layer of 4 mm specified MDF on both side of partition for groove pattern with raw plywood finished as shown in the drg with necessary hardware.etc . Please Enable Macros to View BoQ information |
