|
| 1 | Works |
| 2 | Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm |
| 3 | Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [E] CAT - 6 |
| 4 | SITC of IP20, IK02, indoor, ceiling suspended/concealed/open surface 30W/40W per meter Linear Profile type type fixture with all required accessories. Luminaire made of die-cast aluminium for better thermal management. Die-cast aluminium inner ring with reflector for uniform light distribution. High PF constant current LED driver. Cable entries for through-wiring of mains supply cable. 48-50° beam angle. Suitable for operation on 240V, 50Hz single phase ac supply. Safety class II. Powder coated body colour as per approved by the architect/consultant. |
| 5 | SITC of IP20, indoor, concealed, 600mmx600mm square shape 40W Panel Light type fixture with all required accessories. LED ceiling recessed panel light - Indoor luminaire with soft & even light distribution. Powder coated CRCA housing with aluminium front frame. High efficiency translucent diffuser for glare free, uniform light distribution. The Luminaire Integrated with 40W LED. Cable entries for through-wiring of mains supply cable. Prewired with constant current LED driver and suitable for operation on 240V, 50Hz single phase ac supply. Ordering guide : KL-2281-CCT ( Colour Temperature ). Available CCT : 3000K, 4000K, 6000K. White powder coated body colour or as per approved by the architect/consultant. |
| 6 | Providing and erecting required size Copper Wire/strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp. |
| 7 | SITC of Galvanized Steel Flat 25x6/25x3 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding. |
| 8 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A) 4 core 10 Sq. mm |
| 9 | Supply & installation of surface mounted floor trunking raceways, fabricated of the base and sides with all accessories like removable covers, joints Complete. (b)Size: 100x37 mm Raceways for Power & Data. |
| 10 | Providing & erecting Fiber Optic Cable, 50/125μ, OM2/3 Outdoor Shall be 50μ, Single/Multi mode OM2/3 non-metallic armored cable as per ISO/IEC- 11801 Shall be able to meet Gigabit & 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae (10G Base-X) Shall be suitable for using in the building shaft and outdoor laying, Shall be Unitube Jacketing Material Shall be HDPE with nominal thickness of 2.1mm and overall diameter (Nominal ) 06 to 12core Make: Finolex, Dlink, Syrotech or Eaquivalant |
| 11 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (G) 12 core 2.5 sq.mm For DG Alerm Cable |
| 12 | Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (F) 110 mm inner Dia. |
| 13 | Providing and erecting ISI Marked 3core 240 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS- 7098 to be laid on wall with clamps or in provided cable trench / pipe approved manner as directed. |
| 14 | Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed |
| 15 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (B) 4 core 4 Sq. mm |
| 16 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) |
| 17 | Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 95 & 120 Sq.mm (A) Outdoor type |
| 18 | H.T. Work Supply, Unloading, Shifting at site, installation, testing and commissioning of 11 KV Outdoor HT RMU - 1 Nos. of 11 KV 630 A Load break switch as a incomer & 11 KV 630 A, 350 MVA 2Nos. SF6 breaker as outgoing with termination and foundation as per specification and SLD |
| 19 | SITC FP MCB Enclosure of IP65 Water Tight Junction Box with 63AFP ELMCB 100MA With necessary clamp for mounting of the J.B. J. B. Should be provided with cable Connectors + IP65 Glands + IP65 Grommets. connectors to connect 2 nos. of 6/10 sq. mm. x 4 core cables+ Earthing wires. |
| 20 | H.T. Work Supply, Unloading, Shifting at site, installation, testing and commissioning of 11 KV Outdoor HT MCU including CT and PT , Metering Unit and Required Accessories for Torrent main HT power - 1 Nos. of 11 KV Load break switch as a incomer & 11 kv VCB breaker as outgoing as per specification. |
| 21 | SITC of Sub HVAC Power Panel , As per Single Line Diagram Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications.It has Incomer - 400A ATS Esco make or equilevant, 400 A FP MCCB.160 A Mccb Fp .V meter, A meter, CT-pt, Selector switch, Allu. Busbars EC Grade, Multifunction meter, and Outgoing Fp mcb 63 A-9 nos, Dp MCB 32 A -6 nos ,Cable Alley. |
| 22 | Supply & erecting of of Stainless Steel Plate for floor Junction Box. 400x400mm |
| 23 | Supply, Installation, Testing & Commissioning of Outdoor Lighting Panel. |
| 24 | Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM- 80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. 150 watts (Green) Make: As per Approved by Architech |
| 25 | Supplying and erecting approved make online Uninterruptible Power Supply system comprising flat cumboost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. [L]40 KVA 3 - phase with 1Hr Backup |
| 26 | Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, \\"A\\" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12/ 24 volts electric starting equipment complete with standard battery, dynamo, cut-outs, ammeter, necessary wiring, starter etc and heavy duty Residential type exhaust silencer (With DEF System) and, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate 380 KVA DG set should have in built fuel tank capacity of minimum 8 hrs of continous running capacity on full load . Erection, commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .) (T) Continuous rating of 380 KVA ,BHP not less than 480 BHP |
| 27 | Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity (E) AMF Control Panel for 380 KVA 3 phase DG Set |
| 28 | Supplying and erecting Acoustic enclosure (canopy) made out of 18 SWG, CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 The resin bonded Rockwool / PU FOAM covered from inside level not more than 75 dB at a distance of 1 mtr, as PVCT norms , on provided foundation suitable for following size of DG Set. The enclosures for following capacity of DG sets.(F) For 380/500 kVA |
| 29 | Supply, Installation, Testing & Commissioning of Rodent Repellent System for Server Rooms with Controller, 230 V AC/50 HZ Controller, Dimensions 200 mm x 300 mm x 85 mm (Width X Depth X Height) Weight 3.5 Kgs Approximately Power Consumption 15 Watts Approximately Voltage 14 Volts AC Transformer Rating 25 V.A. with 3 to 5 nos. of Rodent Repellent Transducers Suitable for Controller including Mounting bracket for Controller and required 0.5 SQ MM x 2 Core Flexible (14/40)SWG Multistranded Speacially Coated CT wiress up to 50 mtr. Make: Maser, R-scat or equivalent or as per Architect approval. Please Enable Macros to View BoQ information |
