Name of Work:- Installation of Solar Light at Phansidewa II Sansad (03 NOS)
Sl. No.
Item Description
1
Supply for fitting of 12 watt & 2000 lumesns All in one solar LED street light Luminaires having polycrystalline solar cell.Details technical apecification given below: A. System Wattage: Should not be more than 12 Watt (+/-5%) B. System Lumen output: should be less than 2000 lumen.C. System Efficacy: Should not be less than 180 lumens/watt.D. battery chemistry: lithium Ferro phosfate(LiFepo4) battery should be used.E. Battry Capacity: >170 Wh. F.Charging Electronics: Itegrated MPPT chargerwith driver.G. Charger Efficiency: > 90% H. Driver Efficiency: > 90% I.Led Burning Hours: Should be > 50000 Hrs. @ L70/.J. IP Rating:IP65 K. Housing: Aluminum Pressure Die Cast./L. front cover: UV stabilized Polycarbonate cover should be used for better light distribution. M.CCT(Color Temperature ):5700k(+/-5% )/ N. CRI:>70(+/-5%) O. luminaire should have in - built PIR sensor./ P.charging & discharge LED indicator:Should be privided in luminaire. Q. Input Voltage:12V DC/. R.Adjustable Tilt Angle (Deg.) : Should be 0-15 Deg. adjustable . S.Sollar cell Efficiency : Min. 12%, polycrystalline./ T. Operating Temp Range for Light Engine : 0to +35 Deg. C. U. operating Humidity :Up to 95%/ V.safety of solar panel Module: IEC 61730-1,2 &IEC 61215 X. Manufacturer should provide LM79 / LM80 reports corresponding to the luminaire / LED chip along with Type Test Certificate. Warranty -3-years warranty against manufacturer defects from date of supply. luminaire Make : Philips BRP710 LED 22CWMR S1 12V LFP AIO Solar Equip INor equivalent model.
2
Street Light Pole Power Pole 76mm dia total lenght 5.0 m module mounting structure tilt able & adjustable . To sun angel mounted on the top of the pole luminary Arm 40mm dia with 1.00 m reach for fixing the Luminaire surface finich corrosion resistant Enamel plant.
3
Extra cost of civil work with PCC work includimg fitting fixing, Transporation
4
Providing & fixing Sign Board with two legged iron angle height 2.0m. and iron sheet of size 900 x 750 complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of angle, concrete, iron sheet etc. complete.)
5
SGST @ 9.0 %
6
CGST @ 9.0 %
7
CESS @ 1.0 % Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
