|
| 1 | Dismantling the existing C.C Road for Laying pipe including all lsbour charges etc complete For Pipe Line |
| 2 | Earth work excavation for laying pipe in various types/ sizes of pipe for all types of Strata including hard stiff clay stiff block cotton,hard red earth shales murams gravel stony earth and earth mixed with small sizes boulders and gravally soil, soft disintegrated rock laterite soft rock or kanker not requiring blasting, medium rock dense medium rock not requiring blasting, medium rock dense medium rock requiring blasting, hard rock requiring blasting and depositing on bank with in an initial lead of 10 m and initial lift of 2m including shoring strutting and all the incidential works providing danger light barricading conveying and disposing the surplus earth etc DI Pipe |
| 3 | Supply and delivery of following Sizes of D.I Socket/Spigot K9 Pipes as per IS 8329/2000 including loading, frieght,transit insurance all taxes,unloading and stacking at site as directed by departmental Officers 150mm DI Pipe |
| 4 | Jointing the following sizes of C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials). 150mm DI Pipe |
| 5 | Lowering the following sizes of DI Pipes to trench,lowering and laying to proper Grade and alignment etc. 150mm DI Pipe |
| 6 | Lifting and positioning of C.I / G.I / DI/ MS Pipes in vertical direction for service reservoir pipeconnection For 150mm DI Pipe 0 to 2 m |
| 7 | 2 to 4 m |
| 8 | 4 to 6 m |
| 9 | 6 to 8 m |
| 10 | 8 to 10 m |
| 11 | 10 to 12 m |
| 12 | 12 to 14 m |
| 13 | 14 to16 m |
| 14 | Refilling the trenches with excavated earth other than sand in layers of 15cm thick,watering, well rammed and consolidated etc., complete 150mm DI Pipe |
| 15 | Supply and delivery of following size D.I specials as per IS 9523/2000 including loading, frieght,transit insurance all taxes,unloading and stacking at site as directed by departmental Officers ALL SOCKET |
| 16 | ALL FLANGE |
| 17 | Supply and delivery of following specials including all cost etc complete Bolt & Nut |
| 18 | Rubber Insertion Sheet |
| 19 | Supply and Delivery of DUCTILE IRON CLASS PN10 FLANGED PIPES AS PER IS 8329/2000 1 m length of pipes etc complete 300mm dia DI Sluice valve |
| 20 | 250mm dia DI Sluice valve |
| 21 | 150mm dia DI Sluice valve |
| 22 | Supply and delivery of 1250 lpm x 40m Head Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3core suitable copper flat submersible cable etc For Gandhinagar Sump 20HP Motor |
| 23 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch,Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately).20.00 HPFor Gandhinagar Sump 20HP Motor |
| 24 | Supply and delivery of DI DF GATE SLUICE VALVES Resilient seated soft sealing gate valves(Sluice valves) with body Bonnet of ductile Cast Iron of grade GGG 40 or equivalent grade, wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- ring proction on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS 5163- 89/ ISI 4846-2000/DIN 3202 F4. All the valves should be with electeostatic powder coating both inside and outside with pocketless stright through body passage. all the valves are to be compatible buried application with pressure rating PN 10/16 and with 5years warrenty300mm dia DI Sluice valve |
| 25 | 250mm dia DI Sluice valve |
| 26 | 150mm dia DI Sluice valve |
| 27 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixingand jointing submersible cable with proper clamps upto the starter to required depth andalso fixing of riser pipes to the required depth valves erection clamps, pressure gauges uptothe exterior wall of pump room and erection of panel board consisting of TPICN switchesstarter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasingpreventor, water level guard and laying and jointing the cables and twin earthing as per IErules etc., complete 20.00 HP For Gandhinagar Sump |
| 28 | Towards the cost of Fixing Labour charges for Sluice valve including all cost etc.complete. 300mm dia DI Sluice valve |
| 29 | 250mm dia DI Sluice valve |
| 30 | 150mm dia DI Sluice valve |
| 31 | GST-18% Please Enable Macros to View BoQ information |
