Tender For Augmentation Of Lwss Badwal Ansoli & Matour In Tehsil And District Kangra H.P. (Sh:- Laying, Jointing And Testing Of Disribution System 25Mm Dia = 5520 Rmts, 65Mm Dia = 5800 Rmts And Dismentalling, Relaying Of Gi Pipe 50Mm Dia And 80Mm Dia, Kangra-Himachal Pradesh
TDR : 55849805
Tender Notice
BOQ
8 Days Left
Kangra
Himachal Pradesh
Tender For Augmentation Of Lwss Badwal Ansoli & Matour In Tehsil And District Kangra H.P. (Sh:- Laying, Jointing And Testing Of Disribution System 25Mm Dia = 5520 Rmts, 65Mm Dia = 5800 Rmts And Dismentalling, Relaying Of Gi Pipe 50Mm Dia And 80Mm Dia
Name of Work:- Augmentation of LWSS Badwal Ansoli & Matour in Tehsil and District Kangra H.P. (SH:- Laying, Jointing and Testing of Disribution system 25mm Dia = 5520 Rmts, 65mm Dia = 5800 Rmts and Dismentalling, Relaying of GI Pipe 50mm Dia and 80mm Dia at differents RDs). Estimated Cost- 2087721/- Earnest Money-38820/- Time Limit- Three Months
Sl. No.
Item Description
1
Excavation in foundations,trenches etc in earth work in all kind of soil, such as pick work, jumper work, blasting hard or soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water with in all heights, stacking the excavated soil within all leads clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetres) layers, when required into plinths, of foundations etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth, as per the direction of Engineer-in-Charge with in all leads and lifts.
2
Dismentalling of galvanised mild steel tube and tube i/c joints (cost of excavation is to be measured and paid for separately) complete in all respect of following nominal bore within all leads & lifts.
3
50mm dia (L)
4
80mm Dia (L)
5
Re-laying, jointing & testing of screw and socket Galvanised Mild steel tube of Light grade of approved make or approved rate contract of DGS & D/HP Government confirming to BIS 1239-1990 (Part-II) of following diameter including all tube fitting are required complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads & lifts. (Cost of excavation earth work with be measured and paid separately.)
6
50mm dia (L)
7
80mm Dia (L)
8
Laying, jointing & testing of screw and socket Galvanised Mild steel tube of Light grade of approved make or approved rate contract of DGS & D/HP Government confirming to BIS 1239-1990 (Part-II) of following diameter including all tube fitting are required complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads & lifts (Cost of excavation earth work with be measured and paid separately.)
9
25mm Dia (L)
10
65mm Dia (L)
11
Providing and fixing Gun metal Gate valve/Peet valve of following dia ISI marked with hand wheel complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge with all leads and lifts.
12
25mm Dia (M)
13
50mm Dia (M)
14
65mm Dia (M)
15
80mm Dia (M) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
