|
| 1 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to thedumping ground within 50 metres lead : |
| 2 | (a) With cement mortar 1:4 (1 cement: 4 fine sand) |
| 3 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessaryrepairs to scratches etc. complete.: |
| 4 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 6 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 7 | 10 litre capacity - White |
| 8 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 9 | 15 mm nominal bore |
| 10 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 11 | 15 mm nominal bore |
| 12 | Providing and fixing PTMT pillar cock of approved quality and colour. |
| 13 | 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms |
| 14 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 15 | 15 mm nominal bore with 45 cm length |
| 16 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 17 | White solid plastic seat with lid |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 19 | 20 mm nominal outer dia Pipes |
| 20 | ProvidingandfixingUPVCsoil,waste,rainwaterandventpipesincludingallrequisitefittings,jointingofpipes&fittingswithsolventcement,trenching,refilling&testingof joints complete as per direction of Engineer in charge |
| 21 | 110mm dia |
| 22 | ProvidingandfixingPVCtrapswith100mminletand100mmoutletofselfcleaningdesignwithscreweddownofhingedgratingwithorwithoutventarmcompletei/ccostof cutting and making good the walls and floors. |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 24 | Local best quality Uningthou wood |
| 25 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : |
| 26 | Local best quality Uningthou wood |
| 27 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 28 | Local best quality Tolhao wood. |
| 29 | 30 mm thick shutters |
| 30 | Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm |
| 31 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness |
| 32 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/sqm Please Enable Macros to View BoQ information |
