| 1 | NATIONAL INSTITUTE OF FASHION TECHNOLOGY-MUMBAI Name of the work: “Providing and fixing of doors shutter and fly proof wire gauge to windows at Academic Building 3 and Canteen of Girls Hostel at plot No.20 at NIFT, Kharghar, Navi Mumbai”. NAME OF THE COMPANY: Sr.No. Description Unit Qty Rate in Rs Total Amount in Rs 1. Providing and laying of up to 20 mm thick and 40 mm wide Slope for Handicap toilet flooring by white cement including cost of laboure, cost of materials etc., complete as per direction of Engineer In Charge. Rmt 1.5 0.0 0.0 2. Providing of 57mm thick asbestos free composite, 'TUFWUD' brand - 3 criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x30 mm with 30mm thick infill of ceramic fibre (density 128 Kilograms/CMT) vermiculite mix, 3mm thick Lead Sheet on one side faced & 3mm Fire retardant High Density Fibre board, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping with Vision Panel: 1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 mm inside the shutter on all sides with U- glazing. An additional insulated powder coated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. With clear fire resistant glass panes 11mm thick having minimum 120 minutes fire Description Sqm 14.0 0.0 0.0 3. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 35 mm thick Sqm 22.0 0.0 0.0 4. Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 7.0 0.0 0.0 5. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work Sqm 130.0 0.0 0.0 6. Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. Each 5.0 0.0 0.0 7. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 150 metres lead :Of area 3 sq. metres and below Each 35.0 0.0 0.0 8. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres Each 1.0 0.0 0.0 9. Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces Sqm 7.0 0.0 0.0 10. Providing and fixing SS sliding door bolts, ISI marked anodised with nuts and screws etc. complete as per direction of Engineer In Charge : up to 250mm/300x16 mm Each 2.0 0.0 0.0 11. Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase RMT 125.0 0.0 0.0 12. Making hole up to 80x80 mm and embedding uPVC pipes up to 50 mm diameter in masonry and up to 450 mm long and filling with cement mortar 1:3 (1 cement : 3 coarse sand) including disposal of malba, painting making good. RMT 50.0 0.0 0.0 13. Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and welding, and painting, nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides Sqm 128.8 0.0 0.0 14. Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red or as per approved colour Sqm 15.0 0.0 0.0 15. Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 4.0 0.0 0.0 16. Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 10.0 0.0 0.0 17. Providing and fixing RCC slab/RCC drain cover with 50 mm thick and 450mm width with M30 grade and as per manufacturer reinforcement steel and as per manufacturer specification Sqm 40.0 0.0 0.0 18. Cleaning of existing drain bottom, removing the sludge, waste materials and removed materials from the out of campus. Sqm 40.0 0.0 0.0 19. Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work Sqm 125.0 0.0 0.0 20. Opening the Existing tile joints by applying heavy duty tile cleaner acid, then brushing the joint and tile surface, then cleaning the tile surface by the jet pump if required then filling the tile joints by water proof material by means of grouting then cleaning the tile surface by the cotton making good including cost of all material laboure charges etc., complete as per direction of Engineer in charge. Sqm 260.0 0.0 0.0 21. Removing damaged / rusted portions of existing MS tower ladder including Strengthening of ladder with additional MS flat / angle supports with Providing and fixing 8 mm dia galvanized steel wire rope (ISI marked) 30 mtr including necessary accessories such as GI thimbles, U-clamps (minimum 3 per joint), eye bolts, turn buckle, anchoring arrangement etc., complete as required & repair of ladder cage (if provided) including replacement of damaged hoops and flats and providing & fixing of Heavy Duty 150MM Swivel Wheels High Temperature Mild Steel Industrial Wheel casters with required cutting, welding, grinding and finishing complete. Including required scaffolding / safety arrangements for working at height. Level testing is required after repairing. Including labour charges transportation, loading/unloading etc complete as per direction of engineer in charge. WOrk should be carry out through professional ladder service provider Job 1.0 0.0 0.0 22. Removing of existing damage uPVC Gutter Pipe & Providing and fixing uPVC semi-circular roof water pipe of 180 mm diameter of approved make and colour, conforming to relevant IS standards, including necessary fittings such as brackets, clamps, couplers, bends, offsets, stop ends, running outlets, union clips, screws, nuts and bolts etc., fixed to fascia board/wall with suitable MS/GI brackets at required spacing; including cutting, jointing with solvent cement/rubber gasket, proper alignment, testing for leakages and making good the damaged portion of wall/structure complete as required. Include cost of all materials, labour, tools & tackles, scaffolding (if required), transportation, loading/unloading and all incidental charges etc complete as per direction of engineer in charge. RMT 18.0 0.0 0.0 23. Repairing of existing 6 mm thick polycarbonate sheet roofing including removal of damaged/cracked portions, careful dismantling of affected sheet panels, providing and fixing replacement 6 mm thick UV stabilized polycarbonate sheet of approved quality & brand matching profile, colour and make; refixing with suitable self-drilling screws, EPDM washers having 16 mm diameter & 3mm thick. aluminium/GI end closer C Channel & 75 mm long self-taping screw being drilled through the centre leg of the nuts bottom section without any puncturing o the polycarbonate sheet rubber gaskets and approved weatherproof silicone sealant; including cutting to required size, proper alignment, sealing of joints to ensure water tightness and making good complete as required. Include cost of all materials (for replacement portion), labour, tools & tackles, scaffolding (if required), transportation, loading/unloading and all incidental charges etc complete as per direction of engineer in charge. Sqm 25.0 0.0 0.0 24. Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of ACP sheet and fixed to the building structure . The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. Sqm 17.0 0.0 0.0 25. Providing, fabricating, supplying, transporting, and installing a Security Cabin of size 4'-0\\" × 4'-0\\" (approx.), comprising MS structural frame made from suitable square/rectangular hollow sections, external cladding with pre-painted GI sheet, internal wall lining with 6 mm plywood/board, roof with GI sheet and insulation, flooring with 19 mm thick Marine Plywood over MS frame, complete with one lockable door, sliding/fixed glazed windows on all sides as required, electrical wiring, LED light, fan point, weatherproof paint finish, and all necessary hardware, fittings, fasteners, labour, tools, and tackles. The cabin shall be mounted on an MS platform of suitable size and height fabricated from MS sections with anti-corrosive paint, complete in all respects as directed by the Engineer-in-Charge.1 ) TOP FRAME 50mm x 50mm MS Square Pipe 2mm Thick 2) TOPSTIFFENER 40mm x 20mm MS Rectangular Pipe 2mm Thick 3) BOTTOM FRAME 100mm x 50mm Specially formed M S \\"I\\" Beam 5mm Thick 4) Horizontal Cross Member 50mm x 50mm Specially formed M S \\"I\\" Beam 5mm Thick 5) Vertical Cross Member 50mm x 50mm Specially Formed M.S Square Pipe 2mm Thick 6) Bottom Frame Coating Bottom Frame should be painted with Black Japan kind of material. 7) SIDEPOST (Colum) 65mm x 65mm MS Square Pipe 3mm Thick 8) SIDE WALLSTIFFENER Specially Fabricated Corrugated Sheet 1.2mm/ Post Section-18 SWG 9) PANELLING OUTSIDE Specially G.I. Sheet-1.mm Thick (JSW, Uttam, Asian, Essar, TATA) 10) ROOF OUT SIDE Specially G. I Sheet -1.mm Thick properly Sloped & Water Tight (JSW, Uttam, Asian, Essar, TATA) 11) INTERNAL WALL PANELLING 8mm Thick MDF OSL Plyboard Plain White & Hi lane pin. 12) FALSECEILING 8mm Thick MDF OSL Plyboard Plain White 13) BOTTOM FLOORING 19mm marine ply wood and Vinyl Flooring 1.6 mm 14) ALUMINIUM WINDOWS Double Shutter sliding Aluminum Powder Coated Windows 2 to 3 Nos. Tinted Glass With Safety Grills. Rain Water Protection Guard. Size 3'(w) x 3'(H), 15) DOOR Corrugated In 1.2mm GI Corrugated Sheet, Glass wool, handling & Bulkhead 16) INSULATION Glass Wool Density of 32 kg/cu.m, Side Wall - 25mm, Ceiling -25mm 17) WIRING All Wiring Shall Be Concealed Type & Shall Be of PVC Insulated Guard Copper wire (PolyCab) 18) ELECTRICAL MATERIAL- All Electrical Fittings in The Portable Cabin Shall Be 220-240v, AC 50 Hz, And Switch Socket Light Point, Sockets 06 Amps socket with switch, inside and outside LED 18 watt bulb and 18 LED tube light fittings and 25 Amp MCB and Charging points and 600 mm wall fan and switch sockets extra 19)Earthing Point Shall Be Provide For SAFETY 20) OUTSIDE PAINTING Phosphate Then Cabin & Painting with One Coat of Synthetic Primer with Two Coat for Epoxy Paint. 21) HEAVY duty LEGS 6-inch height, four leg at all corners. 22) HOOK Specially Formed Hooks for Easy Lifting & Shift in and platform of size 2feet X 4feet and storage at top side size up to 4feet x 18inch x 18 inch and adequate drainage points shall be provided inside the cabin Nos 2.0 0.0 0.0 26. Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up tabove plinth level up to floor five level, including cost of centering, shuttering, finishing. 26.1 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 2.0 0.0 0.0 27. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 27.1 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 85.0 0.0 0.0 28. Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coat Sqm 100.0 0.0 0.0 29. Providing and fixing 04 Nos. Heavy Duty 150 mm dia Swivel Type High-Temperature Resistant Mild Steel Industrial Caster Wheels under the existing H-frame scaffolding, including cutting, drilling, welding, alignment, fastening with nuts, bolts, washers, and all necessary accessories for proper installation and smooth mobility of the scaffold. The item shall also include providing, fabricating, and fixing additional Mild Steel support bar/bracing at required locations in the H-frame scaffolding for strengthening and improving structural stability, including all materials, welding electrodes, labour, transportation, tools and tackles, finishing, and all incidental works complete as directed by the Engineer-in-Charge. Nos 2.0 0.0 0.0 TOTAL RS 0.0 रुपये (अंकों में) Signature with full name & Seal of the Bidder) |
