|
| 1 | Taking down existing chowkats or frames n.exc. 1.5 Sqm each without taking off shutters from the frames complete all as specified and directed. |
| 2 | Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as specified and directed. |
| 3 | Providing and fixing Factory made single rebate WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete in colour as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account. |
| 4 | Providing and fixing Factory made double rebate WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete in colour as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account. |
| 5 | Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 6 | S&F 35mm thick Glazed and skeleton shutters of 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified |
| 7 | Providing and fixing in repair factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured forpayment purpose.) |
| 8 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including 5.5mm thick glass and wiremesh complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 9 | S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 including screws complete all as specified and directed. |
| 10 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 11 | S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed. |
| 12 | S&F in repair for powder coated Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified and as directed. |
| 13 | Providing and fixing in repair stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC/aluminium windows, of approved quality, with necessary stainless steel screws etc. as directed A 200 x 19 x 1.9 mm complete all as specified and directed. |
| 14 | Supply only sheet glass, 4.8 mm ordinary quality and glazing with oil putty of any area complete all as specified and as directed |
| 15 | Supply only 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and as directed |
| 16 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 17 | Supply and fix in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 18 | Supply only HDF board, 12 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed. |
| 19 | S&F repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 20 | S & F in repairs Floor Door Stopper of size 70-100 mm of aluminium alloy body and tongue, anodised, with rubber cap complete all as specified and as directed. |
| 21 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 22 | M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.11 sqm but n.exc 0.18 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 23 | M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed |
| 24 | M&L for Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n.exc 0.42 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchine in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 25 | M&L for Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n.exc 0.42 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchine over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 26 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. complet all as specified and as directed. |
| 27 | M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 28 | M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10 mm thick rendering in CM 1:4 jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Dismantling boarding, any description, fixed in any position with nails as per specifications and drawing complete all as directed. |
| 30 | Providing and fixing in replacement of factory manufactured Hollow PVC wall panels of approved shade, 6 mm to 10 mm thick, 200–300 mm wide, and in lengths as required, having interlocking tongue-and-groove edges, fixed over a dry and smooth surface using recommended adhesive/mechanical fixings, complete with all necessary PVC edge trims, internal/external corner profiles, joint strips, and end caps. Panels shall be 100% waterproof, termite-proof, fire retardant (Class B1 or equivalent), and UV resistant (if exposed). Work to include surface preparation, cutting, fitting around openings, and final cleaning, including GI channel frame work over wall surfaces all complete as per manufacturer’s specifications and as directed by the Engineer-in-Charge. |
| 31 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 32 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed. |
| 33 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.. |
| 34 | M & L for rendering 15 mm thick In cement mortar 1.4 on concrete or brick masonry surfaces including mixing water proofing compound as par manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed by Engineer-in-charge.Note: Water proofing compound will be measured and paid separatoly |
| 35 | Supply only liquid water proofing compound as per the direction of Engineer-in-Charge. |
| 36 | M & L for rendering on concrete or block masonry surfaces or suriaces other than fair faces of brick surfaces, 15mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge |
| 37 | M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 38 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15488:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ® over new surlaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro Super Luxury Emulsion) |
| 39 | M&L preparing old putty/plastered surfaces of wall and applying one coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer and putty complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl), Shallmar (Superla Stay Clean) |
| 40 | M&L preparing old Putty/plastered surfaces of Ceiling and applying one coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer and putty complete all as specified and as directed by Engineer-in-charge.Meke: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl, Shalimar (Superla Stay Clean) |
| 41 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae elc and applying one coals of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1,67 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Westherpro+ Super Luxury Emulsion) |
| 42 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 sqm over over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 43 | M&L preparing old putty/plastered surfaces of wall by applying wire brush/patti and applying one coats of oil bound distemper including taking down nail, screws and filling with putty wherever required to match the existing surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 44 | M&L preparing old putty/plastered surfaces of ceiling by applying wire brush/patti and applying one coats of oil bound distemper including taking down nail, screws and filling with putty wherever required to match the existing surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 45 | M & L for preparation of old steel surfaces exc 10cm width and girth note othe wise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 46 | M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 47 | Dismantling boarding, any description, fixed in any position with nails as per specifications and drawing complete all as directed. |
| 48 | S&F for aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 10m thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of G.I frame work as per specification and drawing complete all as specified and directed. |
| 50 | S & F in repair for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board with both side plain of approved design pasted with hot melt adhsive for cup boards, work stations and bath room /kitchen cabinet etc of required sizes comprising of virgin polymer of K value 58-60 (Suspension grade) calcium carbonate and natural fibres (wood powder /rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having mimimum density of 650 kg/cum and screws withdrawal strength of 1800 N (Face ) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of /Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and edge taping with maskin tape to match edge decorative including fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S S screws, or auto hinges, stainless steel decorative handle, magnetic catcher as required, etc complete all as specified and as directed. Make : Rajashri/Maica/black cobra |
| 51 | Providing and fixing in repair for soft-close telescopic drawer channels, 3-fold, made from highquality cold-rolled steel (CRS), with built-in hydraulic soft-close mechanism, size 16\\", 18\\", for modular furniture/drawers. Channels to be installed with screws, ensuring full extension and smooth silent operation, complete in all respects as per manufacturer’s specification and direction of Engineer-in-chargeMake :- Hettich / Hafele / Ebco / Blum / equivalent |
| 52 | Providing and fixing in repair auto-closing soft-close concealed hinges (hydraulic type), 0 / 8 / 15 / 30-degree opening angle as required, made from high-quality nickel-plated steel or stainless steel, suitable for 16 mm or 18 mm thick shutters. Hinges shall be clip-on type with integrated soft-close mechanism for noise-free and controlled closing. Includes mounting plates, cover caps, screws, and all necessary fittings. Hinges to be of approved make (e.g., Hettich, Hafele, Ebco, or equivalent), installed as per manufacturer’s instructions and directions of the Engineer-in-Charge. |
| 53 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 54 | S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets all as specified and directed. |
| 55 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 56 | Supply and fixing in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed. |
| 57 | S & F in repair bevelled edge 6mm thick mirror of selected quality glass fixed with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 58 | S&F in repairs, 15mm CP 2 Way Bib Cock decorative heavy duty quarter turn all as specified and directedMake : Prayag/Parryware/Jaquar/Shakti |
| 59 | S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed. |
| 60 | S & F 32 mm (Dia of discharge pipe) Waste coupling of CP (half or full threaded) complete all as specified and as directed. |
| 61 | S&F in repairs PVC flexible heavy duty reinforced without corrugation waste pipe of 32 /40 mm for wash hand basin and Kitchen sink complete all as specified and as directed. |
| 62 | S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type heavy duty quarter turn and fixed etc complete all as specified and as directed.Make : Prayag/Parryware/Jaquar/Shakti |
| 63 | S&F in repairs stop valves/angle valve cast copper alloy chromium plated heavy duty quarter turn with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing etc complete all as specified and as directed. Make : Prayag/Parryware/Jaquar/Shakti |
| 64 | S&F brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and directed. |
| 65 | S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type heavy duty quarter turn 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.Make : Prayag/Parryware/Jaquar/Shakti |
| 66 | S&F in repair 25mm stainless steel 304 grade with wall thickness 2.87 mm chromium plated best quality curtain rails with brackets in both ends complete all as specified and as directed. |
| 67 | S&F in repairs stainless steel plate rack 910mmx960mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 kg complete all as specified and as directed |
| 68 | S&F in repair Sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers, waste pipe and coupling includind bedding in cement mortar, two coat iron fixing bracket of required size and connecting union to pipe over all size 1040mm x 510mm bowl size 510mm x 405 mm x 203mm, complete all as specified and as directed. |
| 69 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 70 | M & L for Sheet glass, 5.00 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including necessary wooden beading for wooden door or window or aluminium beading rubber gasket for aluminium door window complet all as specified and as directed. Please Enable Macros to View BoQ information |
