|
| 1 | Supply and fixing in replacement LED Bldg security light fitting LED 45 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed. |
| 2 | Supply and fixing in replacement LED Bldg security light fitting LED 25 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed. |
| 3 | S&F in replacement of LED flood light 100 Watts with aluminium die cast IP 66 with symmetric light distribution energy saving, environmental friendly suitable for high lighting archtechural faced complete all as specified and directed. |
| 4 | S&F in replacement of LED flood light 70 Watts with aluminium die cast IP 66 with symmetric light distribution energy saving, environmental friendly suitable for high lighting archtechural faced complete. |
| 5 | Supply and fix in replacement cast aluminium heavy pole designer leg and border designer base finished with polyurethane paint (with prior treatments) diamtr of one leg is approx 76mm outer dia for spiogot entry 60mm 03 Nos \\"T\\" shaped bolts with nuts and washers provided for concrete foundation , total length of the pole incl base and legs (base x 03 Nos legs) is 2463 MM (Appx 8 fit 1 inch ) with fully cast aluminium finish polurethane paint( with prior tretments) suare junction with max projection breadth of 625 mm suitable for two number post top lantren with polyurethane ( with prior treatments ) Paint with arylic window cover total length 533 mm and breadth 228 mm.B-22 brass provided with qaluminium cover incl PCC 1:2:3 (size 600 x 600 x 600 mm ) foundation, , nut bolts, connecting up complete all as specified and directed. |
| 6 | Supply and fix in replacement LED city cube bollard light fittings 09 Watt, robusty designed IP 65/IK 10 bollard and and is easy to install with base plate incl PCC 1:2:3 (size 90 x 90 x 90 mm )incl connector block , nut bolts, connecting up complete all as specified and directed. |
| 7 | S&F in replacement master LED spot lighter, 7-12 watt in out door type warm white colour including holder and driver complete all as specified and directed. |
| 8 | S&F in replacement LED spot lighter ,8 watt out door type in warm white colour inground spike lights , made from cast aluminium housing , IP65/ IK 06 suitable foe garden /faced lighting complete all as specified and directed. |
| 9 | Supply and fix in replacement surface light 20 watt sleek surface pro rugged yet stylish metal surface mounted down lighter surface for different open ceiling application wide range of luman packes and CCTs make it suitable suitable for indoor applacation of high pressure die cast aluminium housing, polycarbonate cover etc complete all as specified and directed. |
| 10 | Supply and fix in replacement surface light 15 watt sleek surface pro rugged yet stylish metal surface mounted down lighter surface for different open ceiling application wide range of luman packes and CCTs make it suitable suitable for indoor applacation of high pressure die cast aluminium housing, polycarbonate cover etc complete all as specified and directed. |
| 11 | Supply and fix in replacement surface light 12 watt sleek surface pro rugged yet stylish metal surface mounted down lighter surface for different open ceiling application wide range of luman packes and CCTs make it suitable suitable for indoor applacation of high pressure die cast aluminium housing, polycarbonate cover etc complete all as specified and directed. |
| 12 | Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover etccomplete all as specified and directed. |
| 13 | Supply & fix in replacement LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. |
| 14 | S & F in replacement of LED post top lantern 35 Watts with symmetric light distribution energy saving, environmental friendly IP65 spun aluminium landscape luminiary with higher power LED as light source complete all as specified and directed. |
| 15 | S & F in replacement of LED post top lantern 25 Watts with symmetric light distribution energy saving, environmental friendly IP65 spun aluminium landscape luminiary with higher power LED as light source complete all as specified and directed. |
| 16 | S&F in replacement RGBW surface mounted Narrow/Medium beam Projector/ Floodlight luminaire suitable for outdoor applications of Facade Lighting with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminous flux range 1440-1510 Lm. Luminaire having DMX 512 control protocol capable of producing 16.7 million colour options. The luminaire should have options for various beam angles: 8⁰/15⁰/25⁰/35⁰/60⁰/30⁰x50⁰. Power MIN 100 Wattege at steady state full intensity. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed. |
| 17 | Supply and fix in replacement switch piano flush type, 06 Amp, single pole, one way, 230 volt complete all as specified and directed. |
| 18 | Supply and fix in replacement switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified and directed. |
| 19 | Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed. |
| 20 | Supply and fix in replacement LED 40/36 watt light pureline slim suspended 50mm suspended (hanging type) aluminium extruded linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient complete all as specified and directed. |
| 21 | Supply and fix in replacement ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified and directed. |
| 22 | Material and labour in replacement of sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified and directed. |
| 23 | Material and labour in replacement of sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified and directed. |
| 24 | Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 04 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed. |
| 25 | Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, \\"C\\" curve, 10 KA breaking capacity - 12 Nos. |
| 26 | Supply and fix in replacement of MCB, DP, AC, 240 volt of 40 Amp capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. |
| 27 | Supply and fix in replacement of MCB, DP, AC, 240 volt of 63 Amp capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. |
| 28 | Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. |
| 29 | Material and labour for replacement of earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. |
| 30 | Supply & fix LED in replacement Ceiling /surface mounted down lighter, 2'X2' , 36W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete. |
| 31 | S & F in replacement PVC casing n caping ISI marked of size 20mm |
| 32 | S & F in replacement PVC casing n caping ISI marked of size 25mm |
| 33 | S & F in replacement flexible LED strip uses high brightness yellow colour with electrinic driver all as specified and directed. |
| 34 | S & F in replacement decorative wall mounted bed side LED light fittings 09 Watt , brushed nikel finish fixture with opal glass diffuser suitable with 9 watt LED fitting energy saving complete all as specified and directed. |
| 35 | S&F in replacement service cable twin core flexible copper cable of size 2 core 6 square complete. |
| 36 | Supply and Fix of Solar integral AIO bldg security light with Single Piece high pressure die-cast (LM6 Alloy) Aluminium housing, reliable & robust construction with IP65 & IK08 protection, suitable for OD 50/60mm bracket, having Min 3000 system lumens, suitable for 24hrs (2 Nights) Autonomy. The luminaire should work on Hybrid mode with priority for solar, in case solar charging is not availablethen it should automatically switch to AC grid supply for reliable operation. Lithium Pherrophosphate Battery capacity min [email protected] or 256Wh & Battery Temp range -20- +60℃. Panel capacity min 60Wp, CRI >=70, System Efficacy >180lm/W, & system wattage should not be more than 18W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percent to maintain equal autonomy of the system. The fixture should have designed for street light application & should have flexible angle of mounting from 0-15 Degree for divers geographical condition. Life class of LED System 50000hrs@L70 charger efficiency >90% .The PV module should be made up of crystalline silicon solar cells \\"Mono-Crystalline\\" and must have acertificate of testing ,Operating temp 0 Degree C to 50 Degree C, certifying above given parameters all reports shall be from In-house NABL complete all as specified and directed. Please Enable Macros to View BoQ information |
