|
| 1 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 2 | - Ditto - all as per item No 1 here-in-before but not exc 1.5 sqm each |
| 3 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. |
| 4 | Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed. |
| 5 | Providing and fixing factory made uPVC white colour Sliding window Three track area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and All joint should be filled with sealant.) |
| 6 | S&F powder coated Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified.NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately. |
| 7 | Providing and fixing stainless steel (SS-304 grade) friction hinges of size 250 x 19 x 1.9 mm to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. complete all as directed. |
| 8 | S&F of 5 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 9 | S&F of 5.50 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65X100 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete as per direction of Engineer-in-Charge. Note:- All joint should be filled with sealant. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65X125 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete as per direction of Engineer-in-Charge. Note:- All joint should be filled with sealant. |
| 12 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Note:- All joint should be filled with sealant. |
| 13 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 14 | M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed. |
| 15 | M&L for 35mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed. |
| 16 | S&F in replacement Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc.,, complete all as specified and directed. |
| 17 | S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc., complete all as specified and as directed. |
| 18 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed. |
| 19 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 20 | S&F for 100 mm long and 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete all as specified and directed. |
| 21 | S&F for 150mm long bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc complete all as specified and directed. |
| 22 | S&F for 200mm long of stainless steel tower bolt of approved make, made from high-quality SS 304 grade stainless steel, with smooth finish and corrosion resistance, complete with necessary screws and fittings. The bolt shall be of standard size, suitable for doors/windows, including installation, alignment, and testing for proper operation, all complete as per specifications and direction of the Engineer-in-Charge. |
| 23 | S&F for 140mm stainless steel stopper and Tongue anodized with hard drawn steel spring fixed in floor with necessary screws etc. Single rubber stopper complete all as specified and directed. |
| 24 | S&F for 300 mm long and 16 mm dia rod Matt finished stainless steel sliding doors bolts (ALDROP),with s.s nuts and screws etc. incl ISI Mark complete all as spd and directed |
| 25 | Providing and fixing magnetic catcher of approved make, consisting of ABS/plastic body with stainless steel plate and suitable magnet, fixed to cupboard shutters and frames, complete with counter plate, screws, and all necessary fittings. The work includes proper alignment, fixing, and testing for smooth and firm closing of shutters, all complete as per manufacturer’s specifications and direction of the Engineer-in-Charge. |
| 26 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant |
| 27 | S&F for 150 mm long Brass handles, cast type, polished bright etc., complete all as specified and as directed. |
| 28 | S&F for 100 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed. |
| 29 | S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed. |
| 30 | S & F in repair for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. |
| 31 | S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed by Engineer in charge |
| 32 | Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles to stores and rubbish off the premises etc., complete all as specified and as directed. |
| 33 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed. |
| 34 | -Ditto all as per item No 22 here-in-before but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed. |
| 35 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed. |
| 36 | M&L for glazed ceramic coloured/printed tiles 450x350x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed. |
| 37 | Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed. |
| 38 | S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed. |
| 39 | S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed. |
| 40 | S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed. |
| 41 | S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed. |
| 42 | S&F in repair 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 43 | S&F in repair 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 44 | S&F in repair 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed. |
| 45 | S&F in repair 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed. |
| 46 | S&F in repair PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed. |
| 47 | S&F in repair PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed. |
| 48 | S&F in repair PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed. |
| 49 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc., complete all as specified and as directed. |
| 50 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM(1:6) etc., complete all as specified and as directed. |
| 51 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 52 | Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work complete all as specified and directed. |
| 53 | M&L for RCC M-20 (Nominal Mix)(20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 54 | M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as spd and directed by engr in charge |
| 55 | Taking down steel tubing with and incl connections, of 20 mm dia bore, complete all specified and directed. |
| 56 | Taking down steel tubing with and incl connections, of 25 or 32 mm dia bore, complete all specified and directed. |
| 57 | Supplying and laying of CPVC PIPE OUTER DIAMETER of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 spl fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 58 | Supplying and laying of CPVC PIPE OUTER DIAMETER of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 spl fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 59 | S&F in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and incl 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 550 mm x 450 mm with approx bowl size of 500 mm x 375 mm x 200 mm etc, complete all as directed. |
| 60 | S&F in replacement of stainless steel kitchen plate rack made out of imm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and as directed. |
| 61 | S&F in replacement of swan neck pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, complete all specified and directed.Make: Jaquar, Prayag, Parry ware (super fine), |
| 62 | S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm fixed on MS brackets including 32 mm bore CP waste coupling and PVC connections 15mm size with PTMT nuts of length 600mm etc., complete all as specified and as directed. |
| 63 | S&F in replacement of Stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed.Make: Jaquar, Prayag, Parry ware (super fine), |
| 64 | S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make: Jaquar, Prayag, Parry ware (super fine), |
| 65 | S&F in replacement of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed.Make: Jaquar, Prayag, Parry ware (super fine) |
| 66 | S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed.Make: Jaquar, Prayag, Parry ware (super fine) |
| 67 | S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.Make: Jaquar, Prayag, Parry ware (super fine) |
| 68 | S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as directed. Make: Jaquar, Prayag, Parry ware (super fine) |
| 69 | S&F in repair SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. |
| 70 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 71 | S&F in repair corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 72 | S&F in repair Heavy Duty Flexible Braided PVC waste pipe for sink and wash basin 32mm dia with length not less than 1000mm i/c PVC waste fittings of Approved make etc., complete all as specified and as directed. |
| 73 | S&F in replacement of waste coupling, chromium plated (half or full threaded), 32/40 mm dia size, complete all as directed.Make: Jaquar, Prayag, Parry ware |
| 74 | S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. |
| 75 | S&F in replacement of plastic sheet with covers for water closet, of existing colour, closed pattern with flat bottom with chromium plated hinging device, complete all as directed. |
| 76 | S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. |
| 77 | S&F in replacement of 1st quality vitreous china ware European type WC with \\"P\\" or \\"S\\" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. |
| 78 | S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. |
| 79 | M&L for applying a layer of 1mm thick wall care putty on wall and making surface even and smooth etc., complete all as specified and as directed. |
| 80 | M&L preparing old putty/plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Arcylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-chargeMake : Asian Paints(Tractor Uno), Berger(Bison Emulsion), Nerolac(Beauty smooth), Shalimar (No. 1 Silk). |
| 81 | MaL preparing old Putty/plastered surfaces of Ceiling and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Arcylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make : Asian Paints(Tractor Uno), Berger(Bison Emulsion), Nerolac(Beauty smooth), Shalimar (No. 1 Silk). |
| 82 | M&L for preparation of old painted wooden surface and applying one coats of synthetic enamel paint of any description exc 10 cm width or girth, etc., complete all as specified and as directed. |
| 83 | M&L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coats of syanthetic enamel paint etc., complete all as specified and as directed. |
| 84 | S&F in repair flushing cistern kit of approved make, comprising PVC/HDPE concealed/exposed type cistern with dual flush mechanism (3/6/10 litres or as specified), including inlet valve, outlet/flush valve, float valve, flush pipe, connecting bolts, brackets, and all necessary accessories. Please Enable Macros to View BoQ information |
