|
| 1 | Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 2 | M&L 75mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base, complete all as specified and as directed by Engr-in-Charge. |
| 3 | Dismantaling of Stone slabs of any description or thickness, Laid dry or laid dry and pointed in any motor in floor,apron etc Complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L for chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L for sand cushning / Sand filling under floors (below paver blocks) including watering and consolidation, Complete all as specified and as directed by Engr-in-Charge. |
| 6 | S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickeness, M-35 Grade with grey cement and pigment, Complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and coloured pigment complete all as specified and directed.Note The tiles shall be produced by moulding rubberin a die/mouled and shall not consist of recycled rubber granules, crumb rubber or granule-based composite construction. |
| 8 | Fixing only Machine pressed precast Concrete interlocking paver block any shape and 60 mm thick with grey cement and pigment obtained from Item No.3 above complete all as specified and directed. |
| 9 | S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 80mm thickeness, M-40 Grade with grey cement and pigment, Complete all as specified and as directed by Engr-in-Charge. |
| 10 | Fixing only Machine pressed precast Concrete interlocking paver block any shape and 60 mm thick with grey cement and pigmentt obtained from Item No.3 above complete all as specified and directed |
| 11 | M&L for Filleting in any position and to any shape in cement mortar 1:4 exc. 25 but n exc. 50sq. cm and in repair, complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-Charge. |
| 13 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) as in Drain cover,manholes cover slab etc, complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for providing, precast cement concrete type B1 ,1:2:4 20mm aggregate in landing for cover slab (for drain etc).and setting in mortar complete with joints to match set in CM 1:4 even and smooth surface and drains Complete all as specified and as directed by Engr-in-Charge. |
| 15 | S & F for steel reinf TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 16 | M&L precast cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) block masonary with solid blocks exc 10 cm in with and setting in cement mortar 1:6, incl demolition of exiting Complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L for 15mm rendering on brick of concrete surface in CM 1:4 with finishing the surface even and smooth without using extra cement complete, all as specified & directed by Engineer-in-charge |
| 18 | M/L for rendering 10mm thick on in CM 1:6 using a fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all specified and as directed |
| 19 | M&L for preparation of newly plastered surface of wall including Chalk whiting, on plastered surfaces etc and applying two coat of white wash on walls, complete all as specifed and directed. |
| 20 | M&L for preparing new plastered surface of walls and applying two coats of cement based paint in camouflage pattern over a coat of alkali-resistant priming paint, complete all as specified.Note: The pattern of camouflage shall be approved by GE. Please Enable Macros to View BoQ information |
