|
| 1 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key etc., complete all as specified and as directed. |
| 2 | M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth etc., complete all as specified and as directed. |
| 3 | M&L for rendering 15mm thick plaster in CM (1:4) over a concrete or block masonry surfaces including mixing water proofing compound on top layer as per manufactures instructions (or 3% by weight of cement) and finishing the top surfaces even and fair etc., complete all as specified and as directed. (Note :Water proofing compound shall be measured and paid seperately under relevant item of this schedule as supply only). |
| 4 | M & L for making good under cills or over arches, lintels and bressummers including all pinningwhen necessary in cement mortar 1:6 complete all as specified and as directed. |
| 5 | Supply only Liquid water proofing compound ISI marked etc., complete all as specified and as directed. (Note : WPC may apply as per manufactures instructions or 3% by the wt of cement). |
| 6 | M&L preparing newly plastered surfaces of wall and Distempering with 1st quality acrylic distemper (ready mixed) two or more coats having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including of 3mm wall care putty thickness over plastered surface to prepare the surface even and smooth all as specified & directed. |
| 7 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apax Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 8 | Demolition of precast concrete work built in cement mortar including all quoins arches pillars etc., complete all as specified and as directed. |
| 9 | M&L for Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc.10 cm in width and setting in cement mortar 1:6, etc., complete all as specified and as directed. |
| 10 | M&L for precast cement concrete block masonry with solid Type C1 1:3:6 (20mm graded aggregate as per IS 383) of 10 cm in width and setting in CM 1:6 all as specified . |
| 11 | Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles to stores and rubbish off the premises etc., complete all as specified and as directed. |
| 12 | M&L for Double charged/ultracharged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed. |
| 13 | -Ditto all as per item No above but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed. |
| 14 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed. |
| 15 | M&L for glazed ceramic coloured/printed tiles 450x350x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed. |
| 16 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc., complete all as specified and as directed. |
| 17 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM(1:6) etc., complete all as specified and as directed. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 19 | Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each.(including Aluminium windows/ventilators etc) |
| 20 | Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each.(including Aluminium windows /ventilators etc) |
| 21 | S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) frames or shutters for doors, partiotions, windows and ventilators and similar works with one or more rebates including necessary joining cleats, glazing clips, ruber neoprene packing, handles Stainless steel adjustable friction stay hinges etc as required to fix aluminum frame and complete all as specifiedNote : (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth and decogrill etc(ii) Glass wire cloth and grill to be measured and paid seperatly |
| 22 | S & F only 4 mm Plain sheet glass ordinary quality, in square not exc 0.5 sqm each. |
| 23 | S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified. |
| 24 | S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down all as specified. |
| 25 | S & F only Figured glass 4 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. |
| 26 | S&F for Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 27 | M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc., complete all as specified and as directed.(on truss work & new pressed steel frame) |
| 28 | S&F in repairs for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant |
| 29 | S&F for 150 mm long Brass handles, cast type, polished bright etc., complete all as specified and as directed. |
| 30 | S&F for 100 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed. |
| 31 | S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed. |
| 32 | S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed etc., complete all as specified and as directed. |
| 33 | S&F in repairs 5 mm thick frameless Looking Mirror of size as per site requirement beveled edge incl NR itching and mirror button, complete all as specified and directed. |
| 34 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete as per direction of Engineer-in-Charge. Note:- All joint should be filled with sealant. |
| 35 | S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length etc., complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 36 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 37 | S&F 35 mm thick Glazed and skeleton shutters of 2nd class hard wood open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers including necessary fillets of 1st class hard wood , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified |
| 38 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed. |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 40 | S&F for 125 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 etc., complete all as specified and as directed. |
| 41 | S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed etc., complete all as specified and as directed. |
| 42 | S&F for 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc., complete all as specified and as directed. |
| 43 | S&F for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc., complete all as specified and as directed. |
| 44 | S&F for 150mm aluminium handles, cast type , anodised etc., complete all as specified and as directed. |
| 45 | S & F in repairs Floor Door Stopper of size 70-100 mm of aluminium alloy body and tongue, anodised, with rubber cap complete all as specified and as directed. |
| 46 | S & F in repair aluminium door seal for snake guard with brush complete all as specified and as directed. |
| 47 | S&F in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets etc., complete all as specified and as directed. |
| 48 | Taking down 20mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store etc., complete all as specified and as directed. |
| 49 | Taking down 25/32mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store etc., complete all as specified and as directed. |
| 50 | Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings (plain elbow, plain Tee, etc) on walls /ceilings or laying in floors etc., complete all as specified and as directed. |
| 51 | Supply and laying of CPVC pipes 25 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings (plain elbow, plain Tee, etc)on walls /ceilings or laying in floors complete all as specified. |
| 52 | M&L in repairs for PVC (SWR) floor traps 75mm bore with stainless steel grating (measured seperately) including jointing to waste pipe and in cement concrete 1:2:4 type B-1 etc., complete all as specified and as directed. |
| 53 | S&F in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc., complete all as specified and as directed. |
| 54 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc., complete all as spd and directed by Engineer-In-Charge.Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 55 | S&F in replacement of pillar mixer taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 56 | S&F in repairs 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type.Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 57 | S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and wall plugs (Minimum weight 90gms) etc., complete all as specified and as directed. |
| 58 | S&F in replacement of towel rack 600 mm long with lower hangers and bracket made of cast copper alloy, chromium plated, complete all as specified and directed. Make : Hindware/ Cera/ Parryware. |
| 59 | S&F in repair Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and as directed.Make: Jaquar, Prayag,Parry ware, Prima, Pearl |
| 60 | S&F in repair to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc., complete all as specified and as directed.Make: Jaquar,Prayag,Parry ware, Prima, Pearl |
| 61 | S&F in repair two way bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and as directed.Make: Jaquar, Prayag,Parry ware, Prima, Pearl |
| 62 | S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, all as specified. |
| 63 | S & F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 64 | S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe make complete all as specified and as directed. |
| 65 | Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supplyline and water closet pan complete. |
| 66 | S&F in repair 125 mm dia CP grating incl joints with solvent cement etc., complete all as specified and as directed. |
| 67 | Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) |
| 68 | Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA). |
| 69 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) |
| 70 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow |
| 71 | Supply and fixing 25mm outer dia CPVC pipes brass Elbow |
| 72 | Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) |
| 73 | Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) |
| 74 | Supply and fixing 20 mm outer dia CPVC Brass Tee |
| 75 | Supply and fixing 20 mm outer dia CPVC Brass union |
| 76 | Supply and fixing 25 mm outer dia CPVC Brass union |
| 77 | S&F in repair 25 mm cpvc ball valve screwed both ends for cpvc pipe complete all as specified and as directed.. |
| 78 | S&F in repair 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.. |
| 79 | S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.. |
| 80 | S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore. |
| 81 | S&F in reapir Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) |
| 82 | S&F for CPVC pipe outer diameter of 25mm Tank Adaptor as a connecting niple for water tank storage complete all as specified and directed |
| 83 | S&F in repair Bore dia of pipe in 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 84 | M&L for complete removal of old distempered surfaces and applying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete . |
| 85 | M&L for two coats of acrylic distemper of approved tint on wall surfaces |
| 86 | M & L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper all as specified and directed. |
| 87 | M & L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper all as specified and directed. |
| 88 | M&L for one subsequent coat of acrcylic distemper complete all as specified and as directed. |
| 89 | M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 90 | M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed. Please Enable Macros to View BoQ information |
