|
| 1 | M&L for prepration of existing black top/ unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @ 2.5Kg/10 Sqm by mechanical sprayer complete all as specified and directed by Engr-in-charge. |
| 2 | M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Grd) content by weight of total mix and rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge. Note : Repair of road to be carried out in Patches. |
| 3 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and n exc 50 mm deep complete all as directed and applying evenly a priming tack coat of bitumen VG-10 grade @ 5.0Kg/10 Sqm by mechanical sprayer complete all as specified and directed by Engr-in-charge. |
| 4 | M&L for premix bituminous, macadam with 4.00% binder content (paving bitumen VG-30) by weight of total mix by hot mix process laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm or less complete all as specified and directed by Engr-in-charge. |
| 5 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. (Make-CMS Bombay/Shivalik/Prime-Chandigarh/Ritacto-Meerut/SN Industries-Delhi). |
| 6 | Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. Make : Dark Eye/Cat Eye/3M |
| 7 | S & F in repairs, Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.30 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Make : Dark Eye/Cat Eye/3M |
| 8 | S & F in repairs, metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and directed. NOTE : Dealineator to be of Solar type or as directed by Eng-in-charge. Make : Dark Eye/Cat Eye/3M |
| 9 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 10 | M&L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing. |
| 11 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in hard standing complete all as specified & directed by Engineer-in-charge. |
| 12 | M&L for even spreading of 25 mm thick layer of sand cushioning all as specified & directed by Eng-in- Charge. |
| 13 | M&L for 60mm thick Rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement. |
| 14 | M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15 mm thick (Square / Rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete including dismantling of existing tiles in floors all as specified and directed by engineer-in-charge. |
| 15 | M & L for glazed / matt finish chequred cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) after and including 20mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. |
| 16 | M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete. |
| 17 | Demolition of brick work /stone masonry built in cement mortar incl coping of any description all as specified and directed. |
| 18 | Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed. |
| 19 | M & L for rendring 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge. |
| 21 | Dismantling wrought iron or mild steel work of any description specifically provided for framed works as in gratings, railings, etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 23 | S & F MS plate (CHEQUERED) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150 mm handle complete all as specified and directed. |
| 24 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for preparation of new Surfaces of Brick, Stone, concrete, asbestos and plaster surfaces over 10cm girth or width, not otherwise described of any description and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for preparation of old Surfaces of Brick, Stone, concrete, asbestos and plaster surfaces over 10cm girth or width, not otherwise described of any description and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
