Tender For Special Repair Building No. P-13B At Lv (S) Under Ge Dehu Road
Tender Value
1.08 Crore
Estimated cost
Bid Submission
11 Jul 2026
0 days left
EMD
1.83 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Building No. P-13B At Lv (S) Under Ge Dehu Road
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed. |
| 2 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.specifically provided for complete all as specified and directed. |
| 3 | M & L for providing 25 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone aggregates ) as in filling in levelling course on roof slab complete all as specified and directed. |
| 4 | Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed. |
| 5 | Supply only Liquid water proofing compound . |
| 6 | M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :-(a) Apply one coat of oil bituminous primer @ 1.20 kg/Sqm over concrete surface.(b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.0 kg per Sqm by torch applicaton method.(c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.(e) The make / treatment shall be from the one of the following manufacturer:-(i) 'Moply FP' of M/s Texsa (I) Pvt Ltd.(ii) 'Hyperplast' pf IWL India Ltd.(iii) 'Super thermpay' manufactured by M/s Shalimar tar product(iv) 'Hydroflame' of M/s Hydrotech Ltd. |
| 7 | Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed. |
| 8 | S & F rotational moulded polyethylene triple layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 9 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm bore of pipe complete all as specified and as directed. |
| 10 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 20 mm bore of pipe complete all as specified and as directed. |
| 11 | M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 12 | M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 13 | S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed. |
| 14 | S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed. |
| 15 | S&F in repairs 15 mm dia bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed. |
| 16 | S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 17 | S&F in repairs Grating doom 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed. |
| 18 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 19 | S& F in repairs Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches with 32mm dia bore of pipe complete all as directed. |
| 20 | S& F in repairs stainless steel Sinks for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling of 40mm dia of discharge pipe complete all as specified and as directed. |
| 21 | S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 22 | S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe of poluethylene of low or high density or PVC 32mm dia jointed to WC and handle incl brackets all as directed. |
| 23 | S&F in repairs Vitreous china wash down water closet EWC pedastal pattern white/ ivory/off white (excluding flushing cistern & flush pipe) including plastic water closet seat cover closed pattern with flat bottom and cover and MS CP hinging device complete in all respect all as specified. |
| 24 | S & F in repairs 600xmmx450mm mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 25 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm dia pipes all as specified and directed by Engineer-in-Charge. |
| 26 | S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F,110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F, 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as speicfied and directed. |
| 30 | M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. |
| 31 | M&L for vitrified coloured tiles 8 to 10mm thick Light shade (square/rectangular) polished area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed. |
| 32 | All as per item No 31 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed. |
| 33 | M & L Glazed ceramic colour tiles in vertical surface 450mm x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced. |
| 34 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed. |
| 35 | M&L prepolished machine cut Kota stone 20 to 25mm thick in riser of steps, skirting, dado and pillar using Kota Stone of size 1200x250mm with tolerance of 10mm in length and width size set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 15 mm thick screed bed or bedding layer of cement 1:6 including front nose moulding & two groove along the length of treads complete all as specified and as directed by Engineer-in-Charge |
| 36 | All as per Srl Item No 35 above but in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 complete all as specified and as directed. |
| 37 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including screed bed or bedding layer of mortar 15mm thk in CM 1:6 complete all as specified. |
| 38 | M&L for providing edge to moulding to 18-20mm thick marble stone any description including machine polishing to edge to give high gloss finish ect complete all as specified and as directed by Engineer-in-Charge |
| 39 | Taking down plaster from chajja/facia etc including dismantling of damaged concrete and repair the same with 75 mm thk concrete 1:1.5:3 type A0 on chajja including necessary form work, applying 10mm thick plaster in CM 1:3 mixed with WPC @3% by weight of cement (WPC shall be measured and paid for separately) and applying two coat of cement base paint with primer to match the existing,finished even and smooth using extra cement with out extra cost all as specified and directed. |
| 40 | Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 41 | M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed. |
| 42 | M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 43 | M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment over 25 mm thick sand cushion complete all as specified and as directed. |
| 44 | Taking down chowkhats or frames with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each. |
| 45 | All as item No 44 above but n.exc. 1.50 sqm each |
| 46 | Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each |
| 47 | Taking down steel window/ventiltors of any size |
| 48 | Cutting holes in brick walls exc half brick but n exc one brick, built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required -depth of embedded portion of holdfast or lugsmeasured from the face of jamb into the wall - exc. halfbrick but n exc. one brick. |
| 49 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates, rat rail/helical spring of size 125 X 60mm |
| 50 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm |
| 51 | M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed. |
| 52 | S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood. |
| 53 | S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, including mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. Please Enable Macros to View BoQ information |
| 54 | S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, including mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender