|
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed. |
| 2 | Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:4), complete all as specified and directed. |
| 3 | Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:4), (except bricks, old bricks retrived from item No 1 shall be used) complete all as specified and directed. |
| 4 | Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed complete all as specified and directed |
| 5 | Material and Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | Excavation in trenches in soft/loose soil , n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 7 | Demolition of cement concrete any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 9 | Material and Labour providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 10 | Material and Labour for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate as in columns pillars, piers, posts and struts and the like complete all as specified and directed. |
| 11 | Supply and Fix mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 12 | Supply and Fix mild steel TMT bars 5mm dia and over upto and incl 10 mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for in stirrups, spaces and binders and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 13 | Material and labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc., flat fair finished concrete surfaces, complete all as specified and directed. |
| 14 | Dismantling galvanised 2 stranded steel Barbed wire complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 16 | Supply and Fix Mild Steel angle iron or other flat or round sections required as in horn in fencing/grills including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc; and similar work conforming to Fe-290 Gde E-165 complete all as directed and specified. |
| 17 | Supply and Fix Galvanised two strands, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and directed. Note: Each line of wire to be measured |
| 18 | Fixing only and restraining, resecuring incl making good staples etc, (Galvanised two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing) to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed. Note: Each line of wire to be measured. Old wire retreved from dismanling. |
| 19 | Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed. |
| 20 | Material and Labour for preparation of New steel or iron surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 21 | Material and Labour for preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 22 | Material and labour, 15mm thick cement plaster in CM (1:4) mixed with liquid WPC as per manufacturer’s instructions on the surface of brick work/concrete surfaces of walls, facia of roof projection etc finished even and fair without using extra cement complete all as specified and directed. |
| 23 | Material and Labour for preparation of newly plastered surfaces, and applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls complete all as specified and as directed |
| 24 | Material and Labour for preparation newly plastered surfaces & M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 25 | Supply and Fix Barbed razor type concertain coil fixed on existing angle post and barbed wire over security wall and dia of coil 900mm min weight per coil is 12.80 kg ,hot dip galvanised and binding with and including MS annelled wire of 0.60 mm fixed in repair ,complete all as specified and directed. |
| 26 | Fixing only Barbed razor type concertain coil fixed on existing angle post and barbed wire over security wall and dia of coil n.exc 900mm and binding with and including MS annelled wire of 0.60 mm fixed in repair ,complete all as specified and directed. |
| 27 | Material and Labour for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any soft/loose soil complete all as specified and directed. |
| 28 | Material and Labour for hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and leveled in layer n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 29 | Material and Labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains complete all as specified and directed. |
| 30 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each as in soft/loose soil, complete all as specified and directed. |
| 31 | Removing excavated material (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 32 | Note: The total amount shall subject to adjustment of credit of Rs 30626.43 for old Materials as per Schedule of Credit Please Enable Macros to View BoQ information |
