Tender For special Repair To Bldg No T-10 Of 1/357 Int, Fs Unit & T-11 Of 1 Fit Units At Poonch In Aor Of B/R-Ii Undder Ge 881 Ews.
Tender Value
39.40 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
78800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-10 Of 1/357 Int, Fs Unit & T-11 Of 1 Fit Units At Poonch In Aor Of B/R-Ii Undder Ge 881 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: Spl Repair to Bldg No T-10 of 1/357 Int, FS unit & T-11 of 1 FIT Units at Poonch in AOR of B/R-II Undder GE 881 EWS. Contract No: GE/PNH-33/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION:Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) as in ground floors and paving not exceeding 15cm thickness below or above ground level complete all as specified and directed. |
| 5 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 6 | 18-20mm thick Machine cut Kota stone slab flooring, bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, grinding and mirror polishing complete, all as specified and directed. |
| 7 | Machine cut pre polished Kota stone 16-18 mm thick as in riser of steps, skirting, dado and pillar fixed over & including cement plaster 10 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the kota stone including rubbing and polishing, complete all as specified and directed. |
| 8 | Rubbing and polishing of existing kota stone flooring to match with new flooring all as specified and directed. |
| 9 | 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub floor,finished the surface even & fair complete all as specified and directed. |
| 10 | 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 12 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats,cutting,welding & necessary fittings such as nut bolt,plate etc. conforming to Fe 410W(Gde E-250), quality 'A' complete all as specified and directed. |
| 13 | All as per item No-11 above but except steel (mild steel obtained from dismantling) complete all as specified and directed. |
| 14 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 15 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 16 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 17 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 18 | Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm with hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and providing 4mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and as directed. |
| 19 | 16-18mm thick Granite (of any type) as in floor/ platforms/ counters etc. machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over screed bed in CM 1:4 and including grinding, polishing, rounding of edges complete all as specified and directed. |
| 20 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking out joints etc as in patches complete all as specified and directed. |
| 21 | Rendering 15mm thick on fair faces of brick wall surfaces in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 22 | Rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick work mixed with liquid water proofing compound as per manufacturer instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note: Supply only WPC shall be measured and paid for separately. |
| 23 | Preparation of newly plastered or unplastered surface of wall and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed. |
| 24 | Preparation of old plastered or unplastered wall surfaces including washing,scrubbing down and stopping of distermperd surfaces and applying one coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and directed. complete all as specified and directed. |
| 25 | Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 26 | Applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over old surfaces on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 27 | Applying wall care putty of approved make not less than 1mm thick on walls as per manufacturar instructions with and including rubbing by means of sand / abrasive paper to have smooth finishing to receive primer / paint, complete all as specified. |
| 28 | 75mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection/ path, finished the surfaces even & fair, joints filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each, complete all as specified and directed. |
| 30 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each, complete all as specified and directed. |
| 31 | 30 mm thick Flush shutters, solid core, construction, with block board core and plywood face panels, commercial type on both sides with particle board core all as specified and directed. |
| 32 | 30mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc divided into square (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete, all as specified and directed. |
| 33 | All as per item No-31 above but without sash bar as in window/ventilators as specified in SSR Part-I, Section 8, clause 8.24 (b). complete all as specified and directed. |
| 34 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 35 | 300mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 36 | Mild steel pressed handle, oval type stove enamelled black of size of 150mm, complete all as specified and directed. |
| 37 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 38 | Mild steel butt hinges, medium weight, cold rolled,100mm long fixed, complete all as specified and directed. |
| 39 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 40 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 41 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 42 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 43 | Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and as directed. |
| 44 | Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 45 | Applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10cm width or girth, complete all as specified and directed. |
| 46 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 47 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), all as specified and directed. |
| 48 | Walling of random rubble stone masonry uncoursed , well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified. |
| 49 | All as per item no:47 above but except stone. |
| 50 | 500 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 51 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 52 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm dia bore fixed in repair, complete all as specified and directed. |
| 53 | Steel water tubing of 15 mm dia bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 54 | Stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm fixed in repairs, complete all as specified and directed. |
| 55 | 15mm brass chromium plated mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified and directed. |
| 56 | Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified and directed. |
| 57 | Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work/metal frame work complete all as specified and directed. |
| 58 | Magnetic Catcher For cupboard (size 52x30mm), complete all as specified and directed. |
| 59 | Continuous (piano) hinges 30 mm width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 60 | 100mm thick PCC 1:2:4 (using 20mm graded aggregate) type B-1, Nominal mix as in hard standing / paved surfaces laid as in alternate bays including forming and filling with filller joint, complete all as specified and directed. |
| 61 | Coloured exterior heavy duty Endura tiles with chemical resistant coating of size 400mmx400mmmmx10mm thick as in floor/path, set, jointed and pointed in neat cement slurry, laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 62 | Vitrified Ceramic tiles 8 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6,complete all as specified and as directed by Engr-in-Charge |
| 63 | Vitrified Ceramic tiles 8 mm thick area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 64 | 5-6mm thick hollow insulated PVC coloured wall panelling include lining and necessary cleats, screws, bedding etc.complete fixed to wall in repair include dismantling of wall panelling. Complete all as specified and directed. |
| 65 | 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 66 | Hard core of broken stone/boulders of gauge n exc 63mm deposited spreed and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified and directed. |
| 67 | 100mm thick PCC 1:3:6 type B-2 (using 40mm graded crushed stone aggregate) as in path, road, hardstanding etc, laid in alternate bays (not exceeding 2 sqm each) finished the surface even & fair,joints filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 68 | Finishing the concrete surface by brooming complete all as specified and directed. |
| 69 | Forming contraction (Dummy) joints 65 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed. |
| 70 | E/M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring with casing caping (light, fan, socket or power complete) including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 71 | Point wiring with 2 x 1.5 sqmm (as phase and neutral) and 1 x 1.5 sqmm (as earth continuity conductor) multistranded copper conductor cable connected to common earth dolly,1100 volts grade , FRLS, PVC insulated and including PVC casing caping of suitable size with accessories and PVC boards of appropriate sizes and all requisite accessories complete for the followings:- |
| 72 | One light/fan point (Ceiling and Exhaust) controlled by one switch complete all as specified and directed. |
| 73 | One 5 Pin switch socket combination 6 Amp on same board complete all as specified and directed |
| 74 | One 5 Pin switch socket combination 6 Amp on independent board complete all as specified and directed. |
| 75 | All as per item No.70 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 16/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 76 | Ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed. |
| 77 | Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. |
| 78 | Socket outlet 2 in 1,5 pin, 6 Amp flush type universal, complete all as specifed and directed. |
| 79 | Switch socket multipurpose combination 2 in 1, 2 pin & 3 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 80 | Switch socket multipurpose combination 2 in 1, 5 pin,16 Amp flush type universal,complete all as specifed and directed. |
| 81 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 82 | Inverter LED Lamp, CDL,12 watt, B22 base all as specified and as directed. |
| 83 | Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed. |
| 84 | LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified directed. |
| 85 | S&F in repair building security light fittings, 35 watt LED,230v, AC out door type pre-wired, IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 86 | S&F in repair ceiling mounting LED light fittings luminaire 600mmx600mm, 35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and as directed. |
| 87 | Submain wiring with two single core 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade and one single core 2.5 Sqmm as earth continuity conductor drawn in and including PVC casing caping of suitable size with accessories complete all as specified and directed. NOTE: (i) Two run of 4 Sqmm and one run of 2.5 Sqmm copper cable including casing caping shall be measured as one unit. |
| 88 | Supply and Fixing in repair SPN DB sheet metal enclosure double door (IP-43), 12 Ways, with neutal link complete suitable for 240 Volts, AC,50 Hz complete all as specified and as directed. |
| 89 | MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. |
| 90 | MCBs, SP,240 volts, breaking capacity 10 KA, rating 6 to 40 amps, complete all as specified and as directed. |
| 91 | Taking out old unsercieable ceiling fan from site of capacity 1200/1400mm sweep and supply and fixing of new BLDC ceiling fan 1200mm sweep,230 V, 50 Hz including all connecting accessories, complete all as directed by Engr-in-charge. |
| 92 | Taking out old unserviceable exhaust fan from site and supply and fixing of new exhaust fan made of sturdy enggineering plastic complete with louvers shutter, voltage 230V,50 Hz, RPM 1200, Copper winding of sweep 300mm including all connecting accessories, complete all as directed by Engr |
| 93 | Takingdown the old unsv water heater/geyser of 25 Ltr incl supply and fix new electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 94 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 95 | Two Pole change over switch 63A, 240V Heavy Duty Sheet metal encloser box With Opreting Handle and complete all as specified and as directed. |
| 96 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as directed. |
| 97 | Twin core aluminium cable of size 16 sqmm 2 core 1100 volts grade heavy duty cable PVC insulated, served with inner sheateing of PVC sheated in service connection suspended by insulating hangers not more than 1 mtr apart incl taking down old u/s cable all as specified and all as directed by Engr-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender