|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat etc., removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge |
| 2 | Demolition of plain cement concrete of any description and in any position complete all as specified and directed. |
| 3 | M & L for 40 mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate as in bedding layer for laying & fixing floor as in levelling course complete all as specified and directed. |
| 4 | M&L for glossy finish vitrified ceramic Light shade tiles 10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm each, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer 20 mm thick in CM 1:4 for laying floor finishes, complete all as specified and directed by Engr-in-Charge |
| 5 | S&F of Glossy Finish Vitrified ceramic Light shade tiles 10mm thick (Square/ Rectangular) polished area of each tilenot exceeding 0.36 Sqm each, in skiting / dado, set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface etc complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for glazed ceramic coloured tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface etc complete all as specified and as directed by Engr-in-Charge. Note:- Desinger concept tiles has to be matched with exisitng tiles. |
| 7 | M&L coloured joint free Non Skid ceramic tiles light shade 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 20mm thick screed bed in cement mortar 1:6, complete all as specifed and directed by Engr-in-charge . |
| 8 | M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over 20mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile, complete all as specified and directed by Engr-in-Charge |
| 9 | M&L for pre-cast cement concrete type B1 (1:2:4), using 20 mm graded stone aggregate, as in block masonry with solid blocks, exc. 10 Cm in width and setting in CM 1:6 including demolition of old PCC block complete all as specified and diretced |
| 10 | M&L for pre-cast cement concrete type B1 (1:2:4), using 20 mm graded stone aggregate, as in block masonry with solid blocks, exc. 10 Cm in width and setting in CM 1:4 including demolition of old PCC block complete all as specified and diretced |
| 11 | M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of old stone masonary work, complete all as specified and directed |
| 12 | M&L Brick work with sub-class ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in Cement Mortar 1:6 including demolition of old brick Work complete all as specified and directed. |
| 13 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and directed by Engr-in-Charge |
| 14 | M&L for rendering 15mm thick on fair faces of brick / concrete surfaces in CM (1:4), finished even and smooth without using extra cement, mixed with complete all as specfified and directed.Note :- WPC shall be measured & paid separately under respective item. |
| 15 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 16 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 17 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement), complete all as specified and directed |
| 18 | M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed |
| 19 | M&L applying 1mm thick wall care putty on newly plastred surface and prepare the smooth surface with sand paper and applying two coats of oil bound distemper on walls/Ceiling complete all as specified and as directed by Engineer-in-Charge |
| 20 | M&L for Complete removal of existing treatment from old decorated plastered surfaces of walls/Ceiling by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1 mm thick (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed. |
| 21 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 22 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 23 | M & L for Granite 18 to 20mm thick on vertical surfaces such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including rendering 20 mm thick back coat in CM (1:4) complete all as specified and directed |
| 24 | M& L for Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed |
| 25 | S&F for aluminium door / window / ventilator / partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window/ doors including connected items,with and including making good to the disturbed portion with its original complete all as specified and directed |
| 26 | S&F 4mm thick sheet glass ordinary quality black glass colour, white,frosted or multicolour fixed in aluminium window / Door / Partition includin rubber beading in square area n. exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F 4mm thick sheet glass ordinary quality black glass colour, white, frosted or multicolour fixed in aluminium window/ Door/ Partition includin rubber beading in square area exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F of 12 mm thick Toughned glass as in patition, hinged doors, partitions automatic doorsand similar work including cutting to shape, drilling holes required complete all as specified and directed |
| 29 | Material and Labour 35mm thick factory made pre laminated flush door shutters, 2 mm finishes in hi-gloss and confirming to IS -2046 and solid core construction, with particle board core and plywood face panels, suitable for exterior & interior grade door, commercial type on both sides complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply and Fix SS finish 200mm long 6 lever locking mechanism gives high security with complete safety includinguding fitting 1 Nos Striker plate, 2 Nos Handle, 1 Nos Square shank, 2 Keys, screws as required complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 31 | Supply and Fix SS finish 200mm long 6 lever locking mechanism gives high security with complete safety includinguding fitting 1 Nos Striker plate, 2 Nos Handle, 1 Nos Square shank, 2 Keys, screws as required complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
