|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning,filling in and ramming earth or broken rubble mixed with earth, in layers n exc 25 cm in hard/dense soil,watering and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense of soil |
| 2 | Removal of excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5meter above the starting point complete all as specified and directed. |
| 3 | M&L Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as in foundation, fillings for posts and mass, concrete complete all as specified and directed. |
| 4 | S & F mild steel work in framed brackets of angle or tees, C Channels, I sections with web flanges cut to shape, drilled and countersunk of screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc, 10 kg each bracket, and hanging also fastening and fixing complete conforming to Gde Fe 290, Gde E-165 complete all as specified and directed. |
| 5 | S&F mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St 240 complete all as specified and directed. |
| 6 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 7 | S & F Pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws of any type of sheets in roof coverings complete all as specified & directed. |
| 8 | S&F for Plain, galvanised, mild steel sheeting of 0.8mm thickness, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 9 | S & F mild steel plate (plain or chequered) channels, square cut or notched (ordinary or counter sunk), forming holes with riveted, bolted or welded attachement etc. and hanging also fastening and fixing complete conforming to Gde Fe 410 W (Gde E-250 Quality A) complete all as specified and directed. |
| 10 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 11 | S &F Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and directed. |
| 12 | M&L for Steel reinforcement TMT bars 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | S & F MS angle iron Hand rails, fencing posts, flat iron including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 14 | M&L Pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 complete all as specified and as directed. |
| 15 | M&L for rendering 15mm thick in cement mortar (1:4) on brick or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all specified and directed. |
| 16 | Material and labour for Preparation of new plastered surfaces of wall and applying two coats of cement based paint over one coat of primer complete all as specified and as directed. |
| 17 | Surface excavation n exc 30 cm deep and avg 15 cm deep and getting out in hard/dense of soil complete all as specified and directed. |
| 18 | M&L hard core broken stone of guage n exc 63mm deposited spread and levelled in llayers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 19 | M & L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in Hard standing etc. with , spike rolling ,or making impression of expanded metal, while the concrete is green complete all as specified and directed. |
| 20 | M&L 75mm thick PCC type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base for floor etc, complete all as specified and directed |
| 21 | M&L 300mmx300mmx25mm thick pre-polished cement concrete chequered tile jointed in neat cement slurry and pointed in white or coloured cement to match the floor, complete, all as specified and directed. |
| 22 | M&L for screedbed or bedding layer of cement mortar 20mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 23 | M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over sand cushion with grey cement and colour pigment all as specified and directed. |
| 24 | M & L for Sand filling under floors or in foundations including watering and consolidation and all as specified and directed. |
| 25 | M&L Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, set in CM 1:4 as in cover slab and similar work incl necessary formwork complete all as specified and directed. |
| 26 | M&L 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Material and labour for modular workstation, with the following specifications (overall dimension of the workstation : 3000mm Length X 1200mm Width X 1200mm Height as shown in the drawings) 50 mm Thick Tile Based Ms frame with Aluminium Trim Partition of 1200mm Ht. with powder coating finish. (Grommet Hole above the table top), 50mm thk frames made out of MS CRCA sheetof thickness 1.00 mm with powder coated and top, sides fixed with Aluminium trims and junctions with PVC caps. Along with 25mm thick BSL PLPB Gable end Above table top provided with 9mm fabric or writing tile on outer side and inner side of workstation. below the table top bottom tiles finished with 9mm Prelaminated tiles with approved colour. LEG (Ms powder coated 40sq tube leg of 1.60 mm thickness), SKIRTING (To have MS powder coated skirting as per the company standard), Table Top (Table top made out of 25mm thick prelaminated particle board of width 600mm with 2mm thk PVC edge band finished and side partition front wall side 12mm toughened glass as per approved) Computer Key Board with suitable tray (02 Nos) in each cabin fixed with screws to telescopic channel of suitable size (PVC Key Board Tray mounted below the table top), All the members connected to each other by the means of stainless steel cleats/fixed with brass screws etc Pedestal with 2D1F drawers :- (Product Dimensions: 600mm(H)x400(L)x450(D) Primary Material: 18mm Engineered wood with 2mm machine edge banding Drawers: 2 Equal drawer 1 File drawer with 1 lock), fixed with screws to telescopic channel of suitable size , 75mm Stainless Steel Handles complete all as specified and directed. |
| 28 | Material and labour for modular workstation, with the following specifications (overall dimension of the workstation : 1500mm Length X 1200mm Width X 1200mm Height as shown in the drawings) 50 mm Thick Tile Based Ms frame with Aluminium Trim Partition of 1200mm Ht. with powder coating finish. (Grommet Hole above the table top), 50mm thk frames made out of MS CRCA sheetof thickness 1.00 mm with powder coated and top, sides fixed with Aluminium trims and junctions with PVC caps. Along with 25mm thick BSL PLPB Gable end Above table top provided with 9mm fabric or writing tile on outer side and inner side of workstation. below the table top bottom tiles finished with 9mm Prelaminated tiles with approved colour. LEG (Ms powder coated 40sq tube leg of 1.60 mm thickness), SKIRTING (To have MS powder coated skirting as per the company standard), Table Top (Table top made out of 25mm thick prelaminated particle board of width 600mm with 2mm thk PVC edge band finished partition front wall side 12mm toughened glass as per approved) Computer Key Board with suitable tray fixed with screws to telescopic channel of suitable size (PVC Key Board Tray mounted below the table top), All the members connected to each other by the means of stainless steel cleats/fixed with brass screws etc Pedestal with 2D1F drawers :- (Product Dimensions: 600mm(H)x400(L)x450(D) Primary Material: 18mm Engineered wood with 2mm machine edge banding Drawers: 2 Equal drawer 1 File drawer with 1 lock), fixed with screws to telescopic channel of suitable size , 75mm Stainless Steel Handles complete all as specified and directed. |
| 29 | Note :- An amount of Rs 0.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
