|
| 1 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed. |
| 2 | Material and Labour for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits) with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. and including medium grade PVC conduit concealed/ surface on wall/roof/floor etc, ISI marked with suitable accessories , mild steel/pressed steel sunken box of 1.2 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/ aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc also chisselling on wall complete and making all good the disturbed work to matching the existing surfaces / wall / ceiling by cement mortar 1:4 with painting to match existing and including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge. |
| 3 | One light point controlled by one switch complete all as specified and directed |
| 4 | One Fan point controlled by one switch complete all as specified and directed |
| 5 | One 5 pin 6 Amps socket outlet on independent board complete all as specified and directed |
| 6 | One 5 pin 6 Amps socket outlet on same board complete all as specified and directed |
| 7 | Bell /buzzer point controlled by one push button complete all as specified and directed |
| 8 | One light point controlled by two way switch complete all as specified and directed |
| 9 | All as per item No 01 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor 1100 v grade PVC insulated but unsheathed copper conductor FRLS cable 1100 volts grade and 2.5 sqmm PVC insulated but unsheathed FRLS cable as earthwire for 16 Amps power point on independent board complete all as specified and directed by Engr-in-charge. |
| 10 | Supply and Fix in repair switch piano type, one way, 6 Amp complete all as specified and directed. |
| 11 | Supply and Fix in repair switch piano type 16 Amps complete all as specified and directed. |
| 12 | Supply and Fix in repair Bell push, flush type, 6 Amp complete all as specified and directed. |
| 13 | Supply and Fix in repairswitch piano type two way 6 Amps complete all as specified and directed. |
| 14 | Supply and Fix in repair socket outlet 2 in1,3 pin 5 Amps complete all as specified and directed. |
| 15 | Supply and Fix in repair socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type in complete all as specified and directed. |
| 16 | Supply and Fix in repair switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and directed. |
| 17 | Supply and Fix in repair switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as specified and directed. |
| 18 | Supply and Fix in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amps Box type complete all as specified and directed. |
| 19 | Supply and Fix in repair switch socket combination 2 in 1, 3 pin, 5 Amps Box type complete all as specified and directed. |
| 20 | Supply and Fix in repair switch modular type, one way, one module 6 Amp complete all as specified and directed.Make- Anchor |
| 21 | Supply and Fix in repair switch modular type, one way, one module 16 Amps complete all as specified and directed.Make :- Anchor |
| 22 | Supply and Fix in repair modular switch Bell push, flush type, 6 Amp complete all as specified and directed.Make :- Anchor |
| 23 | Supply and Fix in repair switch modular type, one module, two way 6 Amps complete all as specified and directed.Make :- Anchor |
| 24 | Supply and Fix in repair modular socket outlet 2 in1, 3 pin, 2 module, 6 Amps flush type complete all as specified and directed. Make :- Anchor |
| 25 | Supply and Fix in repair modular socket outlet 2 in 1, 3 pin, 2 module 6 and 16 Amps flush type in complete all as specified and directed. Make :- Anchor |
| 26 | Supply and Fix in repair Modular switch socket outlet 3 pin, 16 Amps flush type complete all as specified and directed. Make :- Anchor |
| 27 | Supply and Fix in repair switch socket combination 3 pin, 6 Amps flush type complete all as specified and directed. Make :- Anchor |
| 28 | Supply and Fix in repair PVC ceiling rose surface type three terminals type complete all as specified and directed. |
| 29 | Supply and Fix in repair Buzzer / ding dong AC 230 volts, 6 Amp single Phase in white /Ivory colour finish complete all as specified and directed. |
| 30 | Supply and Fix in repairs Single pole and neutral enclosure with a metal two pin and earth plug and metal clad socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 31 | Supply and Fix in repairs surface and wall mounted Regal Batten with including T8 tube rod energy efficient 20 W LED (four feet) complete all as specified and directed.Make : Havells/ Wipro/ Philips |
| 32 | Supply and Fix in repairs surface and wall mounted LED T5 integrated Batten with integrated electronic driver energy efficient 10W LED (Two feet) decorative complete in all respect complete all as specified and directed.Make : Havells/ Wipro/ Philips |
| 33 | Supply and Fix including Taking down square 600 mm X 600 mm, 36 w to 42 w Reccesse mounted bottom opening LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 to 42 w,140V to 260 V AC ,System lumen out put min 3600 lumen in 36 w and 4200 lumen in 42 w with 5700 to 6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and Registration no complete all as specified and directed.Make : Havells/Crompton / WIPRO/ Philips |
| 34 | Supply and Fix including Taking down square 600 mm X 600 mm, 36 w to 42 w Surface mounted bottom opening LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 to 42 w,140V to 260 V AC ,System lumen out put min 3600 lumen in 36 w and 4200 lumen in 42 w with 5700 to 6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and R Registration no complete all as specified and directed.Make : Havells/Crompton / WIPRO/ Philips |
| 35 | Taking down old unserviceable fitting, and Supply and Fix 20 W ultra bright glass LED Tube Rod of size 4 ft all complete all as specified and directed. Make: Havells/ Wipro/ Philips |
| 36 | Supply and Fix in repair wall mounted extruded PVC housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4' long) lumen 2000 to 3000, PF> 0.9, THD less 10% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement complete all as specified and directed.Make : Havells/Crompton / Wipro/ Philips |
| 37 | Taking down old unserviceable fitting and Supply and Fix New genration energy saving environment friendly long life LED street light 25 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seprate driver compartment with IP66 Protection and impact resistance of IK07 Building security lights complete all as specified and directed. Make : Havells/ Wipro/ Philips |
| 38 | Taking down old unserviceable fitting and Supply and Fix Recess/ surface mounting LED edgelit slim round down lighter made of PDC AI. With high efficient LEDs and glare free Opal diffuser, IP 20 complete all as specified and directed. Cat Part :- HLDLR-R06-22-CW Note:- Size of LED fitting will be considered as per ground requirement. |
| 39 | Taking down old Unserviceable & Supply and Fixing Plano Surface 4x1 G2 Version, 36 Watt Recess mounting LED Light fitting including Suspended Chain arrangement with neccessary fixture,LED Lamp with CRCA housing White powder coated finish and polycarbonate diffuser, LED Fixture system wattage 36 watt,140V to 270 V AC,System lumen out put min 3600 lumen in 36 watt with 5700 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and Registration no complete all as specified and directed. Make Cat Part-PLANOSUR4X1PLS36LED857G2S, PHILIPS/WIPRO |
| 40 | Taking down old unserviceable Tube light fitting of any type and Supply and Fix Suspended Architectural LED 40 Watt fitting with CRCA white powder Coated housing high quality indoor batten LED tube 40 watt colour temperature 5700 K (4' long) lumen 3700 to 4100, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge complete all as specified and directed. Make Cat Part- CONSTA 1144LP40WLED857SPCWH, PHILIPS/WIPRO/Crompton |
| 41 | Supply and fix in repair LED Driver suitable for recess mounting LED Light fitting 32W to 42W watt of (any Make) 600 mm x 600mm size complete all as specified and directed. Make : Crompton / bajaj/ Havells/HPL/Syska |
| 42 | Supply & fix in repair PIR Motion sensor of detection range 360 , detection distance more than 6 mtr,installation height 2.5mtr to 4 mtr and detection movement speed .06-1.5 m/s including necessary wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor complete all as specified and directed. Make Crabtree: Product code ACSBA005 |
| 43 | Supply & fix in repair PIR surface mounted Motion sensor of detection range 360 , detection distance more than 20 mtr,installation height 2.5mtr to 6 mtr and detection movement speed .06-1.5 m/s including necessary wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor complete all as specified and directed. Make: Crabtree: Product code ACSBA005 |
| 44 | Supply and Fix in repair sheet metal enclosure MCB DB VTPN 6 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system complete all specified and as directed. Make- Standard, Indoasian,L&T |
| 45 | Supply and Fix in repair sheet metal enclosure MCB DB TPN 8 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system complete all as specified and directed. Make- Standard, Indoasian,L&T |
| 46 | Supply and Fix in repair sheet metal enclosure MCB SPN DB way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and directed for following. Make- Standard, Indoasian,L&T |
| 47 | SPN DB 8 way |
| 48 | SPN DB 4 way |
| 49 | Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into including PVC conduit of size 25 mm dia including 2.5 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. |
| 50 | Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC conduit of size 25 mm dia including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or sizecomplete all as specified and directed. |
| 51 | Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC conduit of size 25 mm dia including 6 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. |
| 52 | Taking down old submain wiring and Material and Labour for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into and including PVC conduit of size 25 mm dia including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed.Note: Four single core cable, earth wire and conduit / casing capping shall be measured as one length. |
| 53 | Taking down old submain wiring and Material and Labour for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into and including PVC conduit size 32mm of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed.Note: Four single core cable, earth wire and conduit / casing capping shall be measured as one length. |
| 54 | Supply and Fix in repair MCB TPN rated capacity 63 Amps, 415 volts breaking capacity 16 KA complete all as specified and directed. Make - Standard/indoasian/L&T |
| 55 | Supply and Fix in repair MCB TPN rated capacity 40 Amps, 415 volts breaking capacity 16 KA complete all as specified and directed. Make - Standard/indoasian/L&T |
| 56 | Supply and Fix in repair MCCB rated capacity 40 to 100 Amps, 415 volts breaking capacity 16 KA ,as Per existing complete all as specified and directed. Make - Standard/indoasian/L&T |
| 57 | Supply and Fix in repair MCB Single pole and neutral (SPN) rated capacity 40A to 63A , 240 volts breaking capacity 10 KA complete all as specified and directed. Make - Standard/indoasian/L&T |
| 58 | Supply and Fix in repair MCB Single pole and neutral (SPN) rated capacity 32A , 240 volts breaking capacity 10 KA complete all as specified and directed. Make - Standard/indoasian/L&T |
| 59 | Supply and Fix in repair MCB Single pole (SP) rated capacity 6 to 32 A, 240 volts breaking capacity 10 KA complete all as specified and directed. Make - Standard/indoasian/L&T |
| 60 | Supply and Fix in repairs thermostats ISI marked as required at site for geyser of capacity 25/35/50 Ltr of any make complete all as specified and directed. |
| 61 | Supply and Fix in repairs safety valve/high pressure valve ISI marked as per site requirement or complete all as specified and directed. |
| 62 | Supply and Fix in repairs heating element of rating 1.5/2 KW as required at site including rubber washers complete all as specified and directed. |
| 63 | Supply and Fix in repairs PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection complete all as specified and directed. |
| 64 | Supply and Fix in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 CM long for hot water connection complete all as specified and directed. |
| 65 | Supply and Fix in repairs, non return valve 15 mm dia of brass, ISI marked complete all as specified and directed. |
| 66 | Material and Labour for refixing of geysers of any capacity to walls by grouting with new nut,bolts and refiixng the geysers at a location directed by Engr-in-charge complete with all necessary pipe connections, testing complete all as specified and directed. |
| 67 | Supply and Fix in repair plug top 16 Amps flush type complete all as specified and directed. |
| 68 | Material and Labour in repair for stop valve , cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore complete all as specified and directed. |
| 69 | Taking down carefully ceiling fan of any make, size from its location,dimantling complete fan ,examine complete parts thoroughly, servicing oiling, greasing all parts and complete overhauling of fan including painting of ceiling fan complete in situ with synthetic enamel paint, white colour by spraying including filling cavities with filler, one coat after cleaning all dust, replacement of small parts such as split pin, nut bolt,screw and assembling complete fan and make fully functional with replacement of old unservicable rewinding with new rewinding of fan, refixing the fan to its original position including replacement of three core PVC insulated multi strandard copper wire 1.5 sq mm 1100 Volts grade from fan connector to ceiling rose complete all as specified and directed. Note : Ball bearing, bush fan blade etc will be measured and paid seperately under relevant item of schedule as supply only. |
| 70 | All as per item No 61 above but Exhaust Fan of sweep 150 to 350 mm complete all as specified and directed. |
| 71 | Supply only ball bearing(DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-charge. Make : SKF/NBC or equivalent |
| 72 | Supply only ball bearing to match the existing make suitable for 150 to 350 mm exhaust fan inclduing greasing. Make : SKF/NBC or equivalent |
| 73 | Supply and Fix in repair only fan regulator suitable for 1200/1400 mm ceiling fans (electronics step type) complete all as specified and directed. Make-Anchor |
| 74 | Supply only capacitor 2.5 mfd for ceiling fan complete all as specified and directed.Make:Havells/Epcos/Usha |
| 75 | Supply only capacitor 4 mfd for exhaust fan complete all as specified and directed. Make:Havells/Epcos/Usha |
| 76 | Taking down carefully old unserviceable existing copper strip of size 20 mm x 3 mm and Supply & fix copper strip 20 mm x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed. |
| 77 | Supply & fix in repair Aluminium strip 25 mm x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed. |
| 78 | Fixing only in repair aluminium strip 25 mm x 3mm complete with saddles and screws for fitting the strip complete all as specified and directed. |
| 79 | Supply &Fix in repair GI strip 32 mm x 6 mm complete with saddles and screws for fitting the strip complete all as specified and directed. |
| 80 | Material and Labour for Air terminations single pointed Aluminium rod 12 mm dia and 300 mm long with necessary fixing copper wire with copper lugs and suitable nut bolt arrangements on roof including taking down old complete all as specified and directed. |
| 81 | Supply & fix four pointed ( centre tip 150mm and side spike 75mm) copper spike lighting arrester heavy duty copper rod of size 15 mm dia both end screwed for easy fitment and 1.5mtr long and heavy duty copper base plate duly drilled on four corners of size 75mm x 75mm ,with necessary fixing arrangement on Top/side of pole complete including taking down old complete all as specified and directed. |
| 82 | Supply and fix test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. head screw including taking down old complete all as specified and directed. |
| 83 | Material & labour in repair for fixing of 50 mm bore GI Pipe medium grade galvanised 1.5 mrt. long fixed on wall with proper fixing and clamping of strip & 1.5 mtr to 300mm long copper/Aluminium lightening arrester rod with all fitting and fixed complete to wall or roof top of bldg complete all as specified and directed. Note: Joints shall be made with welding to get proper conductivity Please Enable Macros to View BoQ information |
| 84 | Material & labour in repair for fixing of 50 mm bore GI Pipe medium grade galvanised 1.5 mrt. long fixed on wall with proper fixing and clamping of strip & 1.5 mtr to 300mm long copper/Aluminium lightening arrester rod with all fitting and fixed complete to wall or roof top of bldg complete all as specified and directed. Note: Joints shall be made with welding to get proper conductivity Please Enable Macros to View BoQ information |
