|
| 1 | REPAIRS TO TABLE OFFICE CLERK STEEL : FD-84,34, 1004 |
| 2 | (a) Removing userviceable drawer of Table office clerk steel and providing and fitting new drawer made out of MS sheet 1mm thick all as directed. |
| 3 | (b) Removing unserviceable lock of Table office clerk steel and providing and fitting new brass lock with stainless steel duplicate key all as directed. |
| 4 | (c) Removing unserviceable mild steel square tube of Table office clerk steel and providing and welding new square tube of 25 x 25mm, 18 gauge all as directed. |
| 5 | (d) Removing unserviceable table top of Table office clerk steel and providing and fitting new top of the same made out of 18mm thick exterior grade pre-laminate MDF board of colour as decided by Engineer -in-chrg with teak wood beading all round the table top complete all as directed. |
| 6 | (e) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 7 | REPAIRS TO TABLE OFFICE OFFICER STEEL : FD-84, 1003,1002 |
| 8 | (a) Removing userviceable drawer of Table office officer steel and providing and fitting new drawer made out of MS sheet 1mm thick all as directed. |
| 9 | (b) Removing userviceable door of Table office officer steel and providing and fitting new door made out of MS sheet 1mm thick all as directed. |
| 10 | (c) Removing unserviceable lock of Table office officer steel and providing and fitting new brass lock with stainless steel duplicate key all as directed. |
| 11 | (d) Removing unserviceable mild steel square tube of Table office officer steel and providing and welding new square tube of 25 x 25mm, 18 gauge all as directed. |
| 12 | (e) Removing unserviceable table top of Table office officer steel and providing and fitting new top of the same made out of 18mm thick exterior grade pre-laminate MDF board of colour as decided by Engineer -in-chrg with teak wood beading all round the table top complete all as directed. |
| 13 | (f) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 14 | REPAIRS TO TABLE 3' X 2' STEEL WITHOUT DRAWER : FD-1007 |
| 15 | (a) Removing unserviceable table top of Table 3' X 2' steel without drawer and providing and fitting new top of the same made out of 18mm thick exterior grade pre-laminate MDF board of colour as decided by Engineer -in-chrg with teak wood beading all round the table top complete all as directed. |
| 16 | (b) Removing unserviceable mild steel square tube of Table 3' X 2' steel without drawer, providing and welding new square tube of 25 x 25mm, 18 gauge all as directed. |
| 17 | (c) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 18 | REPAIRS TO TABLE 3' X 2' STEEL WITH DRAWER : FD-1008 |
| 19 | (a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminated exterior grade MDF board of colour as decided by Engineer -in-charge with teak wood beading all round the table top complete all as directed. |
| 20 | (b) Removing userviceable drawer of Table 3'X2' steel with drawer and providing and fitting new drawer made out of MS sheet 1mm thick all as directed. |
| 21 | (c) Removing unserviceable mild steel square tube of Table 3' X 2' steel with drawer and providing and welding new square tube of 25 x 25mm, 18 gauge all as directed. |
| 22 | (d) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 23 | REPAIRS TO TABLE 3' X3' STEEL WITH OUT DRAWER : FD-1009 |
| 24 | (a) Removing unserviceable table top of Table 3' X 3' steel without drawer and providing and fitting new top of the same made out of 18mm thick exterior grade pre-laminate MDF board of colour as decided by Engineer -in-chrg with teak wood beading all round the table top complete all as directed. |
| 25 | (b) Removing unserviceable mild steel square tube of Table 3' X 3' steel without drawer, providing and welding new square tube of 25 x 25mm, 18 gauge all as directed. |
| 26 | (c) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 27 | REPAIRS TO BOOK CASE STEEL FD-1028, FD-90 |
| 28 | (a) Removing existing broken glass pane and supply and fix new glass pane of 5mm thick to doors of book case steel and all as per drg and directed by Egineer -in charge. |
| 29 | (b) Removing of existing unserviceable locks from book case steel and providing new locks all as per drg. |
| 30 | (c) Removing userviceable shutter of Book case steel and providing and fitting new shutter made out of MS sheet 1mm thick incl 5mm thick glass pane all as directed. |
| 31 | (d) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 32 | REPAIRS TO FORM WITHOUT BACK : FD-75, FD-1027 |
| 33 | (a) Removing existing unserviceable planks and supply and fix second class hardwod planks of 25mm thick of size 1900 x 255mm thick and shape with apropriate nutbolts as specified and as per drawing. |
| 34 | (b) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 35 | REPAIRS TO FORM WITH BACK : FD-75, FD-1027 |
| 36 | (a) Removing of existing unserviceable seat and back planks from Form with Back and supply and fix second class hardwood planks of 25mm thick of size 1800 x 255mm and shape with apropriate nutbolts as specified and as per drawing. |
| 37 | (b) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 38 | WELDING TO STEEL FURNITURE |
| 39 | (a) Meterial & labour for spot welding of steel items of broken joints etc. not exceeding 2.5cm in length and thickness 6mm including scraping preparing surfaces of welded protion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion only. |
| 40 | REPAIRS TO STEEL CHAIRS : FD-256,259,359,75,FD/MAP-II/06 |
| 41 | (a) Removing the existing wornout nylone newar from chair varandah and reweaving the same with new standard 50mm wide nylon newar white as per drawing. Including paint all steel surface of chair. |
| 42 | (b) Removing of existing wornout unserviceable cane of chair varandah and recanning with new standard 4mm wide white plastic cane of semi circular type in mat pattern all as specified and directed. Including paint all steel surface of chair. |
| 43 | (c) Removing of existing unserviceable PVC seat / back of chair varandah MAP and replace with new same PVC seat / back mat pattern all as specified and directed Including paint all steel surface of chair. |
| 44 | (d) Removing existing unserviceable seat of chair CB steel w/arm, supply and fix new seat made out of second class hard wood duly canned as per godrej pattern & paint in Black shade glossy finish with suitable screw&nut. |
| 45 | (e) All as per item No 10.04 here in before but back of chair CB steel with Arms |
| 46 | (f) All as per item No 10.04 here in before but seat for chair CB steel without arm |
| 47 | (g) All as per item No 10.04 here in before but back for chair CB steel without arm. |
| 48 | (h) All as per item No 10.04 here in before but arm rest with suitable screw. |
| 49 | (j) Supply and fix plastic shoe for chair CB steel with suitable screw. |
| 50 | (k) Supply and fix tubular shoe superior quality for chair varandah. |
| 51 | BED HARD STEEL : FD/E6/MAP/08, 08(R) |
| 52 | (a) Removing of existing 12mm thick commercial plywood from Bed Hard Steel and supply and fix new commerical plywood 12mm thick BWP Marine IS 710 (2024) grade of Make:- Kitply / Greenply / Century Ply and screw down to the mild steel square tube with appropriate machine screw and nut complete all as directed. |
| 53 | (b) Removing the unserviceable MDF plank from Headrest of Bed hard Steel and replacing the same with 18 mm thick exterior grade MDF board as per drawing and dircted by Engr-in-Chrg. |
| 54 | (c) Removing the unserviceable MDF plank from Footrest of Bed hard Steel and replacing the same with 18 mm thick exterior grade MDF board as per drawing and dircted by Engr-in-Chrg. |
| 55 | (d) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 56 | ALMIRAH LARGE STEEL WITH SHELVES :FD-351, 1031, FD/E6/MAP/18 |
| 57 | (a) Removing the existing unserviceable shelves of Almirah large steel with shelves and providing new shelves made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 58 | (b) Removing the existing unserviceable Legs of Almirah large steel with shelves and providing new Legs made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 59 | (c) Removing the existing unserviceable Door of Almirah large steel with shelves and providing new Door made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 60 | (d) Removing the existing unserviceable handle of Almirah large steel with shelves and providing steel chromium plated handle of size, design as existing. |
| 61 | (e) Removing the existing unserviceable complete mechanisam of consild Godrej pattern lock with handle from Almirah large steel with shelves supply and fix new consiled Godrej pattern lock with handle. |
| 62 | (f) Removing the existing unserviceable threeway locking system from Almirah large steel with shelves supply and fix new threeway locking system with handle. |
| 63 | (g) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Make: Asian Paints/ Nerolac/ Berger to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 64 | ALMIRAH LARGE STEEL 1/2 HG 1/2 SH : FD-1033 |
| 65 | (a) Removing the existing unserviceable shelves of Almirah large steel 1/2 Hg 1/2 Sh and providing new shelves made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 66 | (b) Removing the existing unserviceable Legs of Almirah large steel 1/2 Hg 1/2 Sh and providing new Legs made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 67 | (c) Removing the existing unserviceable Door of Almirah large steel 1/2 Hg 1/2 Sh and providing new Door made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 68 | (d) Removing the existing unserviceable handle of Almirah Large Steel 1/2 Hg 1/2 Sh and providing steel chromium plated handle of size, design as existing. |
| 69 | (e) Removing the UNSV complete Mechanisam of consild Godrej pattern lock with handle from Almirah Large Steel 1/2 Hg 1/2 Sh supply and fix new consiled Godrej pattern lock with handle. |
| 70 | (f) Removing the UNSV threeway locking system from Almirah Large Steel 1/2 Hg 1/2 Sh supply and fix new threeway locking system with handle. |
| 71 | (g) Removing the UNSV Hanging Rod from Almirah Large Steel 1/2 Hg 1/2 Sh supply and fixed the same with new Steel Hanging Rod. |
| 72 | (h) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 73 | ALMIRAH MEDIUM STEEL WITH SHELVES : FD-67, 243, 1032 |
| 74 | (a) Removing the existing unserviceable shelves of Almirah Med steel with shelves and providing new shelves made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 75 | (b) Removing the existing unserviceable Legs of Almirah Med steel with shelves and providing new Legs made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 76 | (c) Removing the existing unserviceable Door of Almirah Med steel with shelves and providing new Door made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 77 | (d) Removing the existing unserviceable handle of Almirah Med steel with shelves and providing steel chromium plated handle of size, design as existing. |
| 78 | (e) Removing the existing unserviceable complete mechanisam of consild Godrej pattern lock with handle from Almirah Med steel with shelves supply and fix new consiled Godrej pattern lock with handle. |
| 79 | (f) Removing the existing unserviceable threeway locking system from Almirah Med steel with shelves supply and fix new threeway locking system with handle. |
| 80 | (g) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 81 | ALMIRAH MED 1/2 HG 1/2 SH STEEL: FD-1034 |
| 82 | (a) Removing the existing unserviceable shelves of Almirah large steel 1/2 Hg 1/2 Sh and providing new shelves made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 83 | (b) Removing the existing unserviceable Legs of Almirah large steel 1/2 Hg 1/2 Sh and providing new Legs made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 84 | (c) Removing the existing unserviceable Door of Almirah large steel 1/2 Hg 1/2 Sh and providing new Door made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 85 | (d) Removing the existing unserviceable handle of Almirah Large Steel 1/2 Hg 1/2 Sh and providing steel chromium plated handle of size, design as existing. |
| 86 | (e) Removing the UNSV complete Mechanisam of consild Godrej pattern lock with handle from Almirah Large Steel 1/2 Hg 1/2 Sh supply and fix new consiled Godrej pattern lock with handle. |
| 87 | (f) Removing the UNSV threeway locking system from Almirah Large Steel 1/2 Hg 1/2 Sh supply and fix new threeway locking system with handle. |
| 88 | (g) Removing the UNSV Hanging Rod from Almirah Large Steel 1/2 Hg 1/2 Sh supply and fixed the same with new Steel Hanging Rod. |
| 89 | (h) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 90 | LOCKER BEDSIDE STEEL: FD-1029 |
| 91 | (a) Removing the existing unserviceable shelves of Locker bedside steel and providing new shelves made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 92 | (b) Removing the existing unserviceable Legs of Locker bedside steel and providing new Legs made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 93 | (c) Removing the existing unserviceable Door of Locker bedside steel and providing new Door made outoff CRAC steel sheet, 1 mm thick, cut to size, shape etc as per drg and all as directed. |
| 94 | (d) Removing the existing unserviceable handle of Locker bedside steel and providing steel chromium plated handle of size, design as existing. |
| 95 | (e) Removing the existing unserviceable Hasp and Staple of Locker Bed Side Steel and providing steel chromium plated Hasp and Staple of size, design as existing. |
| 96 | (f) Removing the UNSV Hanging Rod from Lokcer bedside steel supply and fixed the same with new Steel Hanging Rod. |
| 97 | (g) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 98 | TABLE DINING ORs : FD-165(M) |
| 99 | (a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick exterior grade pre-laminate MDF board of colour as decided by Engineer -in-charge with 4mm thick teak wood beading all round the table top complete all as directed. |
| 100 | (b) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick Commercial Ply coverd with 1 mm thick Aluminium Sheet all as directed. |
| 101 | (c) Removing unserviceable mild steel square tube of Table Dining ORs and providing and welding new square tube of 25 x 25mm, 16 gauge all as directed. |
| 102 | (d) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 103 | TEAPOY VARANDAH : FD- 255, |
| 104 | (a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-charge with 4mm thick teak wood beading all round the table top complete all as directed. |
| 105 | (b) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 106 | TEAPOY VARANDAH MAP : FD/E6/MAP/17 |
| 107 | (a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-charge with 4mm thick teak wood beading all round the table top complete all as directed. Applying one coat of synthetic paint all exposed steel surface. |
| 108 | (b) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 109 | CHAIR SCHOOL WITH HANDBOARD : FD/E6/MAP/05 |
| 110 | (a) Removing the existing UNSC Handboard from chair school and supply and fixing new Handboard made of 18/19 mm thick prelaminated MDF board colour as decided by Engr-in-charge with 4mm thick teakwood beading al round the top and including welding and all connecting work. Applying one coat of synthetic paint all exposed steel surface. |
| 111 | (b) Removing the existing UNSV Plastic sheet from chair school and supply and fix new plastic of best qaulity with ISI mark as approved by Engr-in-charge. |
| 112 | (c) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 113 | CHAIR CBA STEEL WITH SPL HAND REST (PVC): FD-260 |
| 114 | (a) Removing the existing UNSC Handboard from chair school and supply and fixing new Handboard made of 18/19 mm thick prelaminated MDF board colour as decided by Engr-in-charge with 4mm thick teakwood beading al round the top and including welding and all connecting work. Applying one coat of synthetic paint all exposed steel surface. |
| 115 | (b) Removing the existing UNSV Plastic seat from Chair CBA steel with spl handrest and supply and fix new plastic seat of best qaulity with ISI mark as approved by Engr-in-charge. |
| 116 | (c) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 117 | CHAIR CB A SPL WITH HAND REST : FD_120(M) |
| 118 | (a) Removing the existing UNSC Handboard from Chair CBA spl with handrest and supply and fixing new Handboard made of 18/19 mm thick prelaminated MDF board colour as decided by Engr-in-charge with 4mm thick teakwood beading al round the top and including welding and all connecting work. |
| 119 | (b) Removing the existing UNSC cane of seat from Chair CBA spl with handrest and recaning with 2mm pastic cane in godrej pattern as per drg and as directed. |
| 120 | (c) Removing the existing UNSC cane of back from Chair CBA spl with handrest and recaning with 2mm pastic cane in godrej pattern as per drg and as directed. |
| 121 | (d) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 122 | Chair Writing MAP : FD/E6/MAP/12 |
| 123 | (a) Removing of existing UNSV Foam and tapestry Cloth of Seat from Chair Writing MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 124 | (b) Removing of existing UNSV Foam and tapestry Cloth of Back from Chair Writing MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 125 | (c) Removing of existing UNSV hand rest from Chair Writing MAP and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 126 | (d) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 127 | Chair Computer MAP : FD/E6/MAP/01 |
| 128 | (a) Removing of existing UNSV Foam and tapestry cloth of Seat from Chair Computer MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 129 | (b) Removing of existing UNSV Foam and tapestry cloth of Back from Chair Computer MAP and supply and fix new 32 density Foam Cushion with tapestry cloth/rexine all as approved and directed by Engr-In-Charge. |
| 130 | (c) Removing of existing UNSV caster wheel from Chair Computer MAP and S&F new caster wheel with the existing shape & size all as approved and directed by Engr-in-charge. |
| 131 | (d) Removing of existing UNSV Hydraulic Assembly from Chair Computer MAP and S&F new Hydraulic assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 132 | (e) Removing of existing UNSV Pedestal Assembly from Chair Computer MAP and S&F new Pedestal Assembly with the existing shape and size all as approved and directed by Engr-in-charge. |
| 133 | (f) Removing of existing UNSV hand rest from Chair Computer MAP and S&F new hand rest with the existing shape and size all as approved and directed by Engr-in-charge. |
| 134 | PLASTIC/RUBBER SHOE FOR VARIOUS STEEL FURNITURE |
| 135 | (a) Supply and fix Suitable Shoe Superior quality for Table Office Clerk Steel FD-84,34,1004 |
| 136 | (b) Supply and fix Suitable Shoe Superior quality for Table Office Officer Steel FD-84,1003,1002 |
| 137 | (c) Supply and fix Suitable Shoe Superior quality for Table 3'X2' Steel With / Without Drawer FD-1007, 1008 |
| 138 | (d) Supply and fix Suitable Shoe Superior quality for Table 3'X3' Steel Without Drawer FD-1009 |
| 139 | (e) Supply and fix Suitable Shoe Superior quality for Table computer.FD/E6/MAP/03 |
| 140 | (f) Supply and fix Suitable Shoe Superior quality for Bed Hard Steel.FD/E6/MAP/08 ® |
| 141 | (g) Supply and fix Suitable Shoe Superior quality for Table Dining Ors FD-78,165 |
| 142 | (h) Supply and fix Suitable Shoe Superior quality for Chair Varandah MAP.FD/E6/MAP/11 |
| 143 | (j) Supply and fix Suitable Shoe Superior quality for Teapoy Varandah.FD-386,255, FD/E6/MAP/17 |
| 144 | (k) Supply and fix Suitable Shoe Superior quality for Chair School with Handboard.FD/E6/MAP/05 |
| 145 | (l) Supply and fix Suitable Shoe Superior quality for Chair writing MAP.FD/E6/MAP/12 |
| 146 | TABLE BED SIDE STEEL :FD-15(M) |
| 147 | (a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick Plywood cover with 1 mm thick MS Sheet as per drg and as directed. |
| 148 | (b) Removing unserviceable shelves of Table Bed Side Steel and providing new shelf made out of 1 mm thick mild steel sheet duly necessary welding, cleats and bolts etc as per drg and as directed. |
| 149 | (c) Removing unserviceable door of Table Bed Side Steel and providing new door made out of 1 mm thick mild steel sheet duly necessary welding, cleats and bolts etc as per drg and as directed. |
| 150 | (d) Removing unserviceable side of Table Bed Side Steel and providing new side made out of 1 mm thick mild steel sheet duly necessary welding, cleats and bolts etc as per drg and as directed. |
| 151 | (e) Removing unserviceable back of Table Bed Side Steel and providing new back made out of 1 mm thick mild steel sheet duly necessary welding, cleats and bolts etc as per drg and as directed. |
| 152 | (f) Removing unserviceable bottom of Table Bed Side Steel and providing new bottom made out of 1 mm thick mild steel sheet duly necessary welding, cleats and bolts etc as per drg and as directed. |
| 153 | (g) Removing UNSV Knob of Table Bed Side Steel and providing and fixing same with new knob. |
| 154 | (h) Removing unserviceable Legs of Table Bed Side Steel and providing new legs made out of 25mm square tube and 1.6 mm thick mild steel sheet duly necessary welding, cleats and bolts etc as per drg and as directed. |
| 155 | (j) Supply and fix Suitable Shoe Superior quality for Table Bed Side Steel. |
| 156 | (k) Removing old paint and touching up with Red oxide primer where necessary denting and preparing the surfaces for spray / mannualy painting with two coat of synthetic enamel paint all as specified & directed. Paint to all internal and external surfaces by sprayer. Colour shade of paint shall be decided by Engineer -in- charge. |
| 157 | TABLE BED SIDE WITH DRAWER (MAP) FD/E6/MAP/15 (R) |
| 158 | (a) Removing the existing unserviceable drawer from Table bed Side W/Dr MAP and supply and fixing new drawer made out of 18 mm thick exterior grade prelaminated MDF board and bottom of drawer shall be 12 mm thick plywood with commercial face on both sides. Colour of MDF board & all as directed by Engr-in-Charge. |
| 159 | (b) Removing the existing unserviceable side from Table bed Side W/Dr MAP and supply and fixing new side made out of 18 mm thick exterior grade prelaminated MDF board. Colour of MDF board & all as directed by Engr-in-Charge. |
| 160 | (c) Removing the existing unserviceable back from Table bed Side W/Dr MAP and supply and fixing new back made out of 06 mm thick plywood with commercial face on both sides and all as directed by Engr-in-Charge. |
| 161 | (d) Removing the existing unserviceable bottom from Table bed Side W/Dr MAP and supply and fixing new bottom made out of 06 mm thick plywood with commercial face on both sides and all as directed by Engr-in-Charge. |
| 162 | (e) Removing the existing unserviceable top from Table bed Side W/Dr MAP and supply and fixing new top made out of 18 mm thick exterior grade prelaminated MDF board with teak wood beading all round the top. Colour of MDF board & all as directed by Engr-in-Charge. |
| 163 | (f) Removing the existing unserviceable door from Table bed Side W/Dr MAP and supply and fixing new door made out of 18 mm thick exterior grade prelaminated MDF board. Colour of MDF board & all as directed by Engr-in-Charge. |
| 164 | (g) Removing the existing unserviceable Telescopic Channel of drawer and S&F new telescopic channel with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 165 | (h) Removing the existing unserviceable handle and S&F new handle and all as approved and directed by Engr-in-Charge. |
| 166 | (j) Removing the existing unserviceable hinges from door and S&F new hinges and all as approved and directed by Engr-in-Charge. |
| 167 | (k) Taking out of unserviceable Maganetic catcher and S&F new Maganetic catcher with the existing size and shape all as approved and directed by Engr-in-Charge. |
| 168 | Rack Side 3/4 Spaces steel 6/13/2014 FD-1023,FD-97 |
| 169 | (a) Removing the existing unserviceable shelves from following Steel Racks providing new shelves made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete. |
| 170 | Rack Steel 6 Tier : FD-1038 |
| 171 | (a) Removing the existing unserviceable shelves from racks steel 6 tier providing new shelves made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded as per drg and as directed. |
| 172 | (b) Removing the existing unserviceable back from racks steel 6 tier with providing new Sides made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded as per drg and as directed. |
| 173 | (c) Removing the existing unserviceable side from racks steel 6 tier with providing new Sides made with mild steel sheet, 1 mm thick, cut to size, shape etc duly welded as per drg and as directed. Please Enable Macros to View BoQ information |
