|
| 1 | M&L Brick work except Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 2 | M & L for applying a thin layer of 0.50mm thick white wall care putty over old/newly plastered surface in walls/ceilings to prepare the surface even and smooth complete all as specified and directed. |
| 3 | M & L for preparation of new plastered/decorated wall surfaces and applying two coats of distempering with oil bound distemper as per manufacturer instruction white or tinted complete all as specified and directed. |
| 4 | M&L for two coats of oil bound distemper on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 3% by wt of cement. Note:-WPC measured and paid separatly |
| 6 | Supply Only integral water proofing compound |
| 7 | M & L for preparation of new plastered/decoarated wall surfaces and applying two coats of water proof cement base paint complete all as specified and directed. |
| 8 | M & L for Preparation of old decorated surfaces of walls and applying one coat of distempering with oil bound distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 9 | Re-fixing of CP grating 75 to 125 mm dia with white cement in toilet /bath room/WHB/Kitchen etc.. Complete all as specified and directed. |
| 10 | M&L for preparation and filling of pitting/cracks (including V groove cutting of cracks/deepening) on surfaces with crack seal and finishing the surfaces as per existing treatment complete all as specified and directed. |
| 11 | Taking down chowkhats or frames exc 1.5 Sqm but exc 4.0 Sqm (without taking shutters from the frame). Note:-During the execution of item,damaged portion of brick work/plaster etc make good as per SSR and no extra payment shall be deemed for the same to the contractor. |
| 12 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).Note:-During the execution of item,damaged portion of brick work/plaster etc make good as per SSR and no extra payment shall be deemed for the same to the contractor. |
| 13 | S&F aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. |
| 14 | S&F any colour, aluminum window and ventilator shutters, powder coated sliding/side hung type with sash bars, aluminium section weighing not less than 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 15 | Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 16 | S & F 200 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 17 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. |
| 18 | Hacking out old broken glass (any the size quality or description) from wooden and steel frames glazed all as specified and directed. |
| 19 | S&F 4mm thick sheet glass, pin head type and glazing with oil putty or wooden beads or rubber beading in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs) |
| 20 | S & F in repair 20mm bore cut to length as required stainless steel decorative draphery rods with brackets/end brackets and decorative finails as required colour complete all as specified and directed. |
| 21 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 300 mm all as specified and as directed. |
| 22 | S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions |
| 23 | S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. |
| 24 | S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed. |
| 25 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm. complete all as specified |
| 26 | Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed. |
| 27 | S & F in repair 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 28 | S & F in repair 25mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. |
| 29 | S & F in repair 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. |
| 30 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 31 | S&F Brass S/S peg set of hooks incl fixing to walls, wooden shutte complet all as specifeid and directed0 |
| 32 | S & F as in repair of Bib tap, fancy type standard of PTMT any colour high pressure screwed for iron pipe and fixed of 15 mm dia |
| 33 | Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution/clorin/KMnO4 and removing vegetation around the over head tank/plat form including , opening and reconnecting with existing tube as site requirement writing the date of cleaning with paint/stencil etc complete all as directed |
| 34 | S&F in Repair waste Coupling Suitable for Existing WHB/Sink all as specified |
| 35 | S & F in repairs waste pipe suitable for Existing WHB/Sink/Urinal etc. all as specified |
| 36 | Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified. |
| 37 | Removing of plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding, any type, any location/height (i.e roof parapet walls near pipes etc) and applying acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 200 mm) complete all as specified and directed. |
| 38 | Taking down existing door shutter with frame area exceeding 1 Sqm & n exc 2.5 sqm and re-fixing in same opening after repair/replace the defective jointing cleats/screws all as specified and directed |
| 39 | S&F in repair 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 40 | S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified |
| 41 | S & F in repair 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified. |
| 42 | S & F in repair 75 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified. |
| 43 | S & F radiant door bottom sealing strip guard for doors complete all as all as specified and directed. |
| 44 | S & F in repair 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) as approved welded to steel chowkets or scrwed to wooden chowkhats. . |
| 45 | M&L Prelaminated particleboard,18/19 mm thick, interior grade,prelaminated oneside with decorativechoice lamination & other side balancing white lamination incl edge beeding,fixed with screws totimber frame work |
| 46 | M & L for 0.9mm thick decorative laminate (mica) type 1 of surface finish , colour and pattern as approved , fixed with approved adhesive as manufacturer instructions complete all as specified and directed.. |
| 47 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 48 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 50 | M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:6 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting, polishing and rounding of edges etc. complete all as specified and directed. |
| 51 | M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 52 | M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.. |
| 53 | M & L for coloured glazed ceramic tiles in vertical surface 7mm thick exc 0.06 Sqm but not exc. 0.20 Sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4 as backing for tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring/wall tiles) |
| 54 | Note:- For attending day to day complaints 01xcarpenter with helper,01xplumber with helper and 01xmason with helper must be detailed to recieve job card from office and will be reported at 9:00 AM every day and no extra payment shall be deemed for the same to the contractor |
| 55 | Disconnecting existing PVC water storage tanks of capacity exc 500 ltrs & n exc 1000 ltrs, setting aside (or lowering if required) for laying of APP memberane or repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 56 | M&L for demolition of Concrete of any description incl sunken and in any position not otherwise specifically provided for |
| 57 | Demolition of cement concrete(reinforced) in any description in any position not otherwise specially provided disposal off from the premises at distance of not exc . 1 Km complete all as specified and directed. |
| 58 | M&L for PCC 1:2:4 type B-0 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified and directed |
| 59 | M&L for Screed bed or bedding layer of mortar 15 mm thick with CM 1:4 for laying floor/roof surface by using WPC as per manufacture's instructions (WPC paid seperately) |
| 60 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified |
| 61 | M&L for fixing APP based polymeric membrane minimum weighing 3.50kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced torch application omplete all as specified and directed.. |
| 62 | M & L for applying two coat of aluminium paint over surfaces of any description including preparation of surfaces etc complete. |
| 63 | Supply only liquid water proofing compound . |
| 64 | M&L for Cement concrete tiles 20cm x 20cm x 20mm thick with white cement and pigments for roof all as specified and directed |
| 65 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 66 | M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed |
| 67 | M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4.including taking down existing tiles. |
| 68 | M & L for coloured glazed ceramic tiles in vertical surface area of each tile not less than 0.06 Sqm and not exc 0.20 Sqm , 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4 as backing for tiles incl taking down old tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring/wall tiles) |
| 69 | M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 including taking down existing tiles complete. |
| 70 | All as per ser item No 68 above but as in vertical surfaces in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed. |
| 71 | M & L Machine cut Kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:6 incl dismantling of existing kota stone including cement mortar bedding (but not backing) complete all as specified and directed. |
| 72 | M & L Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing including dismantling of existing kota stone including cement mortar bedding (but not backing) complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 73 | M & L for 15 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing kota stone omplete all as specified and directed. |
| 74 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top omplete all as specified and directed. |
| 75 | M&L for 30mm thick,2nd class glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 76 | S&F Anodised aluminium window and ventilator shutters, Sliding/side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 77 | S&F Anodised aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat forfixing etc. complete all as specified and directed. |
| 78 | s&f 3mm thick shett glass ordinary qualtiyand glazing and with oil putty or woode beads or rubber beading in squares of any size complete all as specifed and directed |
| 79 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. |
| 80 | S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or rubber beading in squares of any size complete all as specified and directed |
| 81 | Dismantling structural steel work including doors, gates, grills but excluding framed truss etc complete omplete all as specified and directed. |
| 82 | S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 83 | M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces omplete all as specified and directed.. |
| 84 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 85 | M&L brickwork with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified. |
| 86 | Ditto as per item no 31 but except bricks |
| 87 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 88 | Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 89 | M & L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 90 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC Note:-WPC measured and paid separatly |
| 91 | M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. |
| 92 | M & L for applying a thin layer of 0.50mm thick Birla white putty/JK white wall care putty on new plastered/old wall and ceiling surfaces including removal of existing treatment and making the surface uniform and smooth complete all as specified and directed. |
| 93 | M & L for preparing new plastered wall surfaces and distempering two coats on walls with distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed. |
| 94 | M&L for two coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed. |
| 95 | M & L for preparing new plastered ceiling surfaces and distempering two coats on ceilings with distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed. |
| 96 | M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of walls/Ceiling and applying two coat of distempering with acrylic distemper as per manufacturer instruction white or tinted complete all as specified and directed. |
| 97 | M&L for two coats cement base paint over a coat of primer including preparation of old decorated wall surfaces complete incl complete removal of existing treatment |
| 98 | M & L for one coat of exterior emulsion paint white or tinted on walls / fascia of roof or chajjas on old prepared/painted wall surfaces of bldg complete all as specified and directed. |
| 99 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sqm not exc 4.00Sqm each. |
| 100 | S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc. |
| 101 | S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame |
| 102 | S&F 75mm long Stainless steel butt hinges with steel hinge pin etc.complete all as specified. |
| 103 | S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified. |
| 104 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified. |
| 105 | S&F Mild steel sliding door bolts, 300mm long,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed |
| 106 | S&F in repair 100 mm long Stainless steel butt hinges with steel hinge pin etc. |
| 107 | S&F in repair 150 mm long aluminium anodised barrel tower bolt complete all as specified. |
| 108 | S&F in repair 150mm long aluminium anodised handle cast type and fixed D Type complete all as specified. |
| 109 | S&F in repair Mild steel sliding door bolts, 300mm long,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed |
| 110 | Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads. |
| 111 | S&F in repair 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs) |
| 112 | S & F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed |
| 113 | S & Fin repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) → |
| 114 | Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed |
| 115 | Supplying and laying as in repair of CPVC pipes 15mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed |
| 116 | S & F in repair of 15mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.. |
| 117 | S & F in repair of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.. |
| 118 | S & F in repair of 20mm dia CPVC ball valve complete. |
| 119 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 120 | S & F as in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of lime concrete bedding complete all as specified and as directed. |
| 121 | S & F as in repair normal closing white Seat Cover for EWC incl all accessories complete all as specified and directed. |
| 122 | S & F as in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 123 | S & F as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 124 | S & F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe but including 32mm dia chromium plated waste fittings with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 125 | S&F in repair 15 mm dia bore pillar taps ,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 126 | S & F in repair 600x450mm bevelled edges 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. |
| 127 | S & F in repair 450mm long chromium plated tubular towel rail 20mm dia, D type fixed with rawl plugs in cement mortar 1:3 with MS screws complete all as specified and directed. |
| 128 | S & F in repair chromium plated soap dish fixed to wall with CP screw complete all as specified and directed. |
| 129 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 130 | S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 131 | S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union. |
| 132 | S & F as in repair ABS body chromium plated shower rose 125 mm size with or without swivel joints, anysize, including fixing to steel pipe or union all as specified and directed. |
| 133 | S & F in repair 15mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed all as specified and as directed. |
| 134 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. |
| 135 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and as directed. |
| 136 | S & F in repair 100mm dia steel chromium plated gratings fixed on floor trap/Nahani trap with white cement complete all as specified and directed. |
| 137 | Supply & fix in repair brass chromium plated wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. |
| 138 | Supply & fix in repair brass chromium plated single lever mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete. |
| 139 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete. |
| 140 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 141 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 142 | S&F in repair PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 143 | S&Fin repair PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 144 | S & F in repair of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete. |
| 145 | S & F in repair of PVC (SWR) junction single, (Single T) 75 mm bore equal or unequal with acess door complete. |
| 146 | S & F in repair 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified and as directed. |
| 147 | M&L for damproofing to wall with two component Acrylic polymercementitious water proof elastomeric coating four grade mixto form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass meshcloth as first coat is still green with overlap of joint of fibremesh not less than 100mm,then finallyapply second layermix by brush to entire surfaceof container covering0.6-0.75Sqm/kg at 1mm thickin two coat dependingon the level of substrate and curing it for minimum 3 days. Note: Quated rate shall be deemed to be inclussive of materials and all laboiurs,tools and plants,scaffolding and working upto height 6m etc. |
| 148 | M&L for solar reflective coated thermoplastic heat resistant roofpaint 1mm thick made with advanced ceramic or acrylic compound complete all as specified by manufacturing instructions |
| 149 | S&F PVC in repairs waste pipe size 32/40 mm X 800 mm flexible with coupling for WHB/Urinal etc. complete all as specified and directed. Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
