|
| 1 | Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | M&L for 100mm thick PCC type C-2 1:3:6 using 40 mm graded agg in plinth protection path/ hardstanding/ drain bed/ jhura bed finished cement concrete surfaces fair and even including forming construction joint filled with CM 1:6 complete all as specified & as directed. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness laid dry or dry and pointed in floors, aprons etc complete all as specified and as directed. |
| 4 | M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster 1:4 complete all as specified and as directed. |
| 5 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed. |
| 6 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 7 | Demolition of brickwork or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc but exclusing ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and as directed. |
| 8 | M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including brought up to courses complete all as specified & as directed. |
| 9 | All as per item No 8 here-in-before but except stone complete all as specified and as directed..NOTE:- Stone boulders obtained from item No 07 here-in-before shall be reused. |
| 10 | M&L for rendering 15 mm thick in CM 1:4 on stone masonry , finished even & fair without using extra cement complete all as specified and as directed. |
| 11 | Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 12 | M&L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in walls etc complete all as specified and as directed. |
| 13 | M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & as directed. |
| 14 | M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping complete all as specified and as directed. |
| 15 | Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better in rough finished surfaces complete all as specified and directed. |
| 16 | Dismantling old PGI/CGI sheeting of any gauge thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed. |
| 17 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed. |
| 18 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed. |
| 19 | S&F in repairs for Hollow Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E165) complete all as specified and as directed. |
| 20 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamal paint over one coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
