|
| 1 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) (AR/GNIDA) |
| 2 | Shrubs (0.60mtr. Dia & 0.60mtr deep) |
| 3 | Trees (0.90mtr. Dia & 0.90mtr deep) |
| 4 | Supply & Planting of plants common varieties as required by engineer-in-charge in 8\\" X 12\\" sixe polythene bags or earthen pots well branched and fully foliage branching dia 0.50 to 0.75mtr., free from disease at site i/c stacking with bamboos and binding with sutli (not below then 6'-8' common varieties) (As per market rate) (Neem, Amaltas, Jamun, Pilkha, Papdi, Arjun, Cassia Semia etc.) (AR/GNIDA) |
| 5 | Supply of Neem oil cake pulverized and un-decorticated packed in bags (As per market rate) |
| 6 | Supply of Stemmed bone meal at site packed in bags. (As per Market rate) |
| 7 | Supply & planting of shrubs, plants height 2-2.5 feet as required by engineer in charge in 6'x8' polythene bags or earthen pot fully foliage and well branched free from disease (As per market rate )approved by GNIDA |
| 8 | Shrubs (Common variety) |
| 9 | Supply and stacking of well decayed cattle manure site including royalty and carriage up to 5 Km. lead completed, (Cattle manure measured in stacks with reduced by 8% for payment ) (AR/GNIDA) |
| 10 | Complete maintance of Shrubs in green belt (OUT SIDE garden features) (job like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc. (excluding the cost of material which shall be supplied by the department and other T&P material/article shall be provided by the contractor) and as per direction of officer in charge. (AR/GNIDA). |
| 11 | Providing and watering for irrigation through boring and RH Pipe in green belt of Horticulture features i.e. lawn, trees, shrubs, hedge/edge, ground cover etc. at the site of work i/c supply of water and RH Pipe for watering each plant and complete arrangement of watering with DG set boring pump and labour for watering at site with all leads and lifts as per direction of office in charge. (AR/GNIDA) |
| 12 | Shrubs |
| 13 | Complete maintenance of the entire Garden featured having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, ledge, flower, beds foliage creeper etc. including hoeing wedding, pruning, replacement of palnts gap filing, mowing of lawn, grass cutting by lawn moved and brush cutter, removal of garden waste, applying in secticide, pesticide & fertilizer, (Whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as per directed by officer in charge, (cost of good eawrth, manure, fertilizer, insecticide, pesticide will be provided by constractor) and as per direction officers in charge. (AR/GNIDA) |
| 14 | open lawn |
| 15 | Providing profuse watering arrangement for lawn/Park at site to make available for irrigation i.e. Diesel engine & Oil etc. RH Pipe/Canvas Pipe & other T&P and carriage Etc. complete. (As per Noida Authority Approved) |
| 16 | Supply of chloropyriphos 20% E.C./Lindan 20% E,C, FOR Anti-Termite treatment of plants@2ml/plant in the interval of 01month up to one year i.e.12times in a year hence it comes 0.24ml/per plant. As per market rate) |
| 17 | D/I/T/C tube well boring of 150mm dia including all material & Labour complete PVC boring pipe and stainer of make Finolex / Kisan /Supreme approved by engineering in charg eof boring 200 feet. (AR/GNIDA) |
| 18 | S/F Submersible motor pump CRI make of 3 HP fixing and all material and labour complete. (AR/GNIDA) |
| 19 | Excavation & back filling the trench for PVC Pipe line with all labour T&P etc. complete (size 1.00 x 0.45 x 0.9) as per UP PWD SOR rate. (AR/GNIDA) |
| 20 | P/F following size of finolex makes PVC pipes 6.0Kg/Cm2 with required PVC Standard special confirming to IS Codes with latest amendment and lowering the same tranches and laying true to alignment and gradient complete i/e the cost of cutting of pipes for making upto length and making joints i/c cost of socket, Plsiochem PV-85 PVR solvent cement complete PVC pipe must the confirming to IS : 4985-2000 with latest amendment make- Finolex/Kisan/supreme industries Ltd. (Rate as per comparative statement per Rm.) 90mm dia with coupler @6Kg/Cm2 pressure with i/e all PVC stanared specials (AR/GNIDA) |
| 21 | Providing and fixing hydrant with all complete. |
| 22 | Tractor with trolley including POL & driver. (SOR-20/S.No-19/Chapter-2) |
| 23 | Supply of labour. ( Based on SOR-20/SN-12/Chapter-2) |
| 24 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30cms. measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. Out side periphery of area cleared. (SOR-20/259(i)) |
| 25 | Same as above 259(i) above but grass only (SOR-20/259(a) (Out Side Green Belt) |
| 26 | Same as above 259(i) above but grass only (SOR-20/259(a) (In side Green Belt) |
| 27 | Supply of 360 degree rotating Automatic Garden Plastic Sprinkler with Metal Stand (G.I. Pipe), 2 Wheel, Dimensions (LxWxH) 50.8x48.26x73.66 cm, Weight 850g. The sprinkler shall be capable of both non recersing full circle and part circle opration in the same unit. manual rotation in any direction the sprinkler shall automatically return the water stream to its preset are. The are adjustment can be perform on both the right and left trip of the sprinkler. (AR/GNIDA) |
| 28 | Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.50 M and lead upto 30.00M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches (where machine con not reach/move) (SOR-20/251 (A)/4.1.1) |
| 29 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/279)Same as above item no 279 but in proportion of 6:3:1. (SOR-20/280) |
| 30 | Supplying at site :R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately). (DSR-18/16.15.1) |
| 31 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (DSR-18/16.18) |
| 32 | With G.I. barbed wire. (DSR-18/16.18.1) |
| 33 | White washing one coat including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work. (SOR-20/671/16.01) |
| 34 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 35 | M-150 brick work in 1:4 cement & fine sand 2.20 FM mortar in foundation and plinth including supply of all material labour and T&P etc required for proper completion of the work. (SOR-20/303) same as item no 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. (SOR-20/305)Same as item no 305 but in 1:4 one cement & four coarse sand of 2.20 F.M. mortar. (SOR-20/305(A)) |
| 36 | Supply & fixing of RCC Grill work (JALI) of approved patterm & make at site of work in cement concrete consisting of cement, approved coarse sand and 6mm. Nominal size stone grit in the proportion of 1:2:4 & reinforced with 6mm. Dia M.S. wire/bar including cutting & finishing with 1:3 cement & fine sand of 1.25 fineness modulus mortar including supply of all materials, labour, tools and plants etc, required for proper completion of the work but excluding plaster on jambs, sill & soffit of the opening, (1) 5.00cm. thick. (SOR-20/21.17/New Item) |
| 37 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-18/13.4.2) |
| 38 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/279)Same as above item no 279 but with 2cm gauge stone grit instead of 4cm gauge stone ballast. (SOR-20/279(a) |
| 39 | Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. (SOR-20/660)Same as item 660 but for weather coat (Asian or Berger Brand) (SOR-20/662/new item) |
| 40 | Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. paint to be used should confirm ISI no. 105/106/133-1950 (SOR-20/647/15.07) |
| 41 | As in item (647) above but for every subsequent coat on previously treated surface. (SOR-20/648) |
| 42 | Providing and laying 60mm Thick ISI mark factory made Cement Concrete interlocking paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required coloured of M-35 & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to ISI-15658 & IRC:SP:63 (DSR-18/16.68/GNIDA/AR) |
| 43 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
