Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Various civil construction works pertaining to feeder bays , augmentation of X-mer, addl. X-mer etc. and civil R and M works |
| 2 | 3011472 2.6(SOR w.e.f 01.01.2024) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 3 | 3011580 4.1.2.3(SOR w.e.f 01.01.2024) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate |
| 4 | 3011694 5.16.6(SOR w.e.f 01.01.2024) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 5 | 3011689 5.16.1(SOR w.e.f 01.01.2024) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . Mild steel and Medium Tensile steel bars.(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)Mild steel and Medium Tensile steel bars. |
| 6 | 3011642 5.9.1(SOR w.e.f 01.01.2024) Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 7 | 3011643 5.9.2.1(SOR w.e.f 01.01.2024) Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. |
| 8 | 3011633 5.1.1(SOR w.e.f 01.01.2024) Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete |
| 9 | 3011532 2.24(SOR w.e.f 01.01.2024) Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 10 | 3011536 2.27.1(SOR w.e.f 01.01.2024) Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) |
| 11 | 3000102, NSOR4 Supply , filling & compaction of Moorum with boulders / Copra with boulders below yard structure foundations in black cotton soil strata including cost of all material, labour, T&P, taxes, royalty, transportation, watering etc. complete as per direction of Engineer in charge. |
| 12 | 3012506 10.2 (SOR w.e.f 01.01.2024) Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 13 | 3012547 10.22.2 (SOR w.e.f 01.01.2024) Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 14 | 3000114, NSOR16 Labour only for fixing bolts of any length i/c weight of nuts & washers , etc. complete as per direction of Engineer in charge. |
| 15 | 3011777 6.5.2(SOR w.e.f 01.01.2024) Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement Mortar 1:6 (1 cement: 6 sand). |
| 16 | 3012505 10.1 (SOR w.e.f 01.01.2024) Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | 3013018 13.2.2(SOR w.e.f 01.01.2024) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand) |
| 18 | 3000106, NSOR8 Supply,stacking and spreading of 40mm crusher broken metal black trap, basalt or granite uniformly in substation yard in desired thickness, free from dust and foreign matter,including transportation up to site, lead and lift, T&P, labour,royalty and taxes etc. complete as directed by Engineer-in-charge. |
| 19 | 3011576 4.1.1.3(SOR w.e.f 01.01.2024) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 – Grade concrete |
| 20 | 3012739 11.66 (SOR w.e.f 01.01.2024) Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. |
| 21 | 3013851 18.7.1(SOR w.e.f 01.01.2024) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work..15 mm nominal outer dia .Pipes. |
| 22 | 3013852 18.7.2(SOR w.e.f 01.01.2024) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work..20 mm nominal outer dia .Pipes. |
| 23 | 3014046 18.12.1.1(SOR w.e.f 01.01.2024) Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end)..25 mm nominal bore |
| 24 | 3014048 18.12.1.3(SOR w.e.f 01.01.2024) Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end).40 mm nominal bore |
| 25 | 3014135 18.29.1(SOR w.e.f 01.01.2024) Providing and fixing brass bib cock of approved quality..15 mm nominal bore |
| 26 | 3011552 2.35(SOR w.e.f 01.01.2024) Earth work in rough excavation by any means and banking\filling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. |
| 27 | 3011473 2.7.1(SOR w.e.f 01.01.2024) Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock |
| 28 | 3011474 2.7.2(SOR w.e.f 01.01.2024)Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Hard rock (requiring blasting) |
| 29 | 3011475 2.7.3(SOR w.e.f 01.01.2024)Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Hard rock (blasting prohibited) |
| 30 | 3000100, NSOR2 Supplying and spreading in EHV Substation yard or road works with hard moorum/ hard copra having maximum dry desnsity not less than 2 MT per cum with stacking, boxing , including cost of material, T&P, Royalty, all lead & lift etc. complete in layers not exceeding 200 mm , as per specifications and direction of Engineer-in-Charge. but excluding compaction |
| 31 | 3011315, 1.1.1 2(SOR w.e.f 01.01.2024) Transportation By Mechanical Transport including loading, unloading and stacking. Lime, moorum, building rubbish 2 km |
| 32 | 3011317, 1.1.1.4 (SOR w.e.f 01.01.2024) Transportation By Mechanical Transport including loading, unloading and stacking. Lime, moorum, building rubbish 4 km |
| 33 | 3000108, NSOR10 Compaction of moorum /earth by using SRR/DRR including hire & running expenses of roller, cost of water, T&P, labour, transportation, taxes etc. complete as directed by Engineer in charge. |
| 34 | 3000118, NSOR20 22 cm thick grouted stone pitching (without quarry spall) with individual stones of 22 cm depth and minimum size 0.014 cum in cement mortar 1:6 complete as per direction of Engineer-in-charge |
| 35 | 3011584, 4.2.1.2 (SOR w.e.f 01.01.2024) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M 20 – Grade concrete |
| 36 | 3013112, 13.64(SOR w.e.f 01.01.2024) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 37 | 3012546, 10.22.1 (SOR w.e.f 01.01.2024) Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. |
| 38 | 3000146,NSOR41 Providing & Fixing 100 mm dia AC/PVC pipe with grating for weep holes in Brick masonary/ Plain/Reinforement cement concrete abutments , wing walls, retaining walls etc. extending through the full width of abutments , wing walls, retaining walls etc.with a slope of 1H: 20V including cost of all material, labour, T&P etc. complete as directed by Engineer in charge. |
| 39 | 3000137,34 NSOR Supply, stacking, spreading and hand packing for road works, 80mm over size metal black trap, basalt or granite free from dust & foreign materials including all lead and lift, stacking, boxing, labour charges, T&P,transportation from approved quarry or crusher to site, royalty charges etc. complete as per direction of Engineer-in-charge. |
| 40 | 3000109, NSOR11 Consolidation of oversize metal by SRR / DRR with spreading of Moorum including hire & running expenses of roller with cost of water, T&P, Labour, transportation, taxes etc. complete, |
| 41 | 3000140, NSOR37 Providing & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 including cost of all material, labour, T&P, taxes, transportation etc. complete as directed by Engineer in charge |
| 42 | 3011589, 4.3.1(SOR w.e.f 01.01.2024) Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. |
| 43 | 3011577, 4.1.1.4 Providing & Laying CC excluding cost of centering & shuttering with 20 mm aggregate M-10 grade |
| 44 | 3013089, 13.50 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade. New work ( Two or more coats applied @ 3.84kg/10sqm). |
| 45 | 3011537, 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. |
| 46 | 3012548, 10.23.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying a priming coat of approved steel primer. MS tube |
| 47 | 3000151,46NSOR Dismentling of chainlink mesh fencing which include taking out the mesh from the posts including barbed wire and lower & Upper Runner Angles if any, i/c stacking , rolling the mesh and keeping all taken out material at specified place in desired pattern including all labour , T&P, taxes etc as per direction of Engineer in Charge |
| 48 | 3000143, 39bNSOR \\"\\"Providing and laying in position Reinforced Cement Concrete NP 3 class / prestressed concrete hume pipe for culverts on first class bedding of granular material in single or double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling , concrete & masonary works in headwalls , parapets, , abutments, etc. but including cost of pipes, collars, cement mortar for jointing , placing in position, labour, transportation, etc complete as per direction of Engineer-in-charge.(c) Pipe Diameter 1000mm\\" |
| 49 | General Repairing and maintanance in susbtation premises under jurisdiction of EHT-C dn. Balaghat, 3006506,15.48(SOR w.e.f 01.01.2024),Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 50 | 3006211,13.46(SOR w.e.f 01.01.2024),Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 51 | 3006355,14.51.1(SOR w.e.f 01.01.2024),Finishing walls with Acrylic Smooth exterior paint of required shade :.Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 52 | 3006206,13.41(SOR w.e.f 01.01.2024),Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 53 | 3006241,13.65(SOR w.e.f 01.01.2024),Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 54 | 3004833,4.1.1.2(SOR w.e.f 01.01.2024),Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-20 – Grade concrete |
| 55 | 3006285,14.5.1(SOR w.e.f 01.01.2024),Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
| 56 | 3006325,14.30(SOR w.e.f 01.01.2024),Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 57 | 3006282,14.2.3(SOR w.e.f 01.01.2024),Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Clerestory window chowkhats |
| 58 | 3006795,17.58.1(SOR w.e.f 01.01.2024),Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm)..75 mm diameter |
| 59 | 3006796,17.58.2(SOR w.e.f 01.01.2024),Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm)..110 mm diameter |
| 60 | 3007319,19.9.1.1(SOR w.e.f 01.01.2024),\\"Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks\\" |
| 61 | 3005145,9.1.2 (SOR w.e.f 01.01.2024),Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 62 | 3005718,10.27.1 (SOR w.e.f 01.01.2024),Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes |
| 63 | 3000163,56a NSOR,Wiring for the following light points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia 2 mm thick rigid PVC pipe of approved make i/c switches, lamp holder, Ceiling rose (Anchor, Havells or equivalent make) , GI Box/ wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. short point upto 3 m |
| 64 | 3000164,56b NSOR,Wiring for the following light points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia 2 mm thick rigid PVC pipe of approved make i/c switches, lamp holder, Ceiling rose (Anchor, Havells or equivalent make) , GI Box/ wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. Medium point 3 to 6 metres |
| 65 | 3000165,56c NSOR,Wiring for the following light points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia 2 mm thick rigid PVC pipe of approved make i/c switches, lamp holder, Ceiling rose (Anchor, Havells or equivalent make) , GI Box/ wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. Long point 6 to 10 metres |
| 66 | 3000168,58b NSOR,Wiring for the fan/ exhaust fan / call bell points with 1.5 Sq. mm PVC insulated copper conductor ( Finolex, Havells, Anchor or equivalent) 650 Volts grade standard wire in concealed 25 mm dia, 2 mm thick rigid PVC pipe of approved make i/c switches, , Ceiling rose (Anchor, Havells or equivalent make) , GI / wooden box and all other required fittings & fixtures of approved make including providing 5 Amp grid plate (Anchor, Havells or equivalent ) complete. The work include cost of all material, T&P, tax, transportation etc., labour, making grooves and after the work done, to make the wall & other structural components good to the desired finish complete as per direction of Engineer in charge. Medium point 3 to 6 metres |
| 67 | 3000172,59b NSOR,\\"Point wiring for 3 pin, 15 Amp Socket outlet point with 15 Amp Switch on separte board with 4 Sq. mm PVC insullated copper conductor of Havells, Anchor or equivelant make and all other required fittings and fixtures of Anchor, Havells or equivelant make in 25 mm dia rigid PVC conduit 2 mm thick of approved make including 2 mm bare copper earth continuity conductor with all cost of material , tax, transportation etc., T&P, labour and making grooves & making the same good in smooth finish as directed by Engineer in charge.Medium Point (3 m to 6m )\\" |
| 68 | 3000178,62b NSOR,\\"Wiring for circuit wiring with PVC insulated copper conductor of Finolex, Havells, Anchor or equivelant make in rigid PVC Conduit 25 mm dia 2 mm thick of approved make with bare copper earth conductor of suitable size and all other required fittings of approved make including cost of all material, T&P, taxes, transportation etc., labour and making good the surfaces to the smooth finish after completion of the work as per direction of Engineer in charge.2x 2.5 Sqmm\\" |
| 69 | 3000179,62c NSOR,\\"Wiring for circuit wiring with PVC insulated copper conductor of Finolex, Havells, Anchor or equivelant make in rigid PVC Conduit 25 mm dia 2 mm thick of approved make with bare copper earth conductor of suitable size and all other required fittings of approved make including cost of all material, T&P, taxes, transportation etc., labour and making good the surfaces to the smooth finish after completion of the work as per direction of Engineer in charge.2x4 Sqmm\\" |
| 70 | 3000181,64 NSOR,Providing & Fixing earthing arrangement with 600x600x3.15 mm copper plate electrode including packing of charcoal powder and salt as per specification,water pipe 19 mm dia G.I.connections, etc. complete with excavation & refilling the pit with material as required, etc. with cost of all material, labour, T&P, taxes, transportation etc. complete as per direction of Engineer in charge. |
| 71 | 3000182,65a NSOR,\\"Supply & fixing Miniature circuit breakers of Havells, Anchor, Crompton or equivelant make and accepted standard suitable for 240/415 volts 50 cycle, A.C. supply but without enclosures.Triple pole 6 amp to 16 amp rating\\" |
| 72 | 3000188,65g NSOR,\\"Supply & fixing Miniature circuit breakers of Havells, Anchor, Crompton or equivelant make and accepted standard suitable for 240/415 volts 50 cycle, A.C. supply but without enclosures.Single pole & Neutral 6 amp to 16 amp rating\\" |
| 73 | 3000191,66b NSOR,\\"Supply & fixing accepted standard steel sheet enclosures of Havells, Anchor, Crompton or equivelant make ( dust protected) for SPN Distribution Boards including Bus Bar, Neutral Link, din bar suitable for incorporating MCB surface / Flush mounting type including cost of all material, labour, taxes, transportation etc. complete.From 6 to 8 MCB per pole\\" |
| 74 | 3007474,21.1.2.2(SOR w.e.f 01.01.2024),Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 75 | 3006034,12.32.2(SOR w.e.f 01.01.2024),Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter (minimum wall thickness 2.2mm) |
| 76 | 3006442,15.6.3(SOR w.e.f 01.10.2024),Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge...In cement mortar. |
| 77 | 3006596,17.1.1(SOR w.e.f 01.01.2024),Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :..White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 78 | 3006621,17.11.3(SOR w.e.f 01.01.2024),Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 79 | 3006917,18.6.1.1(SOR w.e.f 01.01.2024),Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Internal work - Exposed on wall..15 mm nominal outer dia .Pipes. |
| 80 | 3006919,18.6.1.3(SOR w.e.f 01.01.2024),Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge...Internal work - Exposed on wall..25 mm nominal outer dia.Pipes. |
| 81 | 3007210,18.28(SOR w.e.f 01.01.2024),Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 82 | 3007211,18.29.1(SOR w.e.f 01.01.2024),Providing and fixing brass bib cock of approved quality..15 mm nominal bore |
| 83 | 3007132,18.13.1(SOR w.e.f 01.01.2024),Providing and fixing CPVC gate valve with knob of approved quality...25 mm nominal bore |
| 84 | 3007133,18.13.2(SOR w.e.f 01.01.2024),Providing and fixing CPVC gate valve with knob of approved quality.32 mm nominal bore. |
| 85 | 3007134,18.13.3(SOR w.e.f 01.01.2024),Providing and fixing CPVC gate valve with knob of approved quality.40 mm nominal bore |
| 86 | 3007135,18.13.4(SOR w.e.f 01.01.2024),Providing and fixing CPVC gate valve with knob of approved quality.50 mm nominal bore |
| 87 | 3007240,18.48.1.1(SOR w.e.f 01.01.2024),Providing and fixing PTMT grating of approved quality and colour...Circular type...100 mm nominal dia. |
| 88 | 3007292,19.4.2(SOR w.e.f 01.01.2024),Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly...160 mm diameter OD (min. wall thickness 4.0mm) |
| 89 | 3003667,NSOR,Providing fabricating & fixing in position ready made septic tank of size of 90cmx60cmx2.00m size with RCC covers for 60 user daily i/c soak pit pipe, necessary excavation in all types of soil, embedding with 1:3:6 C.C. of thickness 150 mm transportation up to site, making connection with other accessories such as oulet pipes, i/c all materials, all necessary fittings like tee, bend pipe, cowl, etc. back filling complete as per instruction of Engineer-in-charge (Base Rate Rs 11000/- each) |
| 90 | 3011961,,9.5.2.1 (SOR w.e.f 01.01.2024) \\"Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge...Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood...35 mm thick shutters..\\" |
| 91 | 3011968,,9.6.2 (SOR w.e.f 01.01.2024) \\"Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:..Kiln seasoned and chemically treated Haldu, Kail, Bija wood\\" |
| 92 | 3005920,11.78.1.1 (SOR w.e.f 01.01.2024),Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm |
| 93 | 3005926,11. 79.1.1 (SOR w.e.f 01.01.2024),Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm |
| 94 | 3005875,11.50(SOR w.e.f 01.01.2024),Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. |
| 95 | 3005874,11.49(SOR w.e.f 01.01.2024),Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 96 | 3004852,4.5(SOR w.e.f 01.01.2024),Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 sand) including the cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. (With 20mm nominal size graded stone aggregate) |
| 97 | 3005885, 11.60.1 (SOR wef. 01.01.2024) Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. |
| 98 | 3005886, 11.60.2 (SOR wef. 01.01.2024) Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1acid proof cement: 4 sand).Acid and alkali resistant tile. |
| 99 | 3005852,11.34 (SOR w.e.f 01.12.2024),Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. |
| 100 | 3006375,14.64(SOR w.e.f 01.01.2024),Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. |
| 101 | 3006539,15.64(SOR w.e.f 01.01.2024),Disposal of building rubbish/malba /similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 102 | 3000107,9 NSOR,Watering only for moorum/ earth compaction including cost of water , transportation, T&P, labour, taxes, etc. complete (For road and other similar works) |
| 103 | 3000116,18 NSOR,22 cm thick dry stone pitching (without quarry spall) with individual stones of 22 cm depth and minimum size 0.014 cum complete as per direction of Engineer-in-charge |
| 104 | 3000119,21 NSOR,Removal & refixing of flagstone flooring , the work is inclusive of taking out of existing flagstone carefully and stacking the same properly at suitable location i/c cleaning of site by removal & disposal of unwanted material etc. , levelling and dressing of existing yard , supplying, spreding hard moorum i/c watering and ramming in 150 mm avarage thickness, laying of flagstone, fixing in position over moorum bed i/c cutting and setting, pointing in CM 1:3, striking joints, curing and cleaning etc. , complete as per direction of Engineer in Charge. The rate are inclusive of cost of all material, T&P, consumables, labour, transportation, all lead and lift, royalty charges, taxes etc complete but excluding cost of flagstone as same will be obtained from existing flagstone flooring. |
| 105 | 3000137,34 NSOR,Supply, stacking, spreading and hand packing for road works, 80mm over size metal black trap, basalt or granite free from dust & foreign materials including all lead and lift, stacking, boxing, labour charges, T&P,transportation from approved quarry or crusher to site, royalty charges etc. complete as per direction of Engineer-in-charge. |
| 106 | 3000138,35 NSOR,Supply and stacking at site 40mm metal (for Road works ) crusher broken black trap, basalt or granite free from dust & foreign materials, including transportation, lead & lift, royalty,taxes etc. complete as directed by Engineer-in-charge. |
| 107 | 3000139,36 NSOR,80 mm thick WBM coat in wet season by SRR /DRR including spreading of Metal & Moorum, watering, Korebandi ( 40 mm metal), including hire & running expanses of roller complete |
| 108 | 3000140,37 NSOR,Providing & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 including cost of all material, labour, T&P, taxes, transportation etc. complete as directed by Engineer in charge |
| 109 | 3000144,39c NSOR,\\"Providing and laying in position Reinforced Cement Concrete NP 3 class / prestressed concrete hume pipe for culverts on first class bedding of granular material in single or double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling , concrete & masonary works in headwalls , parapets, , abutments, etc. but including cost of pipes, collars, cement mortar for jointing , placing in position, labour, transportation, etc complete as per direction of Engineer-in-charge.(d) Pipe Diameter 1200mm\\" |
| 110 | 3000146,41 NSOR,Providing & Fixing 100 mm dia AC/PVC pipe with grating for weep holes in Brick masonary/ Plain/Reinforement cement concrete abutments , wing walls, retaining walls etc. extending through the full width of abutments , wing walls, retaining walls etc.with a slope of 1H: 20V including cost of all material, labour, T&P etc. complete as directed by Engineer in charge. |
| 111 | 3000148,43 NSOR,P/F 2400 mm high chain link mesh 75x75 mm square size of GI wire 4 mm dia conforming to IS specification 2771-1981 including all necessary arrangment for fixing the same to angle iron post such as hooks, cleats, washers, upper & lower runner GI wire with cost of chain link mesh and all other fixtures complete as per Drawing No.T&D/DRG./MISC./2/R3 and direction of Engineer- in- Charge. |
| 112 | 3000149,44 NSOR,Providing & Fixing precast RCC post M-20 strength of section 100mmx100mm casted with 4 Nos.6 mm dia MS bars and stirrups placed 300 mm C/c , 1.85 M long placed at 2 M C/c , corner and every tenth post to be strainer post and strutted with struts (struts , strainer post & main post all of same size) , excavation of pit in all type of strata and pit size 30cmx30cmx60 Cm and grouting the posts in Cement Concrete 1:3:6 laid in the pit , providing & fixing 6 horizontal rows and 2 diagonals of barbed wire ( 9.38 Kg per Metre) to concrete posts and tied up suitably with GI wire & staple pins of 6 mm dia MS Bars embedded in posts , complete as per approved drawing & direction of Engineer in charge including cost of all material , labour , T&P, transportation etc. complete as per Drawing No. TRN/ST/168 |
| 113 | 3000150,45 NSOR,P&F Barbed wire (9.38 Kg per 100 M min.) to MS Angle Iron posts including screwing with GI tying wire staples or steel pins I/c cost of wire, staples pins etc. as per the direction of Engineer-In- Charge |
| 114 | 3000145, 40 NSOR, Brickwork in plinth & foundation of Boundary wall with fly ash lime bricks (FALG bricks) having 75 Kg per sq cm average compressive strength conforming to IS:12894-2002, in cement mortar 1:6 , including cost of all material, labour, T&P, taxes, transportation ,curing etc. complete as perdirection of Engineer in charge. |
| 115 | 3000152,47 NSOR,Taking out RCC Posts of Yard fencing from the embedded pits or piles by excavating the pit or exposing the piles and then separating it from the concrete mass through chieseling , hammering or any other suitable safe method so that the post remains intact and then stacking it at desired place including all labour , T&P, taxes etc as per direction of Engineer in Charge |
| 116 | 3000153,48 NSOR,Taking out MS Angle Posts of Yard fencing from the embedded pits or piles by excavating the pit or exposing the piles and then separating it from the concrete mass through chieseling , hammering or any other suitable safe method so that the post remains intact and then stacking it at desired place including all labour , T&P, taxes etc as per direction of Engineer in Charge |
| 117 | 3000154,49 NSOR,Labour only for fixing of chain link mesh fencing in position on angle iron with nuts, bolts, washer including grouting of post if required including cost of nuts,bolts, flat washers of size 100 x 30 x 3mm as required but excluding cost of other material as per direction of Engineer-in-Charge. |
| 118 | 3000155,50 NSOR,Labour only for steel work in single section for RS joist complete as per direction of Engineeer in charge |
| 119 | 3000156,51 NSOR,Labour only for fixing MS angle post in cement concrete complete as per direction of Engineeer in charge |
| 120 | 3011304, NSOR 288, Providing and fixing prestresed vertically casted concrete panels ( Both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2200X300X50 mm having minimum 4 numbers of high tensile steel wire as per IS 6006-2014 of dia 3mm placed horizontaly in full lenght of panel with prestressed precast concrete coloumn of M-40 grade of size 3200X200X200 mm having minimum 8 numbers of high tensile steel wire as per IS 6006-2014 of dia 3mm placed vertically in full lenght to erect precast bouandary wall panels to height 2400mm from GL incl. excavation of pit of size 600mm dia X 1200 mm deep for ordinary soil and 600 mm dia X 850mm deep for hard rock strata for erection of coloumns and grouting the pit with M-20 grade of concrete,Manufactuiring, Transportation and Installation at site all complete as per the direction of engineer in charge. Along with providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 meter openable lenght ( Total lenght 90 meter), having 50 No. rounds per 6 meter lenght, upto 3 meter height of wall with angle MS 65X65X6 mm iron 'Y' saved run welded with to numbers 12mm dia tor steel rod embedded in coloumn, as per drawing and with 6 number horizontal R.B.T reinforced barbed wire, stud tied with GI staples and GI clips to retain horizontal, including necessary bolds aur GI barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape (R.B.T) / spring core (2.5mm thick) and weight 43.478 gm per meter. Complete as per drawing number TRM/ ST/440- RI dtd. 04.07.2024 and TRN/ST/459 dtd. 22.01.2025 (or its subsiquent revision) and providing test results of all components and material used, tested from any NABL lab, incl. all transportation upto site complete job. |
| 121 | 3011274, 285 NSOR, \\"Providing and laying mixture of stone crusher dust (free form organic matters and foreign matters etc.) and Cement in a ratio of 1:10 (1Part Cement :10 part stone crusher dust by volume) of minimum thickness of 100mm and with provision of ground water recharging holes of 100 mm dia and at 3000 mm c/c or at suitable intervals as per site requirement in zigzag pattern with the help of fixing 100 mm dia PVC pipes, including cost of pipes, preparation of surface, mixing of stone crusher dust and cement in concrete mixer with desired water cement ratio, laying, vibration, compaction, curing etc. complete to give a perfect cohesive, smooth and even surface, finishing as per requirement, cleaning, etc, complete and also inclusive of all leads and lifts and cost of all materials, transportation, royalty charges (it any) taxes, levies, labour charges, T&P and cost of other consumables etc. all complete and as per direction of Engineer-In-Charge Note :- 1) This items shall not be executed in case of hard strata i.e. hard rock, soft rock, ordinary rock etc if exists on surface of substation yards. 2) The quantity of stone crusher dust shall be measured in volumetric terms so as to exercise cross check. \\" |
| 122 | 15.13, Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 123 | 14.60, 3006370, Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of sand, filling the joints with sand etc all complete as per direction of Engineer-in-charge. (old CC paver blocks shall be supplied by the department free of cost). |
| 124 | 15.53, Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. |
| 125 | 15.3, Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in.Charg |
| 126 | 3011274, 285 NSOR, \\"Providing and laying mixture of stone crusher dust (free form organic matters and foreign matters etc.) and Cement in a ratio of 1:10 (1Part Cement :10 part stone crusher dust by volume) of minimum thickness of 100mm and with provision of ground water recharging holes of 100 mm dia and at 3000 mm c/c or at suitable intervals as per site requirement in zigzag pattern with the help of fixing 100 mm dia PVC pipes, including cost of pipes, preparation of surface, mixing of stone crusher dust and cement in concrete mixer with desired water cement ratio, laying, vibration, compaction, curing etc. complete to give a perfect cohesive, smooth and even surface, finishing as per requirement, cleaning, etc, complete and also inclusive of all leads and lifts and cost of all materials, transportation, royalty charges (it any) taxes, levies, labour charges, T&P and cost of other consumables etc. all complete and as per direction of Engineer-In-Charge Note :- 1) This items shall not be executed in case of hard strata i.e. hard rock, soft rock, ordinary rock etc if exists on surface of substation yards. 2) The quantity of stone crusher dust shall be measured in volumetric terms so as to exercise cross check. \\" |
| 127 | 1000557, NOSR Payment of fixed additional charges for Mobilization of men, materials, T&P etc. due to change in location of work from one substation/premises to another substation/premises after 1st sub order for each separate sub-order (s) under the scope of same contract of civil works shall be payable as per following conditions: -(i) Applicable only after 1st sub work order and only on change in work location from one substation/premises to another substation or any other MPPTCL’s premises situated at a distance of more than 3.00 Kms. for execution of work under the same main contract. (Nearest motorable road distance shall be considered for this purpose) (ii) The distance as mentioned in point no. – (i) shall be considered from the nearest current location of ongoing work (where the work shall be in progress by the contractor at the time of placing new sub-order irrespective of scheduled completion period given for that work) under the scope of same contract. (iii) Not applicable for the balance work (when the sub order of any civil work is placed in two or more parts) of dusting, metaling etc. on the same feeder bay work for which the work of foundation etc. has been executed previously under the scope of same contract.(iv) The rates are inclusive of cost of transportation of labour, material, T&P etc. and cost of all respective works in all respect up to any distance in the area of jurisdiction of main work order for the contract and also in nearby areas as per necessity i/c all applicable taxes (except GST) etc. all complete, as per terms and conditions of order and as per direction of Engineer – In – Charge.(Base Rate: - Rs. 10,000/- per shifting) Note:- This payment of fixed additional charges for changing of work location shall be payable only when work will be executed in accordance with location wise priority fixed by the Engineer-In-Charge (if any) and only on successful completion of work in all respect as per scope of work in the sub-order for which said additional charges are to be payable. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
