|
| 1 | PROCUREMENT OF DIFFERENT TYPES OF HT BOTLS, NUTS, WASHERS, STUDS ETC TO BE USED FOR UNIT-4 OVERHAULING, SGTPP |
| 2 | ALLEN BOLT,HT,M10X45,GRADE 10.9 ( FULL THREAD: M10X50MM, 10.9 APPLICATION: FOR RETAINER OF STOP BOLT OF BOWL MILL XRP1003 MAKE: TVS/UNBRAKO/CAPARO ) |
| 3 | SCREW,SOCKET HD CAP,M16X60 FT,HT 12.9 FOR MILL XRP1003 ( APPLICATION:FOR FITTING THE BOWL HUB COVER OF MILL XRP1003 MAKE: TVS/UNBRAKO/CAPARO ) |
| 4 | BOLT,HEX HD,M16X40,FT,GR 10.9,SP WASHER ( WITH PLAIN WASHER (NO SPRING WASHER), GR.10.9 APPLICATION: FOR FITTING RJ GUARD ASSEMLY OF MILL XRP1003+APH MAKE: TVS/UNBRAKO/CAPARO ) |
| 5 | BOLT, SOC HD, M24 X 90 FT GRADE 12.9 HT FOR CLAMPING RING OF COAL MILL XRP 1003 ( APPLICATION: FOR FASTENING THE CLAMING RING OF MILL XRP 1003 MAKE: TVS/UNBRAKO/CAPARO IT MAY BE FULL THREAD OR MAY BE 65MM THREADED AND 25MM UNTHREADED IN LIEU FT ) |
| 6 | HT HEX HEAD BOLTS,M24X110,GRADE-12.9 # HT HEX HEAD BOLTS SIZE: M24X110 GRADE-12.9 AS PER IS:1367 FULL THREAD ( APPLICATION: FOR FASTENING NOZZLE RING WITH BOWL HUB THROUGH EXTENSION RING OF MILL XRP1003. MAKE: TVS/CAPARO/UNBRAKO ) |
| 7 | BOLT HT M20X80 HEX HEAD FULL THREAD GRADE.10.9 ( WITH PLAIN WASHER (10.9) APPLICATION: FOR BOLTING UPPER SKIP LINER AND LOWER SKIP LINER OF MILL XRP 1003 MAKE: TVS/UNBRAKO/CAPARO ) |
| 8 | HT BOLT, HEX HEAD, M12 X 60MM FT FOR GR 10.9, WITH HT NUT & WASHER ( APPLICATION: FOR UPPER SEAL RING OF MILL XRP1003, APH DOOR , HOT PA DUCT DOOR, ID FAN INSPECTION DOOR, HOT SPOOL OF APH MAKE: TVS/UNBRAKO/CAPARO ) |
| 9 | bolt,HT hex head, M10X50 full thread,grade 10.9 ( BOLT, HT HEX HEAD, M10X65 FULL THREAD, GRADE 10.9 WITH NUT (10.9) APPLICATION: USED FOR LOWER SEAL RING OF MILL XRP1003 & APH DOOR MAKE: TVS/UNBRAKO/CAPARO ) |
| 10 | BOLT,MS,HEX HEAD,FULL THREAD,M12X40 ( WITH NUT AND WASHER APPLICATION:FEEDER POCKET DOOR, MILL OIL CHECKING DOOR, MRHS BIG DOOR MAKE: TVS/UNBRAKO/CAPARO/ OTHERS ) |
| 11 | HT BOLT, HEX HD, M12 X 40MM FT, GR 10.9, ( APPLICATION: LABYRINTH SEAL OF MILL XRP1003 MAKE: TVS/UNBRAKO/CAPARO ) |
| 12 | HT BOLT,HEX HD,M12X50MM FT,GR 10.9 # W/NUT GR-8 & MS WASHER ( WITH NUT (Gr.10.9) AND WASHER (Gr.10.9) APPLICATION:FOR BELLOW OF PA FAN, FD FAN OF STAGE-2, APH LOP FLANGE, APH DOOR OF STAGE-2 MAKE: TVS/UNBRAKO/CAPARO ) |
| 13 | FASTENER BOLT M12X100 HEX HEAD FULL THREAD ( WITH NUT(Gr.10.9), BOLT: Gr 10.9, FULL THREAD APPLICATION: FOR MDV LOCKING, APH MAIN MOTOR BASE MAKE:TVS/UNBRAKO/CAPARO ) |
| 14 | BOLT,ALLEN HD,M16X50,FT,GR 10.9 ( WITH WASHER(Gr.10.9) APPLICATION: FOR FITTING SEALING RING WITH JOURNAL HEAD MAKE: TVS/UNBRAKO/CAPARO ) |
| 15 | HTBOLT,HEXHEAD,M20X120MMFT,GR10.9W/HTNUT # ( IT WILL BE M20X130. WITH NUT AND WASHER, GR.10.9 APPLICATION: FOR PV1, PV3, PV4 OF MRHS MAKE: TVS/UNBRAKO/CAPARO ) |
| 16 | BOLT,HEX HEAD HT,M18X50 FT PROPERTY CLASS-10.9,IS:1364 ( IT WILL BE M18X30 BOLT:M18X30 MM WITH WASHER, GR.12.9 APPLICATION:FOR CONNECTING KNIFE GUIDE WITH HOUSING OF PV1, PV3, PV4 IN MRHS MAKE: TVS/UNBRAKO/CAPARO ) |
| 17 | BOLTS,NUT AND WASHER,M20X60,GRADE-10.9 # BOLT WITH NUT HT HEX HEAD BOLTS ALONG WITH NUT AND WASHER SIZE: M20X60 GRADE-10.9 AS PER IS:1367 FULL THREAD ( APPLICATION: FOR PV1 OF MRHS MAKE: TVS/UNBRAKO/CAPARO ) |
| 18 | HT BOLT M20X70 HEX HEAD,GRADE 10.9 FULL THREAD ( WITH WASHER (GR.10.9) and nut APPLICATION: FOR MDV DOOR BOX UP OF MILL XRP1003/MPO BASE BOLT MAKE: TVS/UNBRAKO/CAPARO ) |
| 19 | HT BOLT M6X60 HEX HEAD,GRADE 10.9 FULL THREAD ( APPLICATION: MAKING FIXTURES FOR ALIGNMENT MAKE: TVS/UNBRAKO/CAPARO ) |
| 20 | HEX NUT M6 # ( GRADE. 10.9, APPLICATION: MAKING FIXTURES FOR ALIGNMENT MAKE: TVS/UNBRAKO/CAPARO ) |
| 21 | HEXHEAD FT BOLT+NUT-MS-GRAD4. M16X60 # ( IT WILL BE M 16X 75, GR. 4.6 WITH PLAIN MS WASHER AND NUT APPLICATION: AT FLANGE OF COAL CONVEYING LINE OF MRHS. MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 22 | NUT & BOLT,M16X75,FT,MS & WASHER # ( IT WILL BE M 16X80 WITH NUT AND PLAIN WASHER, GR. 4.6 APPLICATION: AT FLANGE OF COAL CONVEYING LINE OF MRHS. MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 23 | BOLTS,NUT AND WASHER,M10X40,GRADE-10.9 # HT HEX HEAD BOLTS ALONG WITH NUT AND WASHER SIZE: M10X40 GRADE-10.9 AS PER IS:1367 FULL THREAD ( M10X40 WITH NUT & WASHER . GR. OF B+N+W IS 8.8 APPLICATION:FOR MOUNTING SCANNER HOSE, OIL GUN HOSE AND IGNITOR HOSE MAKE:TVS/UNBRAKO/CAPARO ) |
| 24 | STUD,M16X70, FT,GR 10.9,HT, W/2 HEX NUT AS PER IS:1862, HT STUD WITH TWO NOS HEAVY HEX NUTS, METRIC COARSE, FULL THREAD. BOLT GRADE: 10.9, NUT GRADE: 10.0, BOLT CONFORMING TO ASTM A193 / GRADE B7, NUT CONFORMING TO ASTM A194 / GRADE 2H. ( STUD 16X70MM, FT, WITH TWO NUTS, GR.10.9 APPLICATION:FOR FASTENING THE COAL NOZZLE OF BHEL 500 MW MAKE: TVS/UNBRAKO/CAPARO/OTHERS IN CASE OF STUD MAKE: TVS/UNBRAKO/CAPARO IN CASE OF NUTS ) |
| 25 | H.T BOLTS HEX HEAD (F.T),SIZE:M-24X65 MM ( APPLICATION:CCP OUTLET GATE NEAR COAL NOZZLE OF BHEL 500 MW MAKE: TVS/UNBRAKO/CAPARO ) |
| 26 | BOLT,HEX,HT,FT,M24X50,CLASS:10.9 IS:1364 ( APPLICATION:CCP OUTLET GATE NEAR COAL NOZZLE OF BHEL 500 MW MAKE: TVS/UNBRAKO/CAPARO ) |
| 27 | BOLT,HEX HEAD,HT,M24X200 PT PROPERTY CLASS-10.9,IS:1364 ( APPLICATION:CCP OUTLET GATE NEAR COAL NOZZLE OF BHEL 500 MW MAKE: TVS/UNBRAKO/CAPARO ) |
| 28 | HEX NUT M24 # ( APPLICATION:FOR M24 BOLT AT CCP OUTLET GATE NEAR COAL NOZZLE OF BHEL 500 MW MAKE: TVS/UNBRAKO/CAPARO ) |
| 29 | PLAIN HT WASHER,M30 ( WASHER SIZE:ID:37MM, OD:66MM, THICKNESS:5MM HT,GR.10.9 APPLICATION: AT BURNER TILTING LEVER OF 500MW BHEL BOILER MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 30 | HEX HEAD BOLT M20X200 WITH NUT # GRADE:10.9 ( BOLT M20X200 WITH DOUBLE NUTS, GR.12.9, FT APPLICATION:CONNECTION BETWEEN PIVOT PIN AND NOZZLE REACH ROD OF 500 MW BHEL BOILER. MAKE: TVS/UNBRAKO/CAPARO ) |
| 31 | WASHER, PLAIN, HT, M20, FOR BOLT GR 10.9 FIT TO M20 HT BOLT GRADE 10.9, SPECIFICATION: AS PER IS : 2016, HARDNESS: CONFORMING TO 300 HV MINIMUM, HARDENED WASHER ( APPLICATIN: FOR FIXING REACH ROD OF 500 MW BHEL BOILER+ MILL AREA. MAKE: TVS/UNBRAKO/CAPARO, GR. 12.9 ) |
| 32 | BOLT,HT,HEX HD,M12X40,FT,GR 8.8 ( WITH FOUR NUTS & DOUBLE WASHERS, GR.8.8 APPLICATION: REACH DOOR OF 500MW BHEL BOILER MAKE: TVS/UNBRAKO/CAPARO ) |
| 33 | NUT & BOLT,M16X35,FT,GR 10.9,SP WASHER # ( IT WILL BE M16X40 FT,GR 10.9 WITH DOUBLE NUTS AND PLAIN WASHER APPLICATION:RADIAL AND AXIAL SEAL OF PAPH, BYPASS SEAL OF SAPH MAKE: TVS/UNBRAKO/CAPARO ) |
| 34 | FASTENER STUD BOLT,HT,M12X60 FULL THREAD,WITH 1 NUT,GRADE 10.9 ( APPLICATION:HOT SPOOL OF PAPH & SAPH MAKE: TVS/UNBRAKO/CAPARO/OTHERS IN CASE OF STUD MAKE: TVS/UNBRAKO/CAPARO IN CASE OF NUT ) |
| 35 | Bolt with Nut,HT Hex Head ,Size: M16x45 Bolts along with Nut & Washer,Grade-10.9 as per IS:1367,Full Thread ( APPLICATION: BYPASS SEAL OF PAPH MAKE: TVS/UNBRAKO/CAPARO ) |
| 36 | FASTENER HT BOLT M16X50 FULL THREAD GRADE 10.9 ( WITH HT NUT, GR.10.9 APPLICATION: APH RADIAL SEAL, APH LOP FLANGE MAKE: TVS/UNBRAKO/CAPARO ) |
| 37 | BOLT,M16X60 ( BOLT HEX 16X60, GR.10.9 WITH DOUBLE NUTS APPLICATION:APH RADIAL SEAL, APH DOOR MAKE: TVS/UNBRAKO/CAPARO ) |
| 38 | HT BOLT M16X100 HEX HEAD,GRADE 10.9 FULL THREAD ( WITH DOUBLE NUTS APPLICATION:Mill +PAPH AXIAL SEAL MAKE: TVS/UNBRAKO/CAPARO ) |
| 39 | HTBOLT,HEXHEAD,M20X100MMFT,GR10.9W/HTNUT # ( WITH DOUBLE NUTS APPLICATION: PAPH AXIAL SEAL MAKE: TVS/UNBRAKO/CAPARO ) |
| 40 | HEX HEAD BOLT M10X40 STANDARD THREAD GRADE: 8.8 ( FULL THREAD, GR. 10.9 WITH NUT APPLICATION:HAG MAKE: TVS/UNBRAKO/CAPARO ) |
| 41 | HTBOLT,HEXHEAD,M24X120MMFT,GR10.9W/HTNUT # ( FULL THREAD APPLICATION:SECTOR PLATE AT COLD END & HOT END IN APH MAKE: TVS/UNBRAKO/CAPARO ) |
| 42 | M16X 70MM HT BOLT, NUT & WASHER, GR.10.9 ( FULL THREAD APPLICATION: PA FAN, FD FAN OF STAGE-II MAKE: TVS/UNBRAKO/CAPARO ) |
| 43 | BOLT,HEX HEAD,HT,M12X40 FT PROPERTY CLASS-8.8/10.9,IS:1364 ( NUT & BOLT: GR.10.9 APPLICATION: PAFAN, FD FAN MAKE: TVS/UNBRAKO/CAPARO ) |
| 44 | BOLT M16X265 WITH NUT & WASHER FOR DRESSER COUPLING AT COAL MILL DROP PIPE ,HALF THREAD, HT, GR.10.9 ( BOLT M16X265 WITH NUT & WASHER FOR DRESSER COUPLING AT COAL MILL DROP PIPE ,HALF THREAD, HT, GR.10.9, MAKE: UNBRAKO/CAPARO/ TVS ) |
| 45 | FASTENER HT BOLT M20X100 HEX HEAD PART THREAD,GRADE 10.9 ( FULL THREAD with plain washer, HT, Gr.10.9 APPLICATION: MPO Base Bolt, MAKE: UNBRAKO/CAPARO/ TVS ) |
| 46 | BOLT,M20X60 ( WITH PLAIN WASHER, HT, Gr.10.9, FULL THREAD APPLICATION: AT MPO Top /MDV Base Bolt FOR MILL XRP 1003 MAKE: UNBRAKO/CAPARO/ TVS ) |
| 47 | MS BOLT M20X45 WITH PLAIN WASHER,GR 4.6 FOR FASTENING COAL CHUTE AT STAGE-2 ,FULL THREAD ( APPLICATION: AT COAL FEEDER CHUTE OF MILL XRP 1003 MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 48 | BOLT,HEX HEAD,HT,M16X70 FT PROPERTY CLASS-8.8/10.9,IS:1364 ( BOLT M16X70 with Nut & plain washer, HT, GR. 10.9 APPLICATION: AT FLANGES (Chute Bottom FLANGE with drop pipe flange), MILL XRP 1003 / PA & FD Fan MAKE: UNBRAKO/CAPARO/ TVS ) |
| 49 | FASTENER MS STUD M16?110,PITCH 2MM ( MS stud M16X160 with double nuts, Gr.4.6 APPLICATION: FOR butterfly valveS at air header to supply air to MDV & power cylinder of MDV FOR MILL XRP 1003 MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 50 | MS BOLT M16X45 WITH NUT, GR 4.6 FOR STAGE-2 MRHS CONVEYING LINE ,FULL THREAD ( IT WILL BE BOLT M16X60 WITH NUT, GR 4.6 APPLICATION: FOR FASTENING FLANGES AT MRHS CONVEYING LINE FOR MILL XRP 1003 MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 51 | HT Nut M8 Hex, Grade 8.8 ( HT Nut M8 Hex, Grade 8.8 MAKE: TVS/UNBRAKO/CAPARO ) |
| 52 | BOLT,ALLEN HD,M12X30,FT,GR 10.9 ( BOLT,ALLEN HD,M12X30,FT,GR 10.9 MAKE: TVS/UNBRAKO/CAPARO ) |
| 53 | WASHER M24 MS ( MAKE: TVS/UNBRAKO/CAPARO, HT, Gr.10.9 ) |
| 54 | WASHER PUNCHED PLAIN A16 ( WASHER SIZE:ID-17MM AND OD-50MM, THICKNESS-3 MM, HT, GR.10.9 APPLICATION: FOR 16MM STUD FOR FASTENING THE COAL NOZZLE, APH RADIAL SEALING. MAKE: TVS/UNBRAKO/CAPARO/OTHERS ) |
| 55 | FASTENER HT STUD M16X60 GRADE 10.9 ( Stud Bolt M16X60 HT Grade:10.9 with double Nut MAKE: TVS/UNBRAKO/CAPARO ) |
| 56 | WASHER M24 MS ( GR. 10.9 for M24 HT BOLT MAKE: TVS/UNBRAKO/CAPARO ) |
| 57 | SS BOLT ( SS BOLT 304 WITH NUT & WASHER, M10 X 100 APPLICATION: FOR FUSTENING NET AT BOTTOM ASH HOPPER MAKE: TVS/UNBRAKO/CAPARO ) |
| 58 | COUPLING BOLT # HEX BOLT (24X95 ) FOR COAL MILL XRP1003 COUPLING BOLT # HEX BOLT (24 mm.); LENGTH - 95 MM WITH 01 NO. NYLOCK NUT & 01 NO OF EN8 BUSH. ( APPPLICATION: MILL (XRP 1003) MOTOR TO INPUT SHAFT MAKE: TVS/UNBRAKO/CAPARO ) |
| 59 | CAP SCREW,HEX SOC,M30X3.5,L230 BHEL ( HT,CAP SCREW,SOC , M30X3.5 , L-230 ,1/3 THREADED,GRADE 12.9 ; AS PER IS:2269, DIN:912,ISO:4762/THREADS ISO METRIC 4G6G AS PER IS:4218, ISO 261,ISO 965/PROP CLASS 12.9/MAT. HIGH GRD ALLOY STEEL APPLICATION: FASTENING THE UPPER & LOWER JOURNAL HOUSING OF RJA OF MILL XRP 1003 MAKE: TVS/UNBRAKO/CAPARO ) Please Enable Macros to View BoQ information |
