|
| 1 | Earth work in excavation for laying different type and size of pipe so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I |
| 2 | Supplying and Installation of 500Ltr. Capacity polythene water storage tank of Himgiri/ Sintex/ Sinter/ Gangotri etc make as per specification and direction of E/I. |
| 3 | Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 25mm dia HDPE Pipe |
| 4 | Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. MJP 23-24 sec-I-IX sl no -2(i) 25mm dia HDPE pipe |
| 5 | supplying and fixing G.I. fitings of approved make (Conforming to I.S:-1879) all complete as per specification and direction of E/I 25mm Dia |
| 6 | Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (From HQ Model estimate 2022 ) |
| 7 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I |
| 8 | Supplying fitting & fixing 15mm male ended CI push cock of approved quality. |
| 9 | Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality.basic rate 109.20 + CP(DWSD SOR M930 (K) |
| 10 | Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes all complete as per specification and direction of Engineer-in-Charge. |
| 11 | Providing and fixing Gun metal full way valve of approved quality all complete as per specification and direction of E/I (a) 15 mm dia weight not less than 300 gms |
| 12 | (b) 50 mm dia weight not less than 1.5Kg |
| 13 | Providing and fixing 1/2'' Float Ball Valve male thread adjustable arm automatic water lavel control for water tank. all complete job as per specification and dir of E/I ( M.R.) |
| 14 | Supplying and fixing GI Fittings as per specification and direction of E/I |
| 15 | GI Elbow 15 mm dia |
| 16 | GI Socket 15 mm dia |
| 17 | GI Nipple 15 mm dia |
| 18 | GI Union Socket 15 mm dia |
| 19 | Jam Nut 15 mm dia |
| 20 | Providing designation 75A brick work in C.M. (1:4) in foundation and plinth -do- |
| 21 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 22 | Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) :3 graded stone aggregate 20mm nominal size) |
| 23 | Providing 12 mm Thick cement plaster (1:6) -do- |
| 24 | Providing 1.5 mm cement punning including curing, carriage of water withall leads and lifts as per building specification and direction of E/I. |
| 25 | Carraige of Materials -do- etc all complete job |
| 26 | Cement – 5 km. lead |
| 27 | Sand – 10km lead |
| 28 | Stone chips –20km lead |
| 29 | Brick – 20km lead |
| 30 | GST @ 18% |
| 31 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
