|
| 1 | Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations. The Contractor will be responsible for making suitable safety arrangements for not letting the debris go through the Head Race Tunnel as the same can damage the delicate parts of the TUrbine installed in the Power House |
| 2 | Clearance and Disposal of mulba In soils; mixed with moorum /Kankar /shingle /boulders; disposal lead upto 50 m and lift upto 1.5 m. The Bidder shall be responsible for dumping of the Mulba on his own on a suitable chunk of land which does not disturb the local population and Ecology of the area. Moreover the boulders extracted are to be used for the crate work to be executed on site |
| 3 | Hire charges of Diesel Truck - 9 tonne (with POL) this is to be employed for taking the mulba out of the headwork. Construction of approach road for the truck shall be in the scope of the contractor as he is supposed to make suitable arrangements for the same |
| 4 | Hydraulic Excavator (3D) with driver and fuel Construction of approach road for the truck shall be in the scope of the contractor as he is supposed to make suitable arrangements for the same |
| 5 | Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD). |
| 6 | Making knitted wire crates of approved mesh-size; including weaving, binding sides and partitions, and binding top after filling; excluding cost of filling, stones and weaving materials |
| 7 | Hand-packing stones in wire-crates/ gabions; excluding cost of crates and stones |
| 8 | Renewing glass panes and refixing existing wooden fillets:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 9 | Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets |
| 10 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm |
| 11 | Providing and fixing bright finished brass tower bolts (barrel type) with necessaryscrews etc. complete :150x10 mm |
| 12 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 0.90ltr/ 10 sqm) |
| 14 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class kail wood 35 mm thick shutters |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : .Second class Kail wood |
| 17 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 100x75x3.50 mm |
| 18 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):18mm for cupboard |
| 19 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked,exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in Charge.With decorative veneering on one side and commercial veneering on other side |
| 20 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws,etc |
| 21 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossfinish etc. complete at all levels.Area of slab over 0.50 sqmGranite of any colour and shade |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.(7850kg/m3) |
| 23 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 24 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. |
| 25 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm |
| 26 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity-White |
| 27 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 470x420 mm bowl depth 178 mm |
| 28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings andbrackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 31 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 32 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 33 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. |
| 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 35 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) ofapproved make and quality as per direction of Engineer-in-charge. |
| 36 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 37 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 38 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 39 | Providing and fixing unplastisised P.V.C. connection pipe with PTMT Nuts of approved quality and colour. 15 mm nominal bore with 45 cm length. |
| 40 | Providing and fixing C.P. brass bib cock of approved quality conforming toIS:8931 : 15 mm nominal bore |
| 41 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia |
| 42 | UPVC bend 87.5° 110 mm bend |
| 43 | uPVC coupler for UPVC drainage pipes 110 mm |
| 44 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia |
| 45 | UPVC bend 87.5° 75 mm bend |
| 46 | U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia |
| 47 | U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia |
| 48 | uPVC coupler for UPVC drainage pipes 75 mm |
| 49 | uPVC single equal Tee (with door) 110x110x110 mm |
| 50 | uPVC single equal Tee (with door) 75x75x75 mm |
| 51 | UPVC pipe clip 110 mm |
| 52 | UPVC pipe clip 75 mm |
| 53 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c trenching .refilling & testing of joints complete as per direction of Engineer in Charge. (External work)PN-16 pipe, 32mm OD (SDR-7.4) |
| 54 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c trenching .refilling & testing of joints complete as per direction of Engineer in Charge. (External work)PN-16 pipe , 25mm OD(SDR-7.4) |
| 55 | Providing and fixing PPR Union 32MM |
| 56 | Providing and fixing PPR Union 25MM |
| 57 | Providing and fixing ball valve (brass) of approved quality complete :PPR 25 mm ball Valve |
| 58 | Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with Glass/SS tank and ABS plastic body to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on outlet side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Capacity 35Lts |
| 59 | Supply, installation, commissioning and testing of 1.5hp motor with fixtures .complete job.Makes:Kirloskar,Crompton,Havells, or similar make. |
| 60 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 61 | Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 62 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns |
| 63 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 64 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1 :3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 65 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) repair of demolished concrete |
| 66 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 67 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in Charge:All kinds of soil |
| 68 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 69 | Random rubble masonry with hard stone laid dry in foundation, plinth &walls Laid without bond stone for soakage pit and allied works |
| 70 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 71 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 500mm internal diameter (MD10) |
| 72 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including 10.16.1 Hot finished welded type tubes |
| 73 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 74 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. |
| 75 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 76 | Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry up to floor five level including hoisting and setting in position in mud mortar using approved quality mud with carriage of material complete Please Enable Macros to View BoQ information |
