Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : ADDN ALTN TO LIVING-IN BILLETS FOR WOMEN AGNIVEER VAYU, ADDN ALTN TO T-149 AND PROVN OF LADIES TOILET AT LOGISTIC SECTION AT HQTC. CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | COMMON ITEMS APPLICABLE FOR 'JOB A' , 'JOB B' & JOB 'C' (B/R & E/M) |
| 3 | Demolition of cement concrete(unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils in soft/loose soil complete all as specified and directed. |
| 6 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 7 | Use and waste of form work to sides of pillers, posts, struts,piers, columns and stanchions for rough finished flat surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed. |
| 8 | Use and waste of form work to side and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels beam,tie beam, cantilevers, shelves including supports, overhangs, etc. also splays between floors and rough finished, complete all as specified and directed. |
| 9 | S&F TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L for PCC type C2 ,1:3:6 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed. |
| 11 | M&L RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 12 | M&L RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 13 | M&L RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers,tie beam,lintels over 1.5m span complete all as specified and directed. |
| 14 | M&L for Precast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc 10 cm in width and setting in mortar 1:6 , complete all as specified. |
| 15 | M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1: 6 , complete in walls complete all as specified and directed. |
| 16 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions and complete all as specified and directed. Note: WPC shall be measured & paid separately. |
| 17 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6,finished even and smooth with out using extra cement complete all as specified and directed. |
| 18 | M&L Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Supply only liquid water proofing compound of approved quality complete all as specified and directed. |
| 20 | M&L for preparing new plastered surfaces and applying three coats of white wash on surfaces of ceilings complete all as specified and directed. |
| 21 | M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 22 | M&L for 40 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer, including mixing of water proofing compound wherever required as per manufacturers instructions and complete all as specified and directed. Note: WPC shall be measured & paid separately |
| 23 | M&L for 100mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in sub-base layer complete all as specified and directed. |
| 24 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified and directed. |
| 25 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and directed. |
| 26 | M&L for Coloured Glazed ceramic design tiles 450X 300X 7-8mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick back coat in cement mortar 1:4 complete all as specified and directed. |
| 27 | M&L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting and polishing of tiles and 20 mm thick screed bed of cement mortar 1:6 complete all as specified and directed. |
| 28 | M&L for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 29 | S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 30 | S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and complete all as specified and directed. Note : sheet Glass and SS wiremesh shall be measured & paid separately. |
| 31 | S&F in Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads complete all as specified and directed. |
| 32 | S&F in 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed. |
| 33 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 34 | S&F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and directed. |
| 35 | S&F 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. |
| 36 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 37 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S&F for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height complete all as specified and directed. |
| 39 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 40 | Excavating in post holes (or similar holes) in soft/loose soil each not exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed. |
| 41 | S&F steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and directed. |
| 42 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. not exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed. Note: Brackets over 10 kg each shall be measured under 'Structural Steel' |
| 43 | S&F Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and no exc 15cm long complete all as specified and directed. |
| 44 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd complete all as specified and directed. |
| 45 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and complete all as specified and directed. |
| 46 | S&F for 1000 ltr capacity rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I.) complete all as specified and directed. |
| 47 | S&F for 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and directed. |
| 48 | S&F for gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed. |
| 49 | S&F fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 50 | S&F PVC connection 15mm size 450mmlong with CP PTMT nuts complete all as specified and directed. |
| 51 | S&F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial ply wood including provn for hanging clips complete all as specified and directed. |
| 52 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc l0cm girth in brick walls complete all as specified and as directed. |
| 53 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 54 | S&F CPVC 20mm dia Brass union complete all as specified and directed. |
| 55 | S&F CPVC 20mm dia Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 56 | S&F CPVC 20mm dia Female Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 57 | S&F fancy type CP 2 way bib cock 15 mm bore with wall flanges fixed complete all as specified and directed. |
| 58 | S&F PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe all as specified and directed. |
| 59 | S&F Standard PVC waste pipe 32mm dia.,complete for WHB complete all as specified and as directed. |
| 60 | S&F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 61 | S&F 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed. |
| 62 | S&F 40 mm dia PVC Pipe all necessary fittings on walls/floor or laying in floors complete all as specified and as directed. |
| 63 | S&F for 40 mm dia Elbow complete all as specified and as directed. |
| 64 | S&F for 40 mm dia Tee complete all as specified and as directed. |
| 65 | S&F 15 mm bore angle stop cock,fancy type, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.complete all as specified and as directed. |
| 66 | S&F 15 mm bore concealed cock, fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 67 | S&F Brass chromium plated tubular towell rail 20 mm dia , D type , 600mm long between flanges fixed with & incl chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed. |
| 68 | S&F Vitreous china wash down water closet (Pedestal pattern, ETWC) having P-trap , white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, with P-trap and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 69 | S&F for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 70 | S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 71 | S&F 150 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rainwater pipe complete all as specified and as directed. |
| 72 | S&F for 75 mm dia PVC Bends with access door complete all as specified and as directed. |
| 73 | S&F for 110 mm dia., PVC Bends with access door complete all as specified and as directed. |
| 74 | S&F for 150 mm dia PVC Bends with access door complete all as specified and as directed. |
| 75 | S&F for 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed. |
| 76 | S&F for 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed. |
| 77 | S&F in repairs for 110 mm dia.,vent cowl complete all as specified and as directed. |
| 78 | S&F for 75mm bore PVC (SWR)multi floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 79 | S&F for Powder coated fancy type Stainless Steel curtain rod 25mm dia , fancy type end top matching to curtain rod of make as approved by GE complete all as specified and as directed. Note:Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same. |
| 80 | S&F Stainless Steel curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified and as directed. |
| 81 | S&F for 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 82 | S&F for 150 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 83 | Removing building materials etc.to a distance of 10.0 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed. |
| 84 | S&F of 2nd class HW plain chowkhats and framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 85 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 86 | M&L for preparing new plastered surfaces on surfaces of walls and applying through mechanical means two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 87 | M&L of Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match complete all as specified and as directed. |
| 88 | M&L for 50mm thick sand cushioning including watering for Interlocking tiles complete all as specified and as directed. |
| 89 | M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed for the following :- Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment shall be made for this. |
| 90 | One light point controlled by one single pole 5 Amps switch. |
| 91 | One exhaust fan/ceiling fan point controlled by one single pole 5 Amps switch. |
| 92 | One 5 pin socket point 5 Amps on independent board. |
| 93 | One 5 pin socket point 5 Amps on same board with other switches. |
| 94 | M&L for concealed point wiring with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc for One 15 Amp switch socket combination on independent board complete all as specified & directed. Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment shall be made for this. |
| 95 | S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified & directed. |
| 96 | S&F Modular socket , 2 Module 6 Amps, 5 pin, 230 volts AC complete all as specified & directed. |
| 97 | S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified & directed. |
| 98 | S&F Modular socket , 2 Module 6/16 Amps, 6 pin, 230 volts AC complete all as specified & directed. |
| 99 | S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified & directed. |
| 100 | S&F Modular white cover plate with frame, 3 module complete all as specified and as directed. |
| 101 | S&F Modular white cover plate with frame, 4module complete all as specified and as directed. |
| 102 | S&F Modular white cover plate with frame, 6 module complete all as specified and as directed. |
| 103 | S&F Modular metal flush box 3 module complete all as specified and as directed. |
| 104 | S&F Modular metal flush box 4 module complete all as specified and as directed. |
| 105 | S&F Modular metal flush box 6 module complete all as specified and as directed. |
| 106 | S&F LED Light fitting, 4 feet 1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 107 | S&F LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 108 | S&F LED light fitting 9/ 10 Watts bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 109 | S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including brackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washers complete all as specified & directed. |
| 110 | S&F Sheet metal enclosure for DB's double door VTPN 04 ways including 01 No MCCB 125 Amp 4 pole 25 KA to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified & directed. |
| 111 | S&F Sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed. |
| 112 | S&F MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10 KA complete all as specified & directed. |
| 113 | S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed. |
| 114 | S&F Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers including making holes in brick/stone wall of suitable size dia for fixing of exhaust fan and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. |
| 115 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and including drilling holes in any type wall fixing four nos anchor bolts five inch size,nuts and washer and connected to water pipe line with two nos hot and cold 600 mm long connection pipe and electric connection testing complete all as specified & directed. |
| 116 | S&F concealed sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.Note- (i) Two runs of single core 2.5 sqmm cable and one run of 2.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment shall be made for this. |
| 117 | S&F concealed sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.Note- (i) Two runs of single core 4.00 sqmm cable and one run of 4.00 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment shall be made for this. |
| 118 | S&F Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. Note: (i) The unit rate includes 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includes galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department. |
| 119 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified & directed. |
| 120 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 121 | M&L for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover , punning of sand using suitable T&P as per site requirement complete all as specified and directed. Note- Punned thickness of sand i.e 18 cm shall be considered for measurement purpose. |
| 122 | Supply and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed. |
| 123 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 4 core connecting with panel DB with suitable size lugs complete all as specified and directed. |
| 124 | ITEMS APPLICABLE FOR 'JOB A' |
| 125 | Demolition of brick work or stone/ boulder masonry/ precast concrete block walling, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and directed. |
| 126 | M&L clay moulded terracota jalli blocks of intricate design, patterns and shapes , kiln burnt, Size of each block 220x220×63 mm, binded using approved adhesive, fixed to Mild steel frame work as required and colouring the tiles wits terracota shade for aesthetic appearance complete all as specified and directed.Note:- Mild steel work shall be measured and paid separately. |
| 127 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 128 | M&L for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and directed. |
| 129 | M&L for preparing old plastered surfaces and applying one coat of cement base paint complete all as specified and directed. |
| 130 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including applying 2 mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and directed. |
| 131 | Complete removal of existing treatment of old plastered surfaces of walls and applying Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and directed. |
| 132 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 133 | M&L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in vertical surfaces with 10 mm thick rendering of cement mortar 1:4 complete all as specified and directed. |
| 134 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4.0 sqm each (without taking off shutters from the frames) and Removing to or from Store complete all as specified and directed. |
| 135 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in hold fast blocks, for pressed steel frames filling, etc. including necessary forms work, moulds etc.complete all as specified and as directed. |
| 136 | S&F 35 mm thick factory made 2nd Class Hard wood Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, size of members of shutters complete all as specified and directed. |
| 137 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 138 | S&F Factory made UPVC white/colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber. Frame (108mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+/-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick glazing with selected quality glass and as required accessories complete all as specified and directed. Note: The unit rate quoted by contractor shall include cost of glass,mesh and includes all other connected accessories. Net Opening area not exceeding 2.00 sqm eachshall be measured for payment purpose. |
| 139 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 140 | S&F 100 mm long Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed. |
| 141 | S&F 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. |
| 142 | S&F 150 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 143 | S&F 300 mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 144 | S&F for Floor door stopper of aluminium alloy body and tongue Overall length of cover plate 140mm long , anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 145 | M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed. |
| 146 | M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 147 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. After cleaning repairing, and removing all scale dirt and wiping, drying etc complete capacity in ltr n. exc.1000 liter (cylindrical vertical with closed top) complete all as specified and directed. |
| 148 | M&L Precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed. |
| 149 | Cutting chases ,pinning in brick work girth exc 10 cm but not exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed. |
| 150 | S&F TMT Bars 6 to 8 mm dia cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 151 | Excavation in trenches not exc 1.5m wide and not exc 1.50 mtrs in depth for foundations etc and getting out in hard/dense soil complete all as specified & directed. |
| 152 | Setting in cement mortar 1:3 and flaunching with cement concrete 1:2:4 type B-l cast iron manhole covers and frames, medium duty, any type and size complete all as specified & directed. |
| 153 | S&F Brass Elbow for 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 with special fittings complete all as specified and as directed. |
| 154 | S&F Brass Tee for 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 with special fittings complete all as specified and as directed. |
| 155 | S&F for Corner Glass Shelf, Fancy Type complete all as complete all as specified and as directed. |
| 156 | S&F for 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 157 | S&F Angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and as directed. |
| 158 | S&F for Vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins white or tinted, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. |
| 159 | S&F for Single lever cast copper alloy, chromoum plated HOT and COLD 15 mm dia Fancy type Wall Mixer complete all as specified and directed. |
| 160 | S&F Fancy type wall mount SS-304 premium grade stainless steel soap holder/stand size 11.5(l) x 8.5(b) x 5.5(h) cm fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 161 | S&F CP health faucet including one mtr length SS connecting pipe complete all as specified and as directed. |
| 162 | S&F Metal Crome Towel Ring with round Flange (medium) size of towel ring 200mm dia Chrome finish complete all as specified and as directed. |
| 163 | S&F Brass chromium plated shower rose 200mmx200mm size with 300mm long stainless steel arms complete all as specified and as directed. |
| 164 | M&L for Treatment of soil under existing floors using chemical emulsion @ one litre per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 sand) to match the existing floors complete all as specified and as directed. |
| 165 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external /internal wall below concrete or masonry apron using chemical emulsion @ 2.25 ltrs per liners metre incl drilling and plugging holes etc in apron complete all as specified and as directed. |
| 166 | Complete removal of existing treatment of walls and applying two coats of exterior emulsion apex paint (weather coat) over a coat of approved primer complete all as specified and as directed. |
| 167 | M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 20 mm thick screed bed of cement mortar 1:6 complete all as specified and as directed. |
| 168 | Removal of plants/ bushes with roots from wall and concrete surfaces and applying herbicide 2,4-Dichlorophenoxyacetic acid as require and make the disturbed area with PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) or Cement mortar 1:4 complete all as specified and as directed. |
| 169 | ITEMS APPLICABLE FOR 'JOB B' |
| 170 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and as directed. |
| 171 | Demolition of cement concrete(reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 172 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed. |
| 173 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 174 | S&F TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 175 | M&L for RCC nominal mix type A1 1:1.5:3 (using 20mm graded stone aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed. |
| 176 | M&L for Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and to prepare the surface even and smooth complete all as specified and directed. |
| 177 | M&L for Preparing new plastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of required shade over a coat of primer over and to prepare the surface even and smooth as specified and directed. |
| 178 | Site Clearance with surface dressing n exc 15cm deep in hard/dense soil complete all as specified and directed. |
| 179 | M&L for coloured designed chequered cement concrete tiles of a size(400x400x25mm/300x300x25mm) thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match & laying on 15 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes all as specified and directed. |
| 180 | M&L for 25 mm thick PCC 1:2:4, type B0 Using 12.5 mm graded stone aggregate as in flooring, rough finish surfaces for receving top layer complete all as specified and directed. |
| 181 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including 3 nos 100mm long Stainless steel butt hings and screws as per specification & drawing complete all as specified and directed. |
| 182 | S&F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 183 | S&F Brass Elbow of 16 mm for CPVC pipes SDR 11 & Plain CPVC SDR 11 with special fittings for hot water only complete all as specified and as directed. |
| 184 | S&F Brass Tee of 16 mm for CPVC pipes SDR 11 & Plain CPVC SDR 11 with special fittings hot water only complete all as specified and as directed. |
| 185 | S&F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. |
| 186 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 187 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 188 | S&F for 20 mm Nipple suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed. |
| 189 | M&L for Rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction all as specified and as directed.(Note : WPC shall be measured and paid separately as supply only under relevent item) |
| 190 | M&L for water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer & 0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10 cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.1 Kg/Sqm over RCC roof slab/ projection/ parapet after cleaning the surfaces by removing dust dirt etc as manufactures instructions complete all as specified and directed. |
| 191 | ITEMS APPLICABLE FOR 'JOB C' |
| 192 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 193 | S&F MS TMT bars but 6 to 8mm dia as in stirups over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia all as specified and as directed |
| 194 | S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified & directed. |
| 195 | S&F Modular white cover plate with frame, 8 module complete all as specified and directed. |
| 196 | S&F Modular metal flush box 8 module complete all as specified and directed. |
| 197 | S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed. |
| 198 | M&L for concealed sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.Note- (i) Two runs of single core 6.00 sqmm cable and one run of 6.00 sqmm earth wire including PVC concealed conduit together shall be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment shall be made for this. |
| 199 | S&F MCB SPN, 40 to 63 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed. |
| 200 | M&L Plain cement concrete 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in benching,coping including weathering slightly rounded or chamfered angles or as per site requirement with necessary plastering work complete all as specified and directed. |
| 201 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 sqmm 4 core connecting with panel,DB with suitable size lugs complete all as specified and directed. |
| 202 | M&L for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including new Flat Iron clamps=02 Nos of size 50x6mm made to shape incl nuts,bolts & washers complete all as specified and directed. |
| 203 | M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified & directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
