|
| 1 | Excavation in trenches in soft/ loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay and pipe line,and getting out complete all as specified and directed. |
| 2 | Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in soil complete all as specified and directed. |
| 3 | Removing excavated soil n. exc 50 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Supply and Laying double walled corrugated (DWC) HDPE duct pipe in 6 mtr lenght conforming to IS 16205 Pt-24 of approved color complete with fittings for cable protection of size 50mm outer dia and 38mm inner dia complete all as specified and directed. Make:- Astral/ Universal/ Dutron/SFMC as approved by GE. |
| 5 | Supply and Laying double walled corrugated (DWC) HDPE duct pipe in 6 mtr lenght conforming to IS 16205 Pt-24 of approved color complete with fittings for cable protection of size 63mm outer dia and 50mm inner dia complete all as specified and directed. Make:- Astral/ Universal/ Dutron/SFMC as approved by GE. |
| 6 | Taking out old serviceable/ unserviceable LT UG cables of any size of 10 to 35 sq mm, 2/3.5/4 core from trenches, poles/walls and floor includuing taking out old serviceablee bricks from trenches complete all as specified and directed. |
| 7 | Laying only serviceable XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of 10 sqmm to 50 Sqmm 3.5/4 core sizes laid in trenches or fixed on walls/floor/pole complete all as specified and as directed. |
| 8 | Supply and Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of the following sizes laid in trenches or fixed on wall/floor/poles complete all as specified and as directed :- |
| 9 | 10 Sq mm 4 core |
| 10 | 16 Sq mm 4 core |
| 11 | 25 Sq mm 4 core |
| 12 | 35 Sq mm 3.5 core |
| 13 | 50 Sq mm 3.5 core |
| 14 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed. |
| 15 | Supply and fixing in repairs of GI tubing 'light grade' of 40 mm bore for cable protection on pole/wall/floor/or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket complete all as specified and directed. |
| 16 | Supply and fixing in repair 150 watt LED flood light fitting suitable for high mast light with and including all fixing arrangement high grade aluminium pressure die cast and toughend glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed. |
| 17 | Supply and fixing in repair 200 watt LED flood light fitting suitable for high mast light with and including all fixing arrangement high grade aluminium pressure die cast and toughend glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed. |
| 18 | Supply and fixing in repair 250 watt LED flood light fitting suitable for high mast light with and including all fixing arrangement high grade aluminium pressure die cast and toughend glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed. |
| 19 | Taking out lantern carriage of high mast light fitting with the help of integral power tools for repair and maintenance of unserviceable parts of any capacity and type with new parts (items replaced shall be measured and paid seperately as \\"supply & fixing in repair\\") and made the fittings serviceable and re-fixing the lantern carriage at the original position complete all as specified and directed. |
| 20 | Supply and fixing in repair LED aviation obstruction light in red colour with 48 W capacity by lowering the lantern removing the old light and refixing the new one and raising the lantern in same position with coonected accesssories complete all as specified and directed. |
| 21 | Supply and fixing in repair stainless steel wire rope grade- AIAI 304, 7/19 construction of dia 6mm with breaking load capacity as per standard norms for highmast including removal of old wire rope and reconnection with proper connected accessories complete all as specified and directed. |
| 22 | S& F in repair Diamond chain B.S (I) 3/8 suitable for highmast motor roatation with connected accessories including taking down old sprocket and replaced with all fixing arrangment complete all as specified and directed. |
| 23 | S& F in repair sprocket 3/8 with Hub TH-14 heavy duty suitable for highmast motor and roatary part with connected accessories including taking down old sprocket and replaced with all fixing arrangment complete all as specified and directed. |
| 24 | Supply and fixing in repair copper conductor of size 5core, 2.5 Sqmm rubber insulated and cotton braiding over the laid up cores pvc sheathed flexible type for highmast trailing rubber cable including removal of old cable and reconnecting with proper size of thimble and connected accessories complete all as specified and directed. |
| 25 | Supply and fixing in repair copper conductor of size 1.5 sqmm three core for highmast light connnection including connected accessories complete all as specified and directed. |
| 26 | S&F in repair Weather Proof thermo plastic (Polysterene) Cable Junction box with 4 aluminium strip bar (25x3 mm) , having protection class IP-65 and of overall size 205mm x 255mm x 112mm having metric knockouts on the wall, having three phase cable connecter, duly fixed with the pole with clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 17mm (Complete with check nut) and including 1 No, 30 Amps 4 Way cable connector and 1 No, 6 Amps SP MCB complete all as specified and directed. |
| 27 | M & L Painting to existing LT Panels, angle iron support bracings, clamps etc. with two coats of aluminium paint superior quality of approved make on surfaces exposed to view external surface above PCC benching including preparation of old painted surfaces by scraping etc complete all as specified & directed. |
| 28 | S & F in repair cage for protection/housing LED lights made out of 4mm dia GI wire along with suitable size of angle iron frame fixed on foundation with necessary anchor fastner and nut bolts etc complete the size of cage should be 550x450x550 mm including one side with cage opening and locking arrangement and painted with black super enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 29 | Material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.00mm thick burried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate shall be at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of 25 x 4 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by medium 40 mm dia GI pipe connected to main switch board or main control board or equipment and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, 40mm thick RCC pit cover reinforced with 8mm dia TMT bar at 75 mm c/c both ways and lifting arrangement by providing handles (02 Nos) of 12mm dia MS round bar and PCC chamber pit with PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) including excavation and earth work in soft/loose soil, returning, filling in with excavated soil and disposal of surplus spoil to a distance not exceeding 50m and shown in electrical Plate No 3 of SSR 2009 (Part-I) complete all as specified and directed. |
| 30 | Demolition of PCC/Black bituminous road of any description and in any position not otherwise specially provided , etc complete all as specified and directed. |
| 31 | M&L for Cement Concrete (1:2:4) type B1 using 20 mm gradded stone aggregate for coping of poles, panel board and filling of road cutting etc complete all as specified and as directed. |
| 32 | M&L for rendering 15 mm thick 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) all as specified and directed |
| 33 | M & L Painting to existing light pillar with two coats of synthetic enamel paint of superior quality of approved make on surfaces exposed to view external surface above PCC benching including preparation of old painted surfaces by scraping etc complete all as specified & directed. |
| 34 | Supply & fixing in Replacement of control panel outdoor type size 500x775x250 made of 14 SWG CRCA sheet with, IP-55, stand (made of 40x40x5 MS angle) mounted feeder piller with including aluminium busbar-4 nos 63 A internal wiring with 6 Sqmm copper wire for 32A circuit and 2.5 Sqmm for others. Complete forf autometic, timely Off/On for operating 6 to 10 Nos) 250 watt LED light fitting. (i) incoming 32 A 4pole MCB isolater- 01 no. Make- siemens/ABB/L&T(ii) 22A TP Contactor- 01 No.Make- siemens/ABB/L&T (iii) 9A contactor- 02 nos. Make- siemens/ABB/L&T(iv) single dial timer switch - 01 no. Make- L&T (v) push button- 02 No. (vi) Outlet Terminal- 02 nos. (vii) Toggle switch- 01 no (viii) Neutral link- 01 no (ix) Glass fuse- 01 no |
| 35 | M & L for repair of control panel of high mast light fitting complete with checking all electrical wiring and contactor including removing the old burnt control wiring from the panle and re-wiring with new PVC insulated copper cable single core multi strand with existing size and made the panel serviceable including testing after completion of work complete all as specified and directed. |
| 36 | Supply and fixing in repair MCB FP 40 t0 63 Amps, 230 volts, 10 KA with enclosure in existing highmast panel complete all as specified and directed. |
| 37 | Supply and fixing in repair MCB SPN 6 to 32 Amps, 230 volts, 10 KA with enclosure in existing highmast panel complete all as specified and directed. |
| 38 | Supply and fixing in repair MCB SP 6 to 32 Amps, 230 volts, 10 KA with enclosure in existing highmast panel complete all as specified and directed. |
| 39 | Supply and fixing in repair high mast three phase motor of capacity 1.5 HP with reverse and forward moving ,6 pole single speed suitable for high mast complete all as specified and directed. Make- Havells/Crompton or equivalent |
| 40 | Repair/Maintenance winch/power tool double drum type/350 Kg suitable for lowering and raising the highmast lantern including dismantling of winch/power tool and refixing after repair with connected accessories complete all as specified and directed. |
| 41 | M&L for re-winding of existing highmast three phase motor of capacity upto 1.5 HP with reverse and forward moving ,6 pole single speed suitable for high mast including dismantling of motor and refixing after rewinding in same position with connected accessories complete all as specified and directed. |
| 42 | Repair & maintainenace three phase motor of capacity 1.5 HP with reverse and forward moving ,6 pole single speed suitable for high mast including dismantling of motor and refixing after repair/servicing in same position with connected accessories complete all as specified and directed. |
| 43 | Deduct Schedule of Credit of ₹ 62390.00 as brought out from serial page No 29 of tender Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 44 | Old Unserviceable XLPE cable any type / size |
| 45 | Old Unserviceable lights any type |
| 46 | Old Unserviceable cable 2.5 sqmm 5 core |
| 47 | Old Unserviceable wire rope |
| 48 | Old Unserviceable motor |
| 49 | Old Unserviceable wire 1.5 sqmm any type |
| 50 | Old Unserviceable junction boxes |
| 51 | Old Unserviceable panel highmast |
| 52 | Old Unserviceable MCBs/Isolator any type |
| 53 | Old Unserviceable earthing of any type |
| 54 | Old Unserviceable MS cage of any type and any size |
| 55 | Old brick/brick bat |
| 56 | Old Unserviceable HDPE pipe of any size Total amount of credit schedule 62390.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER |
