|
| 1 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm in soft/ loose soil complete all as specified and as directed. |
| 2 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 3 | Surface dressing not exc 15cm deep in soft/loose soil complete all as soecified and as directed |
| 4 | M&L for broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 5 | M&L for 100 mm thick providing cement concret type D-2 (1:4:8) using 40 mm graded stone aggregated for sub-base of flooring hardstanding complete all as specified and as directed. |
| 6 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all specified and as directed. |
| 7 | S&F Mild steel framed work in tubular trusses using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed. |
| 8 | M&L mild steel plates (plain or chequered), channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment etc, conforming to Fe-410W Gde E-250 compete as specified and as directed |
| 9 | M&L for preparation of new iron and steel surfaces of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed. |
| 10 | S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 11 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 12 | S&F rain water drainage pipe PVC (SWR) pipes single socketed, 110mm bore in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 13 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 14 | Supply and fixing of 1.25 mm thick pressed steel door frames of size 125 mm x 60 mm with one or more rebated including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 15 | S&F 35 mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 clause 8.24(a) and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.(Note :- S&F Glass/gauge shall be measured and paid for separately) |
| 16 | S&F 35 mm thick solid core construction, with particle board core and plywood face panels, commerical type on both sides complete all as specified and as directed. |
| 17 | S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 18 | S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 19 | S&F for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 20 | S&F 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws etc complete all as specified and directed. |
| 21 | S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 22 | S&F 125 mm Extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed. |
| 23 | S&F 200 mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 24 | S&F 250 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed. |
| 25 | S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of apreture 1.18 mm & fixed with tinned tacks on galvanised wire staples fixed complete all as specified and directed. |
| 26 | M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and as directed. |
| 27 | S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 28 | Supply, installation, testing and commissioning of 80 Ltr Storage / 50 LPH Water Cooler with Inbuilt Water Purifier :Supply, installation, testing and commissioning of electrically operated water cooler suitable for operation on single phase 230V, 50 Hz AC supply, having stainless steel body construction, storage capacity not less than 80 litres and nominal cooling capacity of 50 litres per hour at ambient temperature 43°C and inlet water temperature 32°C complete with inbuilt water purification system of minimum 100 litres per hour purification capacity, comprising sediment filter, activated carbon filter, RO membrane, UV sterilization and UF cartridge complete with food grade storage tank, automatic flushing arrangement and all accessories. all as specified & directed. |
| 29 | Supply, installation, testing and commissioning of 80 Ltr Storage / 120 LPH Water Cooler with Heavy Duty Purifier :Supply, installation, testing and commissioning of heavy duty electrically operated water cooler suitable for operation on single phase 230V, 50 Hz AC supply, having stainless steel body construction, storage capacity not less than 80 litres and nominal cooling capacity of 120 litres per hour at ambient temperature 43°C and inlet water temperature 32°C complete with inbuilt industrial water purification system of minimum 120 litres per hour purification capacity comprising sediment filtration, activated carbon filtration, RO membrane, UV sterilization and UF treatment complete with automatic operation, food grade water storage arrangement and all accessories all as specified and as directed. |
| 30 | Supply and fixing of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and as directed. |
| 31 | M&L for point wiring complete as specified with 1100 V grade with 2.5 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including pvc concealed conduit with concealed modular box suitable for logic modular switches, sockets, etc and logic modular white plates, surroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 2.5 sq mm as earth wire connected to common earth dolly as specified complete all as specified and directed for the following:-Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment shall be made for the same) |
| 32 | Supply and fixing 20 Amp power outlet point comprising 20A, 250V heavy duty 3-pin socket outlet with 20A SP MCB mounted on suitable MS/ PVC box complete with FRLS copper wiring, earthing connection, testing and commissioning all as specified and as directed. |
| 33 | Supply and fixing CPVC pipe of size 20 mm inner dia in trenches/ Wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, like elbow, Tee, Socket, reducer, bushings, step over bends, end caps, end plugs, etc and with CPVC solvents cement complete all as specified and as directed. |
| 34 | Supply & fixing brass stop cock 20mm dia heavy duty complete all as specified and directed. |
| 35 | M&L for Making connection with existing water supply line including cutting/chasing complete all as specified and directed. |
| 36 | M&L for providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth and Distempering two coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on new work complete all as specified and as directed. Please Enable Macros to View BoQ information |
