|
| 1 | Surface dressing n. exc. 15cm deep in any type of soil complete all as specified and directed. |
| 2 | Exc. in trenches n.exc. 1.5m wide and n.exc1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as specified and directed. |
| 3 | M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in foundation filling and mass concrete complete all as specified and directed. |
| 4 | M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks (best quality) built in CM 1:6 complete all as specified and directed. |
| 5 | M&L RCC (1:2:4) type B-1(using 20mm graded crushed stone aggregate) as in plinth beam beams complete all as specified and directed. |
| 6 | M&L RCC (1:2:4) type B-1(using 20mm graded crushed stone aggregate) as in lintel and over 1.50 mtr height complete all as specified and directed. |
| 7 | S&F Form work to sides of concrete foundation, footing, bases of columns,raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work complete all as specified and directed. |
| 8 | S&F Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 9 | M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking binding spirally for hooping for column hooking and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L Mild steel TMT bars 5mm dia and over, upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed. |
| 11 | Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement with integral water proofing compound and two coats of cement base paint over one coat primer complete all as specified and directed. |
| 12 | Supply only liquid water proofing compound complete all as specified and directed. |
| 13 | Rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement and applying three coats of white wash on newly plastered surface incl preparation of surface complete all as specified and directed. |
| 14 | M&L for Hardcore of broken stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 15 | M&L Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg and 75mm thick as in sub base of floors complete all as specified and directed. |
| 16 | M&L 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone agg as in floors complete all as specified and directed. |
| 17 | M&L Non - skid jointless ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 18 | M&L for coloured glazed ceramic tiles (designer Pattern, HL) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7 mm /450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed. |
| 19 | S&F for Rolled sections as in post, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde- E-250 quality-B) complete all as specified and directed. |
| 20 | S&F Roof trusses (framed) trussed, purlin, crane gantries, plate, rail and fastening and heavy brackets framing ( Beams, Tee, angle, channel or flat section) incl. distance pieces, cleat etc. confirming to Fe-410-W (Gde-E-250) quality B all as specified and directed. |
| 21 | M&L painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel surface of description incl preparation of surfaces over 10 CM width or girth, not other wise described complete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | Supply & Fix Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified and directed. |
| 25 | Supply & Fix 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified and directed. |
| 26 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 27 | S&F Factory made solid PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with slovent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 28 | S&F Butt hinges medium weight cold rolled mild steel 100mm and fixed complete all as specified and directed. |
| 29 | S&F Aluminium anodised, barrel tower bolt of extruded section and fixed 150mm complete all as specified and directed. |
| 30 | S&F Aluminium handles cast type anodised 150mm complete all as specified and directed. |
| 31 | M&L, PCC (1:3:6) type C2, using 40mm graded crushed stone aggregate as in plinth protection laid in panel alternate bays not exc 2.00 sqm with 6mm wide joints and joints filled with mastic fillings, finished even and fair complete 50mm thick complete all as specified and directed. |
| 32 | S&F steel ventilators fixed type with glazing bars complete all as specified and directed. |
| 33 | S&F Figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane 3.00mm thick complete all as specified and directed. |
| 34 | S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 15mm complete all as specified and directed. |
| 35 | S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 20mm complete all as specified and directed. |
| 36 | S&F Bib tap 15mm bore fancy type chromium plated ,cast copper alloy with capstan head screwed down for iron pipes complete all as specified and directed. |
| 37 | S&F 15 mm bore dia fancy type Pillar taps, castcopper alloy, withcapstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 38 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 39 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified and directed. |
| 40 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified and directed. |
| 41 | S & F PVC (SWR) junction single (Single T) equal or unequal with acess door, 110 mm dia complete all as specified and directed. |
| 42 | Supply & Fixed PVC (SWR) bends with access door of 75 mm dia radius complete all as specified and directed. |
| 43 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 44 | S&F Grating doom 100mm dia of PTMT ( Minimum weight 25 gms) complete all as specified and directed. |
| 45 | S & F in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed. |
| 46 | S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 47 | S&F Vitreous China Ware Wash hand basin white, flat back, size 210 x 580 x 460 x mm size with long pedastal,32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm dia stainless steel waste coupling of including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. |
| 48 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwashers complete all as specified and directed. |
| 49 | Supply & Fixed in repairs vitreous china squatting pan, Orrisa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe of complete all as specified and directed. |
| 50 | S & F vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover but excluding flushing cistern and flush pipe complete all as specified and directed. |
| 51 | S&F Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated complete all as specified and directed. |
| 52 | S&F PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 Ltrs capacity fixed complete all as specified and directed. |
| 53 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 54 | S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F Soap dish,vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 56 | Supply & Fixed 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified and directed. |
| 57 | S&F PVC connections suitable for 15mm bore with nuts of length 600mm each (superior quality) complete all as specified and directed. |
| 58 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, fixed in repairs complete all as specified and directed. |
| 59 | S&F CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 60 | Supply & Fix Powder coated Anodised aluminium frame(Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 61 | Supply & Fix Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 62 | Supply & Fix 5.5mm thick plain sheet glass as in window and door shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 63 | Supply & Fix Solar control film 25 micron reflective type ISI marked sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 64 | Supply & Fix 12 mm Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and directed. |
| 65 | S & F in repairs cast aluminium (extruded section body) door closer by hydraulically regulated, designation No.3 univrsal type, suitable for door shutters up to 851mm to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as specified and directed. |
| 66 | M&L Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg, 100mm thick as in sub base of floors complete all as specified and directed. |
| 67 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) 40mm thick as in concrete floor finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 68 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed. |
| 69 | M&L PCC 1:2:4 Type B2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete complete all as specified and directed. |
| 70 | Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone agg as in hardstanding/flooring 75 mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 71 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, reailing, framework of watertanks and similar work conforming to Fe-290, gde E-165 complete all as specified and directed. |
| 72 | S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 73 | S&F 20mm Gun-metal, globeor gate valves, with iron wheelhead,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 74 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 75 | M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 76 | Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed. |
| 77 | M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed. |
| 78 | M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, kerbs including necessary formwork etc complete all as specified and directed. |
| 79 | M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in copings, Kerbs including necessary formwork etc complete all as specified and directed. |
| 80 | M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe all complete all as specified and directed. |
| 81 | M&L Reinforced concrete pipes, class NP3 ISI marked, laid and jointed complete with collars 150 mm bore laid in trenches and jointed with CM 1:1 complete all as specified and directed. |
| 82 | Rendering 15mm thick on fair faces of bricks in CM 1:4 finished even and smooth without using extra cement using WPC @ 3% of cement complete all as specified and directed. |
| 83 | M&L for PCC 1:2:4 type B2 as in drain complete all as specified and directed. |
| 84 | M&L for Extra for forming fair finished drain o rchannel 30 cm inner girth complete all as specified and directed. |
| 85 | Returning filling in incl spreading, leveling watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed. |
| 86 | Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 87 | M&L for Precast cement concrete slab for Manhole cover of type B-1, 1:2:4 (using 20 mm graded crushed stone agg.) set in CM 1:6 complete all as specified and directed. |
| 88 | Septic tank, exc. In ordinary soil foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab covers incl RCC pre-cast manhole cover having 6mm plate all around, reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete for 50 user as per CE/TD-1202 Sh ½ and 2/2 complete all as specified and directed. |
| 89 | Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.8 M dia X 3.0M deep complete all as specified and directed. |
| 90 | Mild steel Tubes, 'light grade', galvanised, with all fitting; laid in trenches for road/drain crossing of size 25 mm complete all as specified and directed. |
| 91 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed. |
| 92 | S&F Gun metal, globe or gate valves , with iron wheel head, 25 mm bore as per requirement of the site complete all as specified and directed. |
| 93 | S&F mild steel Tubes, 'meduim grade', 25 mm galvanised, with all fitting; laid in trenches complete all as specified and directed. |
| 94 | M & L for Sand cushioning to under ground cable laid in trenches for laying of LT UG cable 8 cm depth before laying the cable and 15 cm after laying and punned down to depth of 10 cm as per MES SSR Part -I ( 2009) complete all as specified and directed. |
| 95 | M&L for un-reinforced precast concrete cable cover class LV, type 2, flat of size 300X180X40 mm for protection of cable laid transversally along the length of cable complete all as specified and directed. |
| 96 | Supply,Laying and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor,1100 volts grade cross sectional area 10 sqmm 2.0 core cable complete all as specified and directed. |
| 97 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete all as specified and directed for the following :- |
| 98 | One light point controlled by one switch complete all as specified and directed. |
| 99 | One socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed. |
| 100 | One socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed. |
| 101 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed. |
| 102 | Supply and fix 10 watt LED Bulb complete all as specified and directed. |
| 103 | Supply and fix lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed. |
| 104 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 105 | S&F switch piano flush button single pole one way 6 amp complete all as specified and directed. |
| 106 | S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and directed. |
| 107 | S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed. |
| 108 | S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed. |
| 109 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 110 | Supply and fix exhaust fan heavy duty, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 111 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 112 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 113 | S&F MCB distribution board SPN, 240 volts, 8 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed. |
| 114 | S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- |
| 115 | Single pole 6 to 40 Amp complete all as specified and directed. |
| 116 | Single pole and neutral 10 to 40 Amp complete all as specified and directed. Please Enable Macros to View BoQ information |
