|
| 1 | Supplying Sal-bullah piles at work site, including dressing and making one end pointed. |
| 2 | (a) 150mm diameter |
| 3 | Coal tarring on wooden surfaces including cost of materials. |
| 4 | (a) Double Coat |
| 5 | Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. |
| 6 | (a) 150 mm dia |
| 7 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand/stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. |
| 8 | a) Depth of excavation not exceeding 1500mm. |
| 9 | b) Beyond 1.50 m to 3.0 m below G.L |
| 10 | Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directedand consolidating same by thorough saturation with water ramming complete, includingthe cost of supply of sand.(Payment to be made on the basis of measurement of finished quantity) |
| 11 | Dewatering by pupms including all leads, lifts and making all arrangements of disposal, where continuous flow of water from a source other than natural or ground water is encountered in case of emergency maintenance works related to leakage, breakage and making wet connections. |
| 12 | Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. Including watering and ramming etc. layer by layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work .) |
| 13 | (a) With earth obtained from excavation of foundation. |
| 14 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 15 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. |
| 16 | a) Pakur Variety |
| 17 | Ordinary Cement Concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement. If any, in ground floor as per relevant IS codes. |
| 18 | a) Pakur Variety |
| 19 | Extra rate for using water proofing and plasticising admixture @ 0.2% byweight of cement (or at manufacturer's specified rate) for concrete of various grades. |
| 20 | Hire & labour charges for shuttering with centreing and necessary staging upto 4 m using approved stout and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams,columns, lintels curved or straight includingfitting, fixing and striking out after completion of work .(Upto roof of ground floor). |
| 21 | 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. |
| 22 | Reinforcement for reinforced concrete work in all sorts of structures including CIstribution bars,stirrups, bindees etc.includingsupply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bendIng to correct shape, placing in proper position and bindIng with 16 gauge black annealed wire at every intersection, complete as per drawing and dIrection. |
| 23 | (a) For works in foundation, basement and up to roof of ground floor//upto 4 m. |
| 24 | (i) Tor Steel/Mild Steel |
| 25 | (I) SAIL/TATA/RINL |
| 26 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants andlabour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. |
| 27 | Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. |
| 28 | III) For built up sections / srtuctural members of specified sectionsweighing not less than 22.5 Kg./m |
| 29 | Brick work with 1st class bricks in cement mortar (1:4). |
| 30 | (a) In foundation and plinth |
| 31 | 125 mm thick brick work with 1st class bricks in cement mortar 1:4 in ground floor. |
| 32 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 33 | (a) For Exposed Work PVC Pipes |
| 34 | 150 mm |
| 35 | Plaster (to wall, floor, celling etc.)with sand and cement mortar including roundaing of or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/ staging where necessary (G Floor). (excluding cost of chipping over concrect surface ) With (4:1) cement mortar. |
| 36 | (i) In Ground floor |
| 37 | (a) 20 mm thick Plaster |
| 38 | (b) 15 mm thick plaster |
| 39 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 40 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item isnot permitted with ordinary |
| 41 | (a) 35 mm thick |
| 42 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. |
| 43 | 1. (Measurement will be made on the area of opening covered bythe rolling shutter corrected upto 2 decimal.)2. Payment of painting to be separately. |
| 44 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 45 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 46 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : |
| 47 | (a) On timber or plastered surface : |
| 48 | surface : With super gloss (hi gloss) - |
| 49 | (i) Two coats (with any shade except white) |
| 50 | b) On steel or other metal surface : |
| 51 | with Super gloss (high gloss) |
| 52 | (i) Two coats (with any shade except white) |
| 53 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. |
| 54 | (I) In ground Floor |
| 55 | (a) Two Coats |
| 56 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint havingadhesive & waterproofing properties by mixing in proportion (1 liquid: 4cementitious material) or as per manufacturer's specification for waterproofing layer in water tank etc. (No Departmental Cement is required) |
| 57 | (i) Premium 100% Acrylic Emulsion |
| 58 | A) In ground floor (two Coats) |
| 59 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 60 | Added GST @ 18% |
| 61 | Added Cess @ 1% Please Enable Macros to View BoQ information |
