|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 2 | Group A |
| 3 | Group B |
| 4 | Group C |
| 5 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 6 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated, copper conductor, single core cable in surface/ recessed steel conduit as reqired. |
| 7 | 2 x 4 Sqmm. + 1 x 4 sqmm earth wire |
| 8 | 2 x 6 Sqmm. + 1 x 6 sqmm earth wire |
| 9 | 2 x 10 Sqmm. + 1 x 6 sqmm earth wire |
| 10 | 2 x 16 Sqmm. + 1 x 6 sqmm earth wire |
| 11 | 4 x 10 Sqmm. + 2 x 6 sqmm earth wire |
| 12 | 4 x 16 Sqmm. + 2 x 6 sqmm earth wire |
| 13 | Wiring for circuit/ submain wiring alogwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 14 | 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earh wire |
| 15 | 2 x 4 Sq.mm + 1 x 4 Sq.mm earh wire |
| 16 | 2 x 10 Sqmm. + 1 x 6 sqmm earth wire |
| 17 | 2 x 16 Sqmm. + 1 x 6 sqmm earth wire |
| 18 | 4 x 10 Sqmm. + 2 x 6 sqmm earth wire |
| 19 | 4 x 16 Sqmm. + 2 x 6 sqmm earth wire |
| 20 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 21 | Group A |
| 22 | Group B |
| 23 | Group C |
| 24 | Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as reqd. |
| 25 | 1 x 1.5 Sq.mm.. |
| 26 | 2 x 1.5 Sq.mm.. |
| 27 | 3 x 1.5 Sq.mm.. |
| 28 | 2 x 4 Sq.mm.. |
| 29 | 3 x 4 Sq.mm.. |
| 30 | 4 x 4 Sq.mm.. |
| 31 | 2 x 6 Sq.mm.. |
| 32 | 3 x 6 Sq.mm.. |
| 33 | 4 x 6 Sq.mm.. |
| 34 | Supplying and drawing telephone cable of 2 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 35 | Supplying and fixing of following size of steel conduit along with the accessories in surface/recess I/c painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit. as reqd. |
| 36 | 20 mm |
| 37 | 25 mm |
| 38 | 32 mm |
| 39 | 40 mm |
| 40 | Supply and fixing of following sizes of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as reqd. |
| 41 | Supplying and fixing metal box of following sizes ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in the front I/c painting etc as reqd. |
| 42 | 100 mm x 100 mm x 60 mm deep |
| 43 | 180 mm x 100 mm x 60 mm deep |
| 44 | 200 mm x 150 mm x 60 mm deep |
| 45 | 200 mm x 250 mm x 75 mm deep |
| 46 | 200 mm x 300 mm x 60 mm deep |
| 47 | 250 mm x 300 mm x 100 mm deep |
| 48 | Supplying and fixing following piano type switch /socket on existing switch box/cover I/c connection etc as reqd. |
| 49 | 5/6 Amp switch |
| 50 | 2 way 5/6 amp switch |
| 51 | 15/16 Amp. switch |
| 52 | 3 Pin 5/6 Amp. socket outlet |
| 53 | 6 Pin 15/16 Amp. socket outlet. |
| 54 | Telephone socket / jack outlet |
| 55 | TV antenna socket outlet |
| 56 | Call bell push |
| 57 | Supply, fixing, following modular type switch / socket on existing modular plate & switch box including connectins but excluding modular plate etc. as reqd. |
| 58 | 5/6 Amp switch |
| 59 | 2 way 5/6 amps switch |
| 60 | 15/16 Amp. switch |
| 61 | 3 Pin 5/6 Amp. socket outlet |
| 62 | 6 Pin 15/16 Amp. socket outlet. |
| 63 | Telephone socket outlet |
| 64 | Bell Push |
| 65 | Fan regulator socket type rotary step |
| 66 | Blanking plate |
| 67 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 68 | 1/2 module (75mm X 75mm) |
| 69 | 3 module (100mm X 75mm) |
| 70 | 4 module (125mm X 75mm) |
| 71 | 6 module (200mm X 75mm) |
| 72 | 8 module (125mm X 125mm) |
| 73 | 12module (200mm X 150mm) |
| 74 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as reqd. |
| 75 | 1 or 2 module |
| 76 | 3 module |
| 77 | 4 module |
| 78 | 6 module |
| 79 | 8 module |
| 80 | 12 module |
| 81 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 82 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 83 | Supplying and fixing 3 pin, 5 amp. Ceiling rose on the existing junction box/ wooden block including connection etc. as reqd. |
| 84 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 85 | Supplying and fixing call bell/ buzzer suitable for ac single phase, 230 volts, complete as required. |
| 86 | Installation, testing and commissioning pre-wired fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sqmm FRLS PVC insulated, copper condutor,single core cable and earthing etc. as required. |
| 87 | Providing and fixing extra conduit down rods of 20 mm dia. 2 x 10 cm length with 2 x 1.5 Sqmm FRLS PVC insulated copper conductor single core cable i/c painting etc. as reqd. (Note - More than 5 cm length shall be rounded nearest 10 cm & 5 cm or less shall be ignore) |
| 88 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 89 | Painting of ceiling fan any size with one or more coats with supper enamel paint of approved brand i/c cleaning and making smooth surface with emery paper and detergent etc. as required. |
| 90 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 91 | 1 run of cable |
| 92 | 2 run of cable |
| 93 | 3 run of cable |
| 94 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required |
| 95 | 100 Amp, TP MCCB |
| 96 | 125 Amp, TP MCCB |
| 97 | 150 A, 16 KATPMCCB |
| 98 | 200 A, 25 KATPMCCB |
| 99 | 250 A, 25 KATPMCCB |
| 100 | 100 A,30KA,FPMCCB |
| 101 | 125 A,36KA,FPMCCB |
| 102 | 200 A,36KA,FPMCCB |
| 103 | 250 A,36KA,FPMCCB |
| 104 | 250 A,50KA,FPMCCB |
| 105 | 400 A,50KA,FPMCCB |
| 106 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 107 | 6-way , Double door |
| 108 | 8-way , Double door |
| 109 | 12-way , Double door |
| 110 | 16-way , Double door |
| 111 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 112 | 4-way (4 + 12), Double door |
| 113 | 6-way (4 + 18), Double door |
| 114 | 8-way (4 + 24), Double door |
| 115 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) and should have provision for MCCB as incomer. |
| 116 | 4-way (4 + 12), Double door |
| 117 | 8-way (4 + 24), Double door |
| 118 | 12-way (4 + 36), Double door |
| 119 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, MCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. |
| 120 | Single Pole |
| 121 | Single Pole & Neutral |
| 122 | Triple Pole |
| 123 | Triple pole & Neutral |
| 124 | Supplying and fixing single pole blanking plates in existing MCB DB complete etc. as required. |
| 125 | Supplying and fixing following rating double pole (single phase & neutral) 240 volts RCCB (ELCB), having sensivity current up to 300 mA in the existing MCB DB complete with connection,testing & commissioning etc as reqd. |
| 126 | 25 Amp |
| 127 | 40 Amp |
| 128 | 63 Amp |
| 129 | Supplying and fixing following rating four pole (three phase & neutral) 415 volts RCCB (ELCB), having sensivity current up to 30 mA in the existing MCB DB complete with connection,testing & commissioning etc as reqd. |
| 130 | 25 Amp |
| 131 | 40 Amp |
| 132 | 63 Amp |
| 133 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 134 | Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V \\"C\\" curve TP MCB complete with connections, testing and commissioning etc. as required. |
| 135 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth metal enclosed plug top along with 20 amps ' C ' series SP, MCB, in the sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
| 136 | Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
| 137 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioningetc. as required. |
| 138 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single redcolour on front side as required. |
| 139 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. |
| 140 | For 6 way, Double door SPN MCBDB |
| 141 | For 8 way, Double door SPN MCBDB |
| 142 | For 10 way, Double door SPN MCBDB |
| 143 | For 14 way, Double door SPN MCBDB |
| 144 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing andcommissioning etc.as required. |
| 145 | For 6 way, Double door TPN MCBDB |
| 146 | For 8 way, Double door TPN MCBDB |
| 147 | For 10 way, Double door TPN MCBDB |
| 148 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required. |
| 149 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 150 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 151 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 152 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 153 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 154 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 155 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 156 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 157 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 158 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 159 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 160 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 161 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 162 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 163 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 164 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 165 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 166 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 167 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 168 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 169 | Earthing with G.I earth pipe 4.5 mtr long. 40 mm dia incluuding acessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 170 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 171 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 172 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 173 | Providing and fixing 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode with GI nut , bolt,spring washer excavation and refilling etc. as reqd. |
| 174 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required |
| 175 | Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required. |
| 176 | Providing & fixing 6 SWG dia GI wire on surface or in recess for loop earthing as reqd. |
| 177 | Laying of one no. PVC insulated, PVC sheathed / XLPE power cable of 1.1kV grade of size not exceeding 35 sq.mm. of 1.1kV grade of following place etc. as reqd. |
| 178 | direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 179 | In pipe |
| 180 | In open duct |
| 181 | On surface with MS clamp |
| 182 | Laying of one no. PVC insulated, PVC sheathed / XLPE power cable of 1.1kV grade of size exceeding 35 sq.mm. but not exceeding 95 sq.mm. of 1.1kV grade of following place etc. as reqd. |
| 183 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 184 | In pipe |
| 185 | In open duct |
| 186 | On surface with MS clamp |
| 187 | Laying of one no. PVC insulated and PVC sheathed /XLPE power cable (Size 95 sq.mm to 185 sq.mm) of 1.1kV grade of following place etc. as reqd. |
| 188 | In Ground I/c excavation, sand cushioning protective covering, refilling of earth as reqd. |
| 189 | In existing Pipe |
| 190 | In existing open duct |
| 191 | Fixing on surface with MS clamp |
| 192 | Laying of one no. PVC insulated and PVC sheathed /XLPE power cable (Size 185 sq.mm to 400 sq.mm) of 1.1kV grade of following place etc. as reqd. |
| 193 | In Ground I/c excavation, sand cushioning protective covering, refilling of earth as reqd. |
| 194 | In existing Pipe |
| 195 | In existing open duct |
| 196 | Fixing on surface with MS clamp |
| 197 | Supplying and making indoor end termination with brass compression gland, aluminum lugs for following size of PVC insulated & PVC sheathed/XLPE aluminum cable of 1.1kV grade as reqd. |
| 198 | 2x6 sq.mm. |
| 199 | 2x10 sq.mm. |
| 200 | 2x16 sq.mm. |
| 201 | 2x25 sq.mm. |
| 202 | 3½x25 sq.mm. |
| 203 | 3½x35 sq.mm. |
| 204 | 3½x 50/70 sq.mm. |
| 205 | 3½x 95 sq.mm. |
| 206 | 3½x 120 sq.mm. |
| 207 | 3½ X 150 sq. mm (50mm) |
| 208 | 3½ X 185 sq. mm (57mm) |
| 209 | 3½ X 240 sq. mm (62mm) |
| 210 | 3½ X 300 sq. mm (70mm) |
| 211 | 3½ X 400 sq. mm (82mm) |
| 212 | 4 X 10 sq. mm (25mm) |
| 213 | 4x16 sq.mm. |
| 214 | 4 X 25 sq. mm (28mm) |
| 215 | 4 X 35 sq. mm (32mm) |
| 216 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 217 | 2x16 sq.mm. |
| 218 | 2x25/35/50 sq.mm. |
| 219 | 3½x25/35/50 sq.mm. |
| 220 | 3½x70 sq.mm. |
| 221 | 3½x 95 sq.mm. |
| 222 | 3½x 120/150/185 sq.mm. |
| 223 | 3½ X 240 sq. mm |
| 224 | 3½ X 300 sq. mm |
| 225 | 3½ X 400 sq. mm |
| 226 | 4x16 sq.mm. |
| 227 | Supplying and embedding following dia G.l. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. |
| 228 | 40 mm dia |
| 229 | Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. |
| 230 | Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. |
| 231 | Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels. |
| 232 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 233 | 40 mm |
| 234 | 50 mm |
| 235 | 80 mm |
| 236 | 100 mm |
| 237 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar,bent to shape with hooked ends in R.C.C. slabs or beams during laying,including painting the exposed portion of loop,all as per standard design complete. |
| 238 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 239 | Supplying and fixing following piano type switch /socket on existing switch box/cover I/c connection etc as reqd. |
| 240 | Fan regulator socket type rotary/dimmer |
| 241 | Fan regulator dimmer type 650 W |
| 242 | Supply and drawing PVC insulated 3 core round cable of following size for connection of equipments / exhaust fan & other work as reqd. |
| 243 | 1.5 Sq. mm |
| 244 | 2.5 Sq. mm |
| 245 | 4.0 Sq. mm |
| 246 | Supply and drawing PVC insulated 5 core round cable of 6.0 Sq. mm size for 3 phase connection as reqd. |
| 247 | Drawing of optical cable enhanced cat 5/cat 6/telephone/ networking /power cable in existing steel conduit pipe/GI /HDPE pipe including numbering of networking wire from room to rack as reqd. |
| 248 | Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as reqd. |
| 249 | 2 x 10 Sq.mm.. |
| 250 | 3 x 10 Sq.mm.. |
| 251 | 2 x 16 Sq.mm.. |
| 252 | 3 x 16 Sq.mm.. |
| 253 | 4 x 25 Sq.mm.. |
| 254 | 4 x 35 Sq.mm.. |
| 255 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in DLP/ PVC casing & capping, without switch,switch box etc. and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 256 | Group B |
| 257 | Group C |
| 258 | Providing and fixing following sizes of PVC casing and capping on surface as reqd. |
| 259 | 20 x 12 mm |
| 260 | 25 x 16 mm |
| 261 | 32x 16 mm |
| 262 | 38 x 16 mm |
| 263 | Providing and fixing casing and capping in place of defective and dameged wood batten including dismentling of betten and wire & relaying of wires as required complet. |
| 264 | 20 x 12 mm |
| 265 | 25 x 16 mm |
| 266 | 32x 16 mm |
| 267 | 38 x 16 mm |
| 268 | Dismantling the old conduit pipe/wood batten of all sizes from surface/recessed & making good the damages I/c filling the holes of the surface etc as reqd. |
| 269 | Fixing 20/25/32 mm conduit pipe on surface with clamp/in recessed only conduit pipe supplied by department.(Free of cost) |
| 270 | Supplying and fixing wooden board of following sizes on surface or in recessed with suitable size of phenolic laminated sheet cover in the front etc as reqd. |
| 271 | 100 mm x 100 mm |
| 272 | 175 mm x 100 mm |
| 273 | 200 mm x 150 mm |
| 274 | 200 mm x 250 mm |
| 275 | 200 mm x 300 mm |
| 276 | Dismantling conciled & damaged DB/TPN Switches/starter/ loose wire boxes along with all accessories and depositing the same in the store repairing the damages as reqd complete. |
| 277 | Dismantling and refixing of M.S./PVC box of up to 250 x 300 x100 on surface recessed as required. including painting with enamel paint as reqd |
| 278 | Fixing MS Box upto 250 x 300 x100 mm including pole fuse box and painting. with enamel paint as reqd |
| 279 | Supplying and fixing 40 amp to 63 amp rating 240 volts 'C' curve 10 kA MCB of following pole in the existing MCB DB complete with connection, testing & commissioning etc as reqd. |
| 280 | Single Pole |
| 281 | Double pole |
| 282 | Triple Pole |
| 283 | Four Pole |
| 284 | Supply, fixing, connecting, commissioning & testing of 40 watt LED Post top lantern light complete with all accessories including rag bolts with washer etc as reqd. |
| 285 | Supply, fixing, connecting, commissioning & testing of 45/48 watt LED Street light make up of pressure die aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 66 protection complete with all accessories including rag bolts with washer etc as reqd. |
| 286 | Supply and installation testing and commissioning of following LED fitting surface/recess mounted, IP20, with metallic CRCA powder coated housing cover highefficiency diffuser, THD less than10, power factor above 0.9.etc. as required Crompton make. |
| 287 | 12W LED light 1\\"X1\\" or round cat no. LCDSPLN-R-12-CDL |
| 288 | 18W LED light 1\\"X1\\" or round cat no. LCDSPLN-R-18-CDL |
| 289 | 36/40W LED light 1\\"X4\\" long ress/surface mounting fitting |
| 290 | 36W LED light 2\\"X2\\" cat no. LCTLSNE-36-FO-CDL |
| 291 | 10/20 W LED Bulkhead Cat. No. (CIS-306-10-57-SL-DP-NBK ) |
| 292 | Supplying, fixing, connecting, commissioning and testing of the following luminaries light fixtures complete with all accessories and with lamp as required complete. |
| 293 | LED tube light fitting (18 / 20 Watt. LED) surface mounting luminares |
| 294 | Supplying, fixing, connecting, commissioning and testing of the following luminaries light fixtures complete with all accessories and without lamp as required complete. |
| 295 | Drum light . |
| 296 | Wall bracket |
| 297 | Repairing , cleaning, testing & commissioniong box /industiral type /decorative type fitting I/c replacement of all parts if reqd. |
| 298 | Supply and fixing and connecting & commissioning following CFL / LED/ lamps in existing fitting as reqd.(Make- Phillips) |
| 299 | LED picture lamp |
| 300 | LED bulb 7 to 9W |
| 301 | LED bulb 14/15W |
| 302 | LED bulb 20/23 W |
| 303 | LED tube light 18 / 20 Watt. |
| 304 | Dismantling, disconnecting old damaged unserviceable fl fitting/ exhaust fan/ ceiling fan/ bulkhead fitting with bracket etc. as reqd. and depositing in sectional store. |
| 305 | Supplying and fixing Copper/Al tube / lug reducer terminals suitable for following size of conductor. |
| 306 | 6 Sq.mm. |
| 307 | 10 Sq.mm. |
| 308 | 16 Sq.mm. |
| 309 | 25 Sq.mm. |
| 310 | 35 Sq.mm. |
| 311 | 50 Sq.mm. |
| 312 | Dismantling & refixing brass compression type cable gland 25 sq.mm to 400 sq.mm. cable. |
| 313 | Supplying of one number XLPE power cable of following size. aluminium conductor, steel armoured cable of 1.1kV grade as per IS:7098 as reqd complete. |
| 314 | 2x6 sq.mm. |
| 315 | 2x10 sq.mm. |
| 316 | 2x16 sq.mm. |
| 317 | 2x25 sq.mm. |
| 318 | 3½x25 sq.mm. |
| 319 | 3½x35 sq.mm. |
| 320 | 3½x 50 sq.mm. |
| 321 | 3½x 70 sq.mm. |
| 322 | 3½x 95 sq.mm. |
| 323 | 3½x 120 sq.mm. |
| 324 | 3½ X 150 sq. mm |
| 325 | 3½ X 185 sq. mm |
| 326 | 3½ X 240 sq. mm |
| 327 | 3½ X 300 sq. mm |
| 328 | 3½ X 400 sq. mm |
| 329 | Digging cable trench, lifting brick & cable for locating fault and relaying the cable i/c refilling the trench, extra sand if required shall be i/c in the item of following size. as required. |
| 330 | not exceeding 35 sq.mm.. |
| 331 | exceeding 35 sq.mm.. but not exceeding 95 sq.mm. |
| 332 | exceeding 95 sq.mm.. but not exceeding 185 sq.mm. |
| 333 | exceeding 185 sq.mm.. but not exceeding 400 sq.mm. |
| 334 | Digging trench for taking out cable and refilling , watering ,ramming the same after taking out cable as reqd complete. |
| 335 | Lifting & removing cable of following sizes from trenches or clamped on surface, making roll depositing the same in the store I/c cartage etc as reqd. |
| 336 | Up to 35 sq.mm. |
| 337 | Above 35 sq.mm. to 95 sq.mm. |
| 338 | Exceeding 95 sq.mm.. but not exceeding 185 sq.mm. |
| 339 | Exceeding 185 sq.mm.. but not exceeding 400 sq.mm. |
| 340 | Supply and laying of HDPE pipe ISI mark of 25 mm (8Kg / cm²) size inner dia, 2mm thick I/c cartage loading & unloading etc. as reqd. |
| 341 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 342 | In pipe |
| 343 | In open duct |
| 344 | On surface with MS clamp |
| 345 | Supply and laying of HDPE pipe ISI mark of 32 mm (8Kg / cm²) size inner dia, 2mm thick I/c cartage loading & unloading etc. as reqd. |
| 346 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 347 | In pipe |
| 348 | In open duct |
| 349 | On surface with MS clamp |
| 350 | Supply and laying of HDPE pipe ISI mark of 40 mm (8Kg / cm²) size inner dia, 2mm thick I/c cartage loading & unloading etc. as reqd. |
| 351 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 352 | In pipe |
| 353 | In open duct |
| 354 | On surface with MS clamp |
| 355 | Dismantling and refixing of switch / socket /regulator I/c cleaning, connecting, commissioning etc as reqd. |
| 356 | Supply fixing connecting & commissioning of following rating 3 pin Plug top as reqd complete. |
| 357 | 5/6 Amp |
| 358 | 15/16 Amp |
| 359 | Supplying and fixing 20 Amp. metal clad socket (20 A 2P+E) etc. complete as required. |
| 360 | Supplying and fixing 20 Amp. 2P+E plug top.etc. complete as required. |
| 361 | Supply, Installation, testing & commissioning of 400mm sweep AC 230/250 volts, 50 Hz wall mounting revolving fan with brackets etc complete. |
| 362 | Supply, Installation, testing & commissioning of AC ceiling fan of following sweep 220 volts without regulator I/c wiring the down rods of standard length up to 30 cm with 1.5 sq.mm. PVC insulated copper conductor single core cable etc as reqd. |
| 363 | 1200 mm |
| 364 | 1400 mm |
| 365 | Supply, Installation, testing & commissioning of heavy duty exhaust fan, 900 rpm 220 volt AC, 50 Hz of following sweep in the existing opening I/c connection, testing, commissioning etc as reqd. |
| 366 | 300 mm |
| 367 | 380 mm |
| 368 | 450 mm |
| 369 | Supplying and fixing Exhaust fan shutter for following sizes exhaust fan on rag bolts as reqd. |
| 370 | 300 mm |
| 371 | 380 mm |
| 372 | 450 mm |
| 373 | Making hole on wall for following size exhaust fan and finishing the same as required. |
| 374 | 300 mm |
| 375 | 375/380 mm |
| 376 | 450 mm |
| 377 | Fixing & connecting 1/3 ph temporary service connection from supply source to desired place up to the lead of 50 Mtr. And dismantling the same form source i/c to & fro cartage. ( extension board and cable will be supplied by the dept.) |
| 378 | Supplying and fixing bakelite sheet 6 mm thick complete with required nuts & bolts as reqd. |
| 379 | Supplying and fixing 3 mm thick phenolic laminated sheet on existing board with brass screw & cup washer etc as reqd. |
| 380 | Locating fault in the cable lines with fault Locating matchine etc and rectifying removing & restoring the same and making good the damages etc as required. |
| 381 | Locating fault in the cable lines with meager etc. and rectifying removing & restoring supply the same & making good the damages etc as reqd. |
| 382 | Locating fault in wiring rectifying removing & restoring supply the same & making good the damages etc as reqd. |
| 383 | Fixing of RJ-45 modular box with cover plate or I/o box for internet on surface/ recessed cutting the wall making good the same as required. ( box and cover plate will be supplied by dept.) |
| 384 | Dismentaling and refixing of wooden board of any sizess on surface or in recessed etc as reqd. |
| 385 | Supplying and fixing of Cat 6 IO RJ-45 Jack (Plastic Housing- Thermoplastic UL94V-0 rated or equivalent, Operating Life- Minimum 20 re-terminations, Contact Material- Copper Alloy, IDC Contact Plating-Tin/Lead Plate, Wire Accommodation-22-24 AWG solid, certification-Should be covered by UL/ETL certification program.) for connecting Cat 6 wire as required. |
| 386 | Supplying and fixing of Cat 6 UTP patch cord 4 feet blue (Commercial Standards- ISO/IEC 11801:2002/Amd 2:2010 Cat 6‐, TIA‐568‐C.2 Cat 6) etc. as required. |
| 387 | Supplying and Fixing of RJ-45 Mounting Box/ Back box for Face plate (manufactured by OEM or sample may approve by IIT Kanpur) on surface/ recessed cutting the wall making good the same as required. |
| 388 | Supplying and Fixing of Cat 6 RJ-45 Face plate Simplex fixed after wire panched with jack (Screw hole covers – to be supplied with plate, Plug in Icons – Icon tree – to be supplied with plate, Should be able to support variety of jacks – UTP, STP, Fiber, Coax etc.) as required. |
| 389 | Providing and fixing DLP plastic trunking of size 105 mm x 50 mm without cover on surface as reqd. |
| 390 | Providing and fixing DLP plastic trunking of size 105 mm x 50 mm accessories on surface as reqd. |
| 391 | PVC trunking full cover of size 85 mm size |
| 392 | End cap |
| 393 | Internal angle. |
| 394 | External angle |
| 395 | flat angle |
| 396 | cover joint |
| 397 | Base joint |
| 398 | separation partitions |
| 399 | flat junction |
| 400 | Supplying, installation DLP mini- trunking 32mm x 20mm and accessories white-system with independent cover- without central partion etc. as reqd. |
| 401 | Mini- trunking |
| 402 | End cap left or right |
| 403 | Internal/ external angle |
| 404 | Flat angle |
| 405 | Flat junction |
| 406 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 407 | Supplying,installation,testing & commissioning of 10-60 amp. Digital type Single phase 2 wire 50Hz,Energy Prepaid/Post-paid meter with LCD display for dual register meter type,10-60 amp,class 1.0 Accuracy as per IS:13779 IS:16444 (Part/Part2) ammended upto date with RS485 communication port suitable for prepaid metering,with cut off system with Line/Load manager & interface for online monitoring with including AMR (Automatic Meter Reading) software Database integration software capable of communication with each Data Acquistion Hub to collect Data of each meter & generating an approved format electricity bill & centralized control with low voltage & high voltage protection .The software shall have the capability to take in to account the dual tariff (Grid Supply & DG Supply) the software shall be compatible with windows based operating system.Display all energy parameters like KWH & KVAH,Load setting,phase wire voltage/current frequency as per standred.i/c dismentling of old existing meter and deposite the same safely in departmental store complete as reqd.(Make: Neptune,Secure,L&T EnerSmart) |
| 408 | Supplying,installation,testing & commissioning of 10-60 amp. Digital type Three phase 4 wire 50 Hz,Energy Prepaid/Post-paid meter with LCD display for dual register meter type,10-60 amp,class 1.0 Accuracy as per IS:13779 IS:16444 (Part/Part2) ammended upto date with RS485 communication port suitable for prepaid metering,with cut off system with Line/Load manager & interface for online monitoring with including AMR (Automatic Meter Reading) software Database integration software capable of communication with each Data Acquistion Hub to collect Data of each meter & generating an approved format electricity bill & centralized control with low voltage & high voltage protection .The software shall have the capability to take in to account the dual tariff (Grid Supply & DG Supply) the software shall be compatible with windows based operating system.Display all energy parameters like KWH & KVAH,Load setting,phase wire voltage/current frequency as per standred.i/c dismentling of old existing meter and deposite the same safely in departmental store complete as reqd.(Make:-Neptune,Secure,L&T EnerSmart) |
| 409 | Supplying & Fixing metal enclosure with aluminium busbar including fixing clamp suitable for XT1 TP/FP MCCB 63 to 250ER as reqd. |
| 410 | Supplying and fixing metal enclosure suitable for DP/TPN MCB / DP ELCB on surface or recessed etc as reqd. |
| 411 | S & F of following size of steel flexible pipe alongwith the accessories on surface/open duct as required. . |
| 412 | Overhauling of following fan of any size including dismantling and refixing of fan, bearings, checking, cleaning the all parts and supplying & replacement of rubber real, rubber rings, nut bolts, hanger clamps, bearing plates, cotter/ split pin, varnishing if reqd etc, reassembling testing and commissioning of fan as reqdired complete. |
| 413 | ceiling fan |
| 414 | Exhaust fan |
| 415 | Supplying and fixing following capacity capacitor suitable for ceiling fan / exhaust fan / air-curtain etc. |
| 416 | 2.5 mfd |
| 417 | 4.0mfd |
| 418 | 8.0 mfd |
| 419 | Dismantling & refixing of any size fan from normal height etc. as required. |
| 420 | ceiling fan |
| 421 | Exhaust fan |
| 422 | Repairing of housing of bearing side /bush side /in fan body in ceiling fan /exhaust fan/ rally fan etc. |
| 423 | Cartage of Ceiling fans and regulator / exhaust fan From store to site as reqd. |
| 424 | Supplying of following numbers ball bearings NBC. |
| 425 | 6201 ball bearing |
| 426 | 6202 ball bearing |
| 427 | 6203 ball bearing |
| 428 | 6204 ball bearing |
| 429 | 6205 ball bearing |
| 430 | Cleaning of ceiling fan with detergent at site and replacement of damaged items i.e. rubber real, cotter pin, capacitor clamp, nut and bolts of hanger clamps etc as required. |
| 431 | Supplying and fixing following size/ modules, Plastic/ PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. Make- legrand. |
| 432 | 1/2 module (75mm X 75mm) |
| 433 | 3 module (100mm X 75mm) |
| 434 | 4 module (125mm X 75mm) |
| 435 | 6 module (200mm X 75mm) |
| 436 | 8 module (125mm X 125mm) |
| 437 | 12 module (200mm X 150mm) |
| 438 | S&L, connecting and commissioning following 5 pairs jelly filled armoured telephone cable PVC insulated and PVC sheathed annealed tinned copper conductor. |
| 439 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 440 | In pipe |
| 441 | In open duct |
| 442 | On surface with MS clamp |
| 443 | S&L, connecting and commissioning following 10 pairs jelly filled armoured telephone cable PVC insulated and PVC sheathed annealed tinned copper conductor. |
| 444 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 445 | In pipe |
| 446 | In open duct |
| 447 | On surface with MS clamp |
| 448 | S&L, connecting and commissioning following 20 pairs jelly filled armoured telephone cable PVC insulated and PVC sheathed annealed tinned copper conductor. |
| 449 | Direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 450 | In pipe |
| 451 | In open duct |
| 452 | On surface with MS clamp Please Enable Macros to View BoQ information |
