|
| 1 | A) Erection Part |
| 2 | Erection of S.T Single Pole Str. 11 Mtr. Long :- Digging of Pit fixing of insulator, disc and drilling of holes in X-Arm , Bracing Set, Top Clamp, erection of pole, fixing of barbed wire and danger plate, filling of Pit , Alluminium Paint and ramming & painting of poles complete in all respect. |
| 3 | Erection of Double Str Pole Str. 11 Mtr. Long :- Digging of Pit fixing of insulator, disc and drilling of holes in X-Arm , Bracing Set, Top Clamp, erection of pole, fixing of barbed wire and danger plate, filling of Pit ,G.O. Switch, Alluminium Paint and ramming & painting of poles complete in all respect. |
| 4 | Stringing and sagging conductor:- Laying of conductor stringing and sagging, binding with insulator complete in all respect. |
| 5 | Laying of G.I Wire, Stringing, Sagging and binding complete in all respect. |
| 6 | Fixing of earthing pipe of pit for coal earthing, fixing of G.I wire to system filling of pit and remaning work complete in all respect. |
| 7 | Erection of Stay Set HT:- Digging of Pit fixing of Stay Rod, filling of Pit, Nozeiling & Tightning complete in all respect. |
| 8 | Inspection fees for initial or peroodical inspection for 11kv HT Line |
| 9 | Providing manual carriage and transportation of departmental materials from Central Store to the work site by the contractor at his own arrangement, including loading, unloading, handling, stacking, labour, tools & plants, transportation vehicles, fuel, watch and ward, and all other incidental charges complete in all respects as directed by the Engineer-in-Charge. |
| 10 | ERECTION PART 11/0.4kV,63 KVA Sub-Station |
| 11 | Erection of 63 kva S/Stn. Str.:-Digging of Pit for S/T Pole and earthing, drilling of holes in X-arm, preparation of plate form str. Member CI, Alluminium Paint AI i.e X-arml, Knee bracing set, erection of D-pole,errection of plate form, ercetion of x-Arm, drop out, fuse unit, linghting arrestor, MCCB Switch of LT Box, Energy Meter, Erection of T/F, and earthing conn. to T/F G.O Switch lightning etc. erection of Stay Set, Erection of Jumper, Pipe earthing 3 Nos., Erection of LT cable, brabed wire and painting, 3 Nos. earthing to S/Stn. by prov. 50Kg Salt charcole in each earthing i/c construction of trench for earthing as per REC Board Standard complete in all respect. |
| 12 | Providing manual carriage and transportation of departmental materials from Central Store to the work site by the contractor at his own arrangement, including loading, unloading, handling, stacking, labour, tools & plants, transportation vehicles, fuel, watch and ward, and all other incidental charges complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Inspection fees for initial or peroodical inspection for 11/0.4kv,63 kva Sub-Station. |
| 14 | SUPPLY PART. 11kV HT Line |
| 15 | Prov. Steel Tublar 11 mtr long with cap. |
| 16 | Prov. RCC Muff |
| 17 | Prov.AAAC 7/3.81 mm Conductor (PROVIDED BY HPSEBL) |
| 18 | Prov.G.I.Wire No. 8 SWG in mtr. |
| 19 | Run Through Str. ( ∆) Formation on Singlr Pole Str. |
| 20 | Prov. Cross Arm (Channel Iron (100x50x6) Length 1270 mm |
| 21 | Prov. Angle Iron (50x50x6mm) Leggth 750 mmx2 |
| 22 | Prov. Pole Top Bracket (MSCI) (100X50X6 mm) Length 100 mm |
| 23 | Dead End Str. |
| 24 | Prov Belt Set Angle Iron (50x50x6) Length 1800mm x2 Nos. |
| 25 | Prov.X-Bracing Set.MS Angle Iron (50x50x6 mm) Length 2125 mm x2 Nos. |
| 26 | Prov.X-Arm (Horizontal) MS-Channel Iron (100x50x6mm) Length 2340 mm x2 Nos. ( ∆) Formation |
| 27 | earth wire |
| 28 | Prov. MS Angle Iron (50x50x6 mm) Length 2800 mm |
| 29 | For G.O. Switch and D.O. Fuse |
| 30 | MS Channel Iron (75x40x6 mm) Length 2800 mm for holding the 11kv G.O.Switch handle |
| 31 | G.O. Switch Handle Supporting (Channle Iron 75x40x6 mm) Length 460mm |
| 32 | Prov.Nuts and Bolts of Various Sizes |
| 33 | Prov.MS Half Clamp |
| 34 | Prov.MS Full Clamp |
| 35 | Prov.Barbed Wire |
| 36 | Prov.Eye/Earth Hook |
| 37 | Prov.11kv Disc Insulators complete for double pole str in all respect |
| 38 | Prov.11kv Pin Insulator with pin complete in all respect |
| 39 | Prov.11kv Stay Set |
| 40 | Prov. Stay Wire (7/3.15 mm) (10 kg. per Stay Set) |
| 41 | Prov.11kv Earthing set complete in all respect. |
| 42 | Prov.Red Oxide (1.5 Ltr. Per Pole) |
| 43 | Prov.Alluminum Paint |
| 44 | Prov.11kv Danger Plate (250x200x1.6 mm) |
| 45 | Prov. 11kv G.O.Switch complete. |
| 46 | Prov. 11kv D.O.Fuse unit. |
| 47 | SUPPLY PART |
| 48 | Supply PART 11/0.4kV,63 KVA Sub-Station |
| 49 | Distribution Transformer (Ordinary) 11/0.4 KV, 63 KVA (Provided By HPSEBL) |
| 50 | Steel Tubular Poles (9 m, Working load>200Kgf/m2) |
| 51 | Muffs with concrete filling |
| 52 | X-Arm (Channel Iron (100X50X6mm) Length 2800mm X 2 No's) for incomer Line. |
| 53 | MS Angle Iron (50X50X5mm) Length 2800mm x1 No's for LA's . |
| 54 | X-Arm (Channel Iron (75X40X6mm) Length: ( 2800mm x 4 No's) for supporting DO fuse unit & GO switch |
| 55 | Providing and Fixing wooven mesh fencing along with Gate & locking arrangement (for more detail check attached drawing and measurement detail) |
| 56 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
| 57 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 58 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 59 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 60 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia 4 mm |
| 61 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x58x1.90 mm |
| 62 | Providing and fixing ISI markedoxidisedM.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 63 | Transformer Belting & Knee Bracing |
| 64 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
| 65 | X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer] |
| 66 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 67 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
| 68 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
| 69 | Transformer LT Distribution Box and GO Switch fixing Assembly |
| 70 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x 2 Nos |
| 71 | MS Angle Iron (50X50x6 mm), Length: (450 mm) x 1 Nos |
| 72 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length: 460 mm |
| 73 | GO AB Switch Unit (11kV, 400A, 25 KA) Tripple pole O/D type |
| 74 | D.O Fuse Unit |
| 75 | Surge Arrester, 9 kV Station Class (Porcelain Type) |
| 76 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 77 | Stay set complete |
| 78 | Stay Wire (7/3.15 mm) (7.0 kg per Stay Set) |
| 79 | Pipe Earthing Set |
| 80 | LT Distribution Panel Box with MCCB (160A, 10 kA, 4P,1 no) and MCCB (SFU 32 A 5No. rewirable) |
| 81 | Half Clamp (M.S. Flat 50X6 mm) |
| 82 | Full Clamps (M.S. Flat 50X6 mm) |
| 83 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 84 | Aluminium Thimble |
| 85 | Aluminium Thimble |
| 86 | Danger Plate |
| 87 | Barbed Wire |
| 88 | LT Cable (3.5 Core) 70 mm² outgoing |
| 89 | LT Cable (3.5 Core) 120 mm² Incoming |
| 90 | Smart Meter for 63KVA Transformer. (Provided By HPSEBL) |
| 91 | Aluminium Paint. |
| 92 | HP ProOne 440 23.8-inch G9 (Intel i5 Processor), 23” or higher All-in-One Desktop PC (1.) Processor-(Intel Core i5 13500 Processor: Core- 14 Thread- 20 Cache- 24 MB Base Power-65 W Or higher/latest). (2.) Chipset- Q series. (3.) Operating System- Windows 11 Pro 64-bit factory preloaded. (4.) Out of Band Management- Intel vPro. (5.) Memory-8 GB DDR5-4800 MHz or higher expandable up to 64 GB or higher, having 2 DIMM Slots. (6.) Processor Generation-13th Generation or higher. (7.) Storage-512 GB NVMe SSD or higher (8.) Optical Device- DVD R/W drive (Optional). (9.) Graphics- Intel Integrated HD Graphics. (10.) Webcam- FHD 5MP webcam. (11.) Security- TPM 2.0.(12.) Connectivity-802.1 1b/g/n/ac/ax 802.11bgn, Bluetooth 5.0.(13.) I/O Ports- (5) USB 3.2 (1) Combo Jack Microphone/Headphone (1) USB-C © 3.2 (1) DisplayPort 1.4a (1) HDMI Port 1.4b Card Reader) (14.)- Green Certifications- Energy Star Certified/ EPEAT Registered/ RoHS/WEEE/REACH/BIS. (15.) Keyboard-104 Keys OEM English USB Keyboard same brand as that of PC (16.) Mouse- Plug-and-play USB mouse same brand as that of PC. (17.) Speaker- Internal speaker. (18.) Monitor- 23.8” (19) Warranty- Three years comprehensive onsite warranty. (20.) Additional features- Intrusion Sensor (integrated in the system board, can be enabled/ disabled through BIOS), HP Support Assistant, HP Smart Support, HP Sure Start, HP Tamper Lock, HP Sure Admin, HP Secure Erase. with printer and Computer Table Please Enable Macros to View BoQ information |
