|
| 1 | Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed. |
| 3 | M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:4 complete all as specified and directed. |
| 4 | Do as per above item No. 3 but except brick complete all as specified and directed. |
| 5 | M&L for cement concrete type B0 1:2:4 ( using 20 mm graded aggregate) as in copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work /concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in as sub base of interlocking/chequred tiles complete all as specified and directed. |
| 9 | M&L for sand filling under floors including watering & consolidation concrete complete all as specified and directed. |
| 10 | M&L for Machine pressed precast concrete interlocking coloured(Red/Yellow) paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete with grey cement and pigment complete all as specified and directed. (Note:-Colour approved by Engr-in-charge) |
| 11 | M&L for chequered cement concrete tiles 300X300X25 mm thick of approved coloured (Red/Yellow) jointed and pointed in neat cement slurry in with grey cement and pigment over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 12 | M&L for providing cement concretetype B1 1:2:4 ( 20 mm graded aggregate) in roof kerb or mud stops rounded or chermfered edge complete all as specified and directed. |
| 13 | Cleaning of existing drain of any size including removing of mud clay, bushes, grass vegatable, roots etc and removing from site of unit area complete all as specified and directed. |
| 14 | Dismenteling post or struts ( wood steel, RCC ) any section including taking out embeded portion in concrete etc and making good disturbed ground. |
| 15 | Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface complete all as specified and directed. |
| 16 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 17 | S&F mild steel posts and struts in fencing , flat iron as in wind ties for roof including securing bolts, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 18 | Taking down old u/s barbed wire in fencing complete all as specified and directed. |
| 19 | Supply only Chain link MS galvanisd fencing of any dia wire, any mesh size made into mattresses laped wired laid in position complete all as specified and directed.(Note :-Weight decided by BOO) |
| 20 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight n exc 4 Kg per Sqm metre complete all as specified and directed. |
| 21 | M & L for 10 mm dia round bars ( FE - 410 W Gde E 250 uality A or Fe 250 ( Gde E-165) and over deformed or twisted bars cut to length bent to shape reqd incl cranking, bending, hooking ends and binding with mild steel wire (anealed) not less than 0.9 mm dia as in line bars for securing chain link fence etc. |
| 22 | S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not, exc 30cm long (diameter of neck in mm exc 12 not exc 20). |
| 23 | M&L for preparation of new or previously untreated surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces & applying 1mm thick wall careputty, a coat of primer & two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed. |
| 25 | M&L for washing rubbing down preparing and stopping of old plastered surfaces of wall, removing nails, making good holes, cracks etc and applying one coat of cement base paint at any height, complete all as specified and directed. Please Enable Macros to View BoQ information |
