|
| 1 | 1) Removal of existing unserviceable/broken wooden/steel/PVC part from furniture article carefully without disturbing the adjoining parts.Supply and fixing new parts as per given specification and drg after tightening the joints by arc/gas welding making every part in-tact including painting the entire article with standard workmanship and as directed by GE. All furniture items is to be painted only after making the entire items intact by tightening the joints.2). Work will be executed inside BS yard of GE Nagrota and at various sites as per requirement.3). All steel sections shall be as per standard IS .4). Plywood/MDF shall be BWR grade-A /exterior grade of approved make/brand and shall confirm to IS-303. 5). All other material to be incorporate in the work shall be of latest IS standard specification.6). Painting shall only be done with spray machine only.7). Painting will only be caried out after removing/peeling the existing paint by using paint remover. |
| 2 | ALMIRAH LARGE STEEL, FD-67(M)/ 1031:- |
| 3 | Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge complete all as specfied & directed and as shown on drawing. |
| 4 | Removing UNSV lock from shutters of almirah large steel; S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 5 | Removing UNSV handle from almirah steel large, S&F new 130mm long chromium plated handle to steel shutters, complete all as specfied & directed and as shown on drawing. |
| 6 | Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape complete all as specfied & directed and as shown on drawing. |
| 7 | Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding complete all as specfied & directed and as shown on drawing. |
| 8 | Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts. S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as specfied & directed and as shown on drawing. |
| 9 | Spot gas welding complete all as specified and directed. |
| 10 | Completely removing all dents from almirah by smooth hammering, preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by GE after application of red oxide primer. The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 11 | ALMIRAH LARGE STEEL,FD/E6/MAP/18 :- |
| 12 | Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge complete all as specfied & directed and as shown on drawing. |
| 13 | Removing UNSV lock from shutters of almirah large steel; S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 14 | Removing UNSV handle from the almirah steel large, S&F new 130mm long chromium plated handle to steel shutters, complete all as specfied & directed and as shown on drawing. |
| 15 | Removing UNSV lock from internal safe of almirah large steel; S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 16 | Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding complete all as specfied & directed and as shown on drawing. |
| 17 | Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as specfied & directed and as shown on drawing. |
| 18 | Spot gas welding complete all as specified and directed. |
| 19 | Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 20 | ALMIRAH MEDIUM STEEL WITH SHELVES,FD-67(M)/1032 |
| 21 | Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1mm thick MS sheet of same size and shape duly fixed to almirah steel Medium with new 80mm long MS hinge complete all as specfied & directed and as shown on drawing. |
| 22 | Removing UNSV lock from shutters of almirah steel Medium S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 23 | Removing UNSV handle from the almirah steel Medium, S&F new 130mm long chromium plated handle to steel shutters, complete all as specfied & directed and as shown on drawing. |
| 24 | Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape complete all as specfied & directed and as shown on drawing. |
| 25 | Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1mm thick MS sheet of same size and shape complete all as specfied & directed and as shown on drawing. |
| 26 | Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as specfied & directed and as shown on drawing. |
| 27 | Spot gas welding complete all as specified and directed. |
| 28 | Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by GE after application of red oxide primer. The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 29 | BOOK CASE STEEL GLAZED , FD-1028:- |
| 30 | Removing UNSV lock from shutters of book case steel, S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 31 | Removing UNSV handle from book case steel ,S&F new 130mm long chromium plated handle to each openable shutter, complete all as specfied & directed and as shown on drawing. |
| 32 | Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape complete all as specfied & directed and as shown on drawing. |
| 33 | Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding complete all as specfied & directed and as shown on drawing. |
| 34 | Removing UNSV leg from bottom of book case steel carefully by unriveting and using hand held cutting machine without damaging the other parts. S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as specfied & directed and as shown on drawing. |
| 35 | Completely removing all dents from book case by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete book case as per approved colour/shade by GE after application of red oxide primer. The painting to each article shall only be carried out by spray machine only complete all as specfied and directed. |
| 36 | CHAIR COMPUTER, FD/E6/MAP/01 / PCH-7001D /TP:- |
| 37 | Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker. The seat and back shall also be covered with plastic transparent film complete all as specified and directed. |
| 38 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping. S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape, the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker and complete seat and back shall be covered with transparent polythene wrap complete all as specified and directed. |
| 39 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size , made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed. |
| 40 | Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer complete all as specified and directed. |
| 41 | Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer complete all as specified and directed. |
| 42 | Removing unserviceable hydraulic gas lift cylinder of chair, S&F new hydraulic gas lift cylinder to chair complete all as specfied & directed and as shown on drawing. |
| 43 | Painting to all steel portion of chair computer with one coat of chrome paint or as directed by Engr-in-Charge after cleaning, dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth complete all as specfied and directed |
| 44 | CHAIR WRITING ,FD/E6/MAP/12:- |
| 45 | Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker. The seat and back shall also be covered with plastic transparent film complete all as specified and directed. |
| 46 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and directed. |
| 47 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed. |
| 48 | Painting to all steel portion of chair writing with one coat of synthetic enamel black paint or as directed by Engr-in-Charge after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth complete all as specified and directed. |
| 49 | CHAIR EXECUTIVE REVOLVING/ CONFERENCE,TP:- |
| 50 | Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film complete all as specified and directed. |
| 51 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and directed. |
| 52 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed. |
| 53 | Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth complete all as specfied & directed and as shown on drawing. |
| 54 | LOCKER STEEL, FD-257/1029:- |
| 55 | Removing UNSV/damaged door shutter carefully by removing the hinges and S&F new shutter made of 1 mm thick MS sheet of same size and shape complete all as specfied & directed and as shown on drawing. |
| 56 | Removing UNSV/damaged shelf carefully by removing the rivets and welding spots and S&F new shlef made of 1 mm thick MS sheet of same size and shape complete all as specfied & directed and as shown on drawing. |
| 57 | Removing the existing unserviceable rusted conduit pipe from the side flanges, S&F new 20mm dia conduit pipe along with side flanges complete all as specfied & directed and as shown on drawing. |
| 58 | Removing UNSV handle from both shutters of locker steel and S&F new 100mm long chromium plated steel handle of ISI marked with riveting to both steel shutters, complete all as specfied & directed and as shown on drawing. |
| 59 | Removing the existing unserviceable hasp and staple from locker steel and S&F new hasp and staple of size 75mmx40mm of 3mm thickness with riveting to steel shutters complete all as specfied & directed and as shown on drawing. |
| 60 | Removing UNSV leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts. S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as specfied & directed and as shown on drawing. |
| 61 | Continous gas welding to all broken joints of table in length of 1 cm complete all as specfied and directed. |
| 62 | Completely removing all dents from locker by smooth hammering ,preparing the locker by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete locker as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specfied and directed. |
| 63 | RACK SHOE STEEL, FD/E6/MAP/02(R) :- |
| 64 | Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine, S&F new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position complete all as specfied & directed and as shown on drawing. |
| 65 | Removing UNSV wire mesh (Jali) shelves, S&F new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position complete all as specfied & directed and as shown on drawing. |
| 66 | Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg complete all as specfied & directed and as shown on drawing. |
| 67 | Continous gas welding to all broken joints of table in length of 1 cm complete all as specfied and directed. |
| 68 | Completely removing all dents from rack shoe by smooth hammering ,preparing the rack shoe by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of black paint as per existing shade shall be applied externally and internally to complete rack shoe after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 69 | TABLE OFFICE OFFICER STEEL, FD-1003:- |
| 70 | Removing UNSV top ; S&F new top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around duly fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 71 | Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front complete all as specfied & directed and as shown on drawing. |
| 72 | Removing UNSV lock from drawers and shutters ; S&F new 6 lever lock with duplicate keys. complete all as specfied & directed and as shown on drawing. |
| 73 | Removing the old broken PVC shoes from the legs of table, S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom complete all as specfied & directed and as shown on drawing. |
| 74 | Continous gas welding to all broken joints of table in length of 1 cms complete all as specified and directed. |
| 75 | Completely removing all dents from table by smooth hammering, preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 76 | TABLE OFFICE CLERK STEEL,FD-84(M)/1004 :- |
| 77 | Removing UNSV top carefully; S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 78 | Removing the existing unservicable /rusted drawer; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front complete all as specfied & directed and as shown on drawing. |
| 79 | Removing UNSV lock from drawers and shutter; S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 80 | Removing the old broken PVC shoes from the legs of table, S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom complete all as specfied and directed. |
| 81 | Continous gas welding to all broken joints of table in length of 1 cm complete all as specfied and directed. |
| 82 | Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specfied and directed. |
| 83 | TABLE STEEL 900X900X760MM, FD-1009:- |
| 84 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx900mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 85 | Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth complete all as specified and directed. |
| 86 | Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth complete all as specfied and directed. |
| 87 | Supply and fix new PVC shoe suitable to leg after removing UNSV shoe complete all as specfied & directed and as shown on drawing. |
| 88 | Completely removing all dents from table by smooth hammering, preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specfied and directed. |
| 89 | TEAPOY VERANDAH, FD-35/255:- |
| 90 | Removing UNSV top from teapoy verandah carefully;S&F new top of size 900mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 91 | Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg complete all as specfied & directed and as shown on drawing. |
| 92 | S&F long stiffener of length 750mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the short siffeners at bottom of teapoy, irrespective complete all as specfied & directed and as shown on drawing. |
| 93 | S&F short stiffener of length 350mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the legs of teapoy, irrespective complete all as specfied & directed and as shown on drawing. |
| 94 | Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 95 | TEAPOY VERANDAH, FD/E6/MAP/17:- |
| 96 | Removing UNSV top from teapoy carefully;S&F new top of size 750mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 97 | Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg complete all as specfied & directed and as shown on drawing. |
| 98 | Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of black paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 99 | TABLE 3'X2' WITH DRAWER STEEL, FD-1008 :- |
| 100 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 101 | Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position. The welded surface shall also be grinded to make the spots and surface smooth complete all as specified and directed. |
| 102 | Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front complete all as specfied & directed and as shown on drawing. |
| 103 | Removing UNSV lock from drawers and shutters ; S&F new 6 lever lock with duplicate keys complete all as specfied & directed and as shown on drawing. |
| 104 | Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom complete all as specfied and directed. |
| 105 | Continous gas welding to all broken joints of table in length of 1 cms complete all as specified and directed. |
| 106 | Completely removing all dents from table by smooth hammering, preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 107 | TABLE 3'X2' WITHOUT DRAWER STEEL, FD-1007:- |
| 108 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 109 | Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position. The welded surface shall also be grinded to make the spots and surface smooth complete all as specified and directed. |
| 110 | Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom complete all as specfied and directed. |
| 111 | Continous gas welding to all broken joints of table in length of 1 cms complete all as specified and directed. |
| 112 | Completely removing all dents from table by smooth hammering, preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only complete all as specified and directed. |
| 113 | TABLE DINING FOR OR'S STEEL, FD-165(M) :- |
| 114 | Removing UNSV top from table dining OR's steel carefully;S&F new top of size 1900x685mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 115 | Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg complete all as specfied & directed and as shown on drawing. |
| 116 | Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone/black paint shall be applied externally and internally to complete table as per approved colour/shade by GE after application of red oxide primer. The painting to each article shall only be carried out by spray machine only complete all as specfied and directed. |
| 117 | TABLE BED SIDE (MAP), FD/E6/MAP/15® :- |
| 118 | S/F new top with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges complete all as specfied & directed and as shown on drawing. |
| 119 | S/F new sides with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thickteak wood beading at all edges complete all as specfied & directed and as shown on drawing. |
| 120 | S/F new Upper drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges complete all as specified and as shown on drawing |
| 121 | S/F new Back ply 6mm BWR complete all as specified and directed. |
| 122 | S/F new lower drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges complete all as specfied & directed and as shown on drawing. |
| 123 | S/F new top upper back made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges complete all as specfied & directed and as shown on drawing. |
| 124 | S/F new handles 75mm long chrome plated of dia 8mm fixed with suitable screws complete all as specified and directed. |
| 125 | Painting to steel frame of table bed side steel with one coat of synthetic enamel black paint after cleaning, dusting and scratching the iron surface with sand emery paper complete all as specified and directed. |
| 126 | TABLE COMPUTER, FD/E6/MAP/03:- |
| 127 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 128 | Removing the existing unservicable key board of table computer by removing the unsv telescopic channel.supply and fix key board attached with new telescopic channel made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 129 | Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 130 | Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specfied & directed and as shown on drawing. |
| 131 | Removing UNSV/damaged drawer complete from Table computer and supply and fix new drawer made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob complete all as specfied & directed and as shown on drawing. |
| 132 | Painting to steel frame of table computer with one coat of synthetic enamel black paint of existing color after cleaning,dusting and scratching the iron surface with sand emery paper complete all as specified and directed. |
| 133 | CHAIR CB STEEL TUBULAR WITH ARM, FD-75(M):- |
| 134 | Scratching the entire frame of chair and applying one coat of synthetic enamel paint as per approved colour/shade by GE after preparation of surfaces by removing the old paint with sand emery paper complete all as specified and directed. |
| 135 | Remvoing the old unserviceable/broken MS flat, supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat complete all as specified and directed. |
| 136 | Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade and painting in black colour paint including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and directed. |
| 137 | Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade and painting in black colour paint including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and directed. |
| 138 | Removing the old unserviceable arm,supply and fixing new arm of 1st class teak wood in natural shade complete all as specfied & directed and as shown on drawing. |
| 139 | Removing the old unserviceable hard rubber toes,supply and fixing new Hard rubber shoes to the bottom frame of chair complete all as specfied & directed and as shown on drawing. |
| 140 | Removing the old unserviceable rubber caps and supply and fixing new rubber caps on the top of rear legs complete all as specfied & directed and as shown on drawing. |
| 141 | CHAIR VERANDAH:-, FD-256/259 |
| 142 | Spot gas welding to broken parts/joints of chairs complete all as specified and directed. |
| 143 | Removing of existing torn out/unserviceable plastic cane/niwar from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.The canning shall only be done after painting the chair complete all as specfied & directed and as shown on drawing. |
| 144 | Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair complete all as specfied and directed. |
| 145 | Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing one flat iron of size 20mmx5mm in support of PVC seat at centre between two sides through proper welding .The PVC seat shall got approved from GE before supply. The PVC seat shall be fitted only after painting the chair complete all as specified and directed. |
| 146 | Painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty whereever required complete all as specified and directed. |
| 147 | CHAIR SCHOOL WITH HAND BOARD, FD/E6/MAP/05:- |
| 148 | Removing UNSV / broken hand board of Chair school with hand board and supply and fix new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade with 4mm teak wood edging all around the hand board complete all as specfied & directed and as shown on drawing. |
| 149 | Removing UNSV one piece PVC seat and back and supply and fix new one piece seat and back to Chair school with hand board complete all as specfied & directed and as shown on drawing. |
| 150 | Removing the existing foot rest wire mesh of chair school and S&F the same with new one duly welded to match with existing complete all as specfied & directed and as shown on drawing. |
| 151 | Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg complete all as specfied & directed and as shown on drawing. |
| 152 | Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth complete all as specfied & directed and as shown on drawing. |
| 153 | Material and labour for painting to articles of steel furniture by adhering to following steps:-a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint or as per existing shade in each items shall be applied externally and internally to each articles b) The painting to each article shall only be carried out by spray machine only.c) The work will be executed at various units locations/residential accn or inside/outside restricted area as per user requirement. |
| 154 | Almirah large steel with shelves, FD-1031 |
| 155 | Almirah med/small with shelves steel, FD-1032 |
| 156 | Bed hard Steel MAP, FD/E6/MAP/08[R] |
| 157 | Chair CB steel with arms, FD-75 |
| 158 | Chair Verandah, FD-359/259/256 |
| 159 | Form without back steel, FD-77 |
| 160 | Locker bed side steel, FD-1029 |
| 161 | Rack 6 tier steel, FD-1038 |
| 162 | Rack shoe steel, FD/E6/MAP/02[R] |
| 163 | Table 3'x2' without drawer steel/Table Hav/Ors, FD-1007 |
| 164 | Table 3'x2' with drawer steel, FD-1008 |
| 165 | Table bed side, FD/E6/MAP/15[R] |
| 166 | Table office clerk steel, FD-1004 |
| 167 | Table office officer steel, FD-1003 |
| 168 | Teapoy verandah, FD-383 |
| 169 | Trestle SR steel, FD-1043 Please Enable Macros to View BoQ information |
