|
| 1 | Providing Pile Foundation of size 300mm dia using augur including Labour Charges andall other tools and plants charges etc., as per direction of Department Officers |
| 2 | Cement concrete 1:4:8(one cement, four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted |
| 3 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. |
| 4 | For Plinth Beam |
| 5 | For Column |
| 6 | For Beam and Slab |
| 7 | Cement Concrete 1:1.5:3 (one cement, one and half sand and three aggregate) using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in RCC works wherever necessary as per the direction of departmental officers complete |
| 8 | Supplying, fixing and placing in position mild steel /ribbed torsteel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specifications(upto 16mmdia rods) |
| 9 | Filling the area with well gravel including cost and conveyance of all materials from approved quarries including loading unloading and stacking the gravel etc., Complete as per specifications |
| 10 | Fly Ash Brick Work in CM 1:4 (One Cement & Four Sand) Using Size 9\\"x4 3/8\\"x2 3/4\\" Including Finishing, Curing, Etc., Complete complyingwith Standard specification. |
| 11 | Plastering with cement motar in cm 1:3 (one cement and Three sand) 12mm thick in all floors complying with standard specifications |
| 12 | Plastering with cement motar in cm 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications |
| 13 | Plastering with cement motar in cm 1:3 (one cement and three sand) 20mm thick in all floors complying with standard specifications |
| 14 | Supplying and fixing of MS grill using 'L' angle, MS Flat, SQ rod and MS sheetsetc.completecomplying with standard specifications as directed |
| 15 | Flooring with first quality vitrified tiles of size 60x60cm of approved brand and colour and laying with cement motar 1:3 20mm thick using first quality 60x60cm and point with colour cement neatly completecomplying with standard marbonite tiles of size specifications as directed |
| 16 | Daddoing the walls with first quality approved colour Glazed tiles of size 150X150X6 mm laid in cement mortar 12 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc.. |
| 17 | Flooring with Ceramics Tiles using with 6mm chips C.M. 1:2 mix using 20mm thick including cost of materials to work site and all other labour charges |
| 18 | Painting with plastic emulsion paint two coats over base coat for new plastered surface for using best quality and aproved colour of oil bound distemper conforming to ISI specification etc.. complete complying as directed by the departmental officers as per standard specification. |
| 19 | Painting with enamal paint two coats for new iron work including one coat of priining coat and using the best quality Iron primer and best quality synthetic enamel paint etc complete complying with standard specification |
| 20 | Supplying and Fixing of FRB Door of 28mm thick and the outer and inner supported over Fibre Glass Wool Sheet 3mm thick and the door supported with frames 3nos of Hinges to the Frame, 2no of 4\\"Towerbolt including screw and fixing charges complete. |
| 21 | Supplying and Fixing European Water Closet (white) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings |
| 22 | Supplying and Fixing of PVC Two Way tap |
| 23 | Supplying and Fixing of PVC, UPVC Pipes and Specials |
| 24 | 110mm PVC Pipe 6kgs/cm2 |
| 25 | 110mm PVC Elbow |
| 26 | 110mm PVC Door Tee |
| 27 | 110mm PVC Shoe |
| 28 | 110mm Multitrap |
| 29 | 32mm(1\\") UPVC Pipe |
| 30 | 32mm PVC Elbow |
| 31 | 32mm UPVC Tee |
| 32 | 32x25mm UPVC Brass Elbow |
| 33 | Supplying and Fixing of HDPE tank |
| 34 | Wiring with 2 * 15 Sq mm (220/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and cerling with PVC accessories in flush valve with 3mm thick hylum sheet cover with TW switch box and 5AFT switch with continous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable color PVC concealed light or fan point. (SD2) |
| 35 | Wiring with 2 * 1.5 Sq.mm (220/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush valve with 150 * 100 * 113 mm with TW switch box with 3mm ticj hylum sheet cover for 5A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable color for concealed PV plug point etc., complete. |
| 36 | Supply and run off 2 of 2.50sqm PVC insulated single core unsheathed core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqm PVC insulated single copper conductor cable confirming to IS 694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (derived from SD 55) |
| 37 | Supply & fixing of single box tpe 4'20W LED fitting complete with copper choke and condenser TW round blocks on wall ceiling with flu tube PVC unsheated copper test from terminals to be fitted etc., complete. |
| 38 | Supply & fixing of 1200mm (48inch) AC ceiling fan complete with stepped electronic 300W regulator with 1:1 meter down rod on the existing clamp etc., complete. (SD 106) Please Enable Macros to View BoQ information |
