|
| 1 | Mechanical Engineering Lab Materials |
| 2 | Serve motor drive kitInterface L293D Motor Driver IC with Arduino to control direction of rotation of two DC Motors) |
| 3 | BLDC motor kitBLDC Motor 1 NoBldc motor drive -1noInbuilt volt and ammeter and rpm meterInbuilt power supplyInput 230v ac |
| 4 | LVDT Trainer Kit• Complete educational trainer for Linear Variable Differential Transformer (LVDT) displacement measurement.• Built-in AC excitation source and signal conditioning circuitry for LVDT operation.• Micrometer assembly for precise linear movement of the LVDT core.• Displacement range ~10 mm with clear front-panel adjustments for zero & calibration. • Digital display (typically 3½-digit) for direct readout of conditioned output/displacement values. • Test points and banana sockets for signal observation on external instruments. • Self-contained unit in a durable enclosure with labeled controls and educational layout. • Includes user manual and patch cords for experiments. • Operates on 230 V AC, 50 Hz mains supply. |
| 5 | Multi-cylinder PetrolPhase : Single Phase Load: Mechanical load with ropeNumber Of Cylinders : 4Displacement : Rope brakePower : 65HP,4000 RPM,1396 CCBrand Material : Mild SteelEngine Type : 4 STROKE SELF STARTFrequency : 15HZFuel Consumption : PetrolFuel Tank Capacity : 5 LETERMorh’s Test Rig |
| 6 | Tail stock assemblyHeavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50–75 mm stroke, hand wheel feed, dead centre MT2/MT3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300–400 mm centre height training lathe. |
| 7 | DC motorVoltage 220-440 V DCPower - 180 W Speed - 200 rpm |
| 8 | Hydraulic CylinderDouble acting hydraulic cylinder, bore 40–50 mm, stroke 200–300 mm, working pressure up to 100–160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. Supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly. |
| 9 | Hydraulic opreated Directional control valve (DCV)Manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size NG06 (CETOP 3) or equivalent, rated pressure 210 bar, flow 20–40 lpm; valve body with hardened and ground spool, centering springs, ports P–A–B–T clearly marked. Supplied on small mounting plate for dismantling, inspection and assembly practice. |
| 10 | Bearing with shaft assemblyTeaching unit with shaft 25–35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). Designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig. |
| 11 | Coupling unit using driving and driven shaft plumber block bearing unit1. The Plummer Block HousingMaterial: Cast Iron (Grade FG 200 or equivalent). Type: SNG or SNL Series (Split-type housing).Sealing: Felt seals or V-ring seals (to demonstrate lubrication retention).Lubrication: Provided with a grease nipple at the top center for manual lubrication practice.2. The BearingType: Self-aligning Ball Bearing (1200 series) or Spherical Roller Bearing (22200 series).Bore Diameter: Standard 25mm or 30 mm (Ideal for lab scale).Mounting: Adapter sleeve mounting (H-series) to teach students how to lock a bearing onto a smooth shaft.3. Shafting and CouplingShaft Material: Ground Carbon Steel (EN8 or EN9) for high surface finish.Coupling Type: * Flexible Coupling: To demonstrate the bearing's ability to handle slight misalignment.Rigid Flange Coupling: To demonstrate traditional direct connection.Driving/Driven Setup: One shaft connected to a small Electric Motor (Driving) and the other to a Brake Drum or Load (Driven). |
| 12 | Spring Test Machine Load & Displacement Sensing• Load Cel * Capacity: 0–10 kNo Accuracy: ±1% FS (better if ±0.5% FS)• Displacement Sensor * LVDT / Digital encodero Accuracy: ±0.5 mmMachine Design• Frame: Rigid steel frame with crosshead • Movement Type:o Mechanical Screw with Hand Wheel (simple & robust) oro Electromechanical Actuator (for smoother, controlled motion)• Crosshead Travel: ~150–200 mm• Safety Guards: Transparent shields around moving partsFixtures & AccessoriesSpring Testing• Compression Plates (ground & parallel) • Tension Hooks / Eyeletso For extension springs • Set of spacers / adapters for small springsTensile Testing• Standard Tensile Grips * Wedge or screw type• Calibration certificate for load cellStandards ComplianceEnsure compliance with basic material test standards such as:• ASTM E4 / ISO 7500-1 — Calibration of force measurement• ASTM E8 / ISO 6892 — Tensile Performance & Accuracy• Load accuracy: ±1% FS• Displacement accuracy: ±0.5%• Repeatability: ±0.5% Please Enable Macros to View BoQ information |
