|
| 1 | Providing and fixing 12 mm thick Laminate Flooring of approved make - class of use 23/33, wear Resistance AC-5, Impact Residence-IC 3, (as per EN13329), Top surface having a MLC (Multi Layer Composite) High Pressure Laminate, top surface treated with (Aluminium Oxide) surface guard & on the top of high density fiber board substrate specially development core having smart lock Tounge and Groove joints to secure long lasting joint. The edge of Tounge and groove planks duly impregnated with paraffin. The approved decor planks to be placed on Underlay- 0.2mm thick Alkali resistant Polyethelene sheet 2mm EPU foam to resist any moisture movement from the sub floor and secure floating floor installation as per the direction, satisfaction and shades approved by the Engineer-in-charge (Note:- The item includes removal of existing wooden flooring if required, rectification of minor undulation. nothing shall be paid extra on this account). |
| 2 | Providing and Fixing 8 mm thick Laminate Flooring of approved make -Class of use 23/32, wear Resistance AC-4, Impact Residence-IC 2, (as per EN13329), Top surface having MLC (Multi Layer Composite) High pressure Laminate, top surface treated with (Aluminum Oxide) surface guard & on the top of high Density fiber board substrate specially development core having smart lock Tounge and groove joints to secure long lasting joints. The edge of tounge and groove of planks duly impregnated with paraffin. The approved decor planks to be placed on underlay-0.2mm thick Alkali resistant Polyethelene sheet and 2mm EPU foam to resist any moisture movement from the sub floor and secure floating installation as per the direction satisfaction and shades approved by the Engineer-in-charge. (Note:- The item includes removal of existing wooden flooring if required, rectification of minor undulation. nothing shall be paid extra on this account). |
| 3 | Providing & Fixing of 14 mm thick engineered hard wood flooring of approved make having plank size of approx. 1900 mm x 190mm with the top veneer of 2mm hardwood fixed on multilayer ply with smart click lock /Tounge and Groove joints to secure long lasting joint and micro-beveled edges. The approved decor planks to be placed on underlay-0.2mm thick Alkali resistant Polyethelene sheet and 2 mm thick high performance sound block underlay on the floor having aluminium foil for moisture barrier and secure floating installation as per the direction satisfaction and shades approved by the Engineer-in-charge. (Note:- The item includes removal of existing wooden flooring if required, rectification of minor undulation. nothing shall be paid extra on this account). |
| 4 | Providing and placing wooden laminated MDF beading of size 25x25mm of approved make to match with flooring as per manufacture specification and direction of Engineer-in-charge. |
| 5 | Providing and fixing wooden laminated MDF door profile to match with flooring as per manufactures specification and direction of Engineer-in-charge. |
| 6 | Providing & Fixing Designer 100 mm width Readymade laminated Skirting of approved make made of MDF in 10 mm thickness matching to the shade of flooring as per manufactures specification all complete including installation, cartage, wastage etc as per direction and satisfaction of Engineer-in-charge. |
| 7 | Providing & Fixing Designer 150 mm width Readymade laminated Skirting of approved make made of MDF in 10 mm thickness matching to the shade of flooring as per manufactures specification all complete including installation, cartage, wastage etc as per direction and satisfaction of Engineer-in-charge. |
| 8 | Providing & Fixing of 20 mm thick THERMORY PINE C92 wood Panels of approx. size 140 mm (Breadth) X 2400 mm to 5100 mm (length) of make BRENSTOL OU/Kebony/Perennial wood installed on a frame made of Hollow Aluminum Channels (Size 25mm X 50 mm) at a distance of 450-600 mm. The aluminum frame will be leveled and undulation of wall will be adjusted by filling with wood in the aluminum channels. THERMORY PINE C92 wood Panels are then to be fixed over the aluminum channel with the help of SS B1 THERMORY FASTNERS & SS Screws. The screws should not be visible after finishing. The fixed Wooden panel surface will be finished with Exterior oil based coatings in the desired stain. This item includes all cost i.e. installation, transportation, wastage, labour and T&P required for the job etc. |
| 9 | Providing & fixing wall cladding with PVC charcoal decorative panels of approved colour & pattern complete as per direction and satisfaction of engineer in charge. |
| 10 | (i) min. 2mm thick with 3.5-5.0mm overall thickness |
| 11 | (ii) min. 4 mm thick with 6.5-10mm overall thickness |
| 12 | Providing & Fixing laminated L-profile along the edges of the PVC charcoal wall panelling to give a finished aesthetic, matching with the shade of wall panelling as per manufactures specificationall complete including installation, cartage, wastage etc as per direction and satisfaction of Engineer-in-charge. |
| 13 | Providing & fixing extruded WPC panel of size 60mm x 40mm of make of Al Fresco Co. or equivalent including all accessories complete as per direction of Engineer-in-Charge. |
| 14 | Deduct for taking away of any type of wooden laminate flooring/skirting etc and the like received from dismantling. The material so received shall be the property of the contractor after dismantling duly weighed/measured before removing from the site in the presence of Engineer-in-charge or his Authorized representative all complete. |
| 15 | Deduct for taking away of any type of Engineered wood Flooring etc and the like received from dismantling. The material so received shall be the property of the contractor after dismantling duly weighed/measured before removing from the site in the presence of Engineer-in-charge or his Authorized representative all complete. |
| 16 | Finishing of Pine wood flooring with exterior grade wood oil based coating in desired stain including scrubbing, sanding, grinding, filling cracks/ undulations with wood filler material, etc all complete as per direction and satisfaction of E-I-C. |
| 17 | Repair and repolishing of bamboo cladding with water based resin coating including scrubbing, sanding, grinding, filling cracks/undulations with filler material, staining in desired shade etc all complete as per direction and satisfaction of E-I-C. Please Enable Macros to View BoQ information |
