|
| 1 | Raisin Processing Machinery : DE Steaming / Cleaning Line 2 TPH |
| 2 | Vibrator Feeder with hopper :Approximate size of hopper is 1000 x 1000 x 800mm made out of 2mm thick sheet MOC: Vibro motor mounting bracket in Carbon steel , Motors & Oscillating mounts in CI standard material & Other all in SS304, Vibrator size 2000 x 800 x 1220mm height from ground, One Slotted sieve provide to remove Small stems, Italvibras / Oli make vibrating motors 5KN each 02 No’s, Oscillating mounts for isolation of vibrating body from ground make Rosta/DPH, Installed power approx. 1Hp |
| 3 | Elevator Feed to Desteming machine :Overall dimensions: 3200mm length approx., 600 mm width and 3000mm height from groundMOC: Geared motor in CI & Other all in SS304, Belt food grade side walled PU belt, supported on bed made in 2.5mm thick sheet, Structure made in 80x40 and 40x40 sq. tubes, Feed hopper and discharge chute, Installed power 1HP., Geared motor SEW/Nord/DPH make 1HP, 45 RPM |
| 4 | Vibrator with Single Aspiration unit-1 :MOC: Vibro motor mounting bracket & Blower in Carbon steel , Motors & Oscillatingmounts in CI standard material & Other all in SS304 Size: 2500mm in length, 1200mm overall width and 900mm height from ground approx.Grader Sieves removable type locked with the help of toggle clamps It consists of Top Side Dia 20mm hole size sieves mounted. Two Capsule Hole 3.75 X 50 MM L Sieves also provided, Vibrating motors are italvibras / Oli vibra make 8KN each Oscillating mounts 04 no.s makes Rosta/Equivalent. All mounted on heavy duty structure. 1 no.s of blowers of 3HP and 01no.s of Air knife blowers of 1.5HP for aspiration Air lock rotory feeders to remove waste Installed power 7HP |
| 5 | Vibrator with Single Aspiration unit-2 :MOC: Vibro motor mounting bracket & Blower in Carbon steel , Motors & Oscillatingmounts in CI standard material & Other all in SS304 Size: 2500mm in length, 1200mm overall width and 900mm height from ground approx.Grader Sieves removable type locked with the help of toggle clamps Two Round Hole Dia 6mm Sieves also provided Vibrating motors are italvibras / Oli vibra make 8KN each Oscillating mounts 04 no.s makes Rosta. All mounted on heavy duty structure. 1 no.s of blowers of 3HP and 01no.s of Air knife blowers of 1.5HP for aspiration Air lock rotory feeders to remove waste Installed power 7HP |
| 6 | Washing Line 2 TPH |
| 7 | Vibrator Feeder with hopper :Approximate size of hopper is 1000 x 1000 x 800mm made out of 2mm thick sheet MOC: Vibro motor mounting bracket in Carbon steel , Motors & Oscillating mounts in CI standard material & Other all in SS304 Vibrator size 2000 x 800 x 1220mm height from groundOne Slotted sieve provide to remove Small stemsItalvibras / Oli make vibrating motors 5KN each 02 No’sOscillating mounts for isolation of vibrating body from ground make Rosta / DPH Installed Equivalent |
| 8 | Elevator Feed to Desteming machineOverall dimensions: 3200mm length approx., 600 mm width and 3000mm height from ground, MOC: Geared motor in CI & Other all in SS304, Belt food grade side walled PU belt, Clits height 70mm to 75mm at the pitch of 300mm, Belt supported on bed made in 2.5mm thick sheet, Structure made in 80x40 and 40x40 sq. tubes Feed hopper and discharge chute, Installed, Geared motor SEW/Nord/DPH make 1HP, 45 RPM |
| 9 | Cascading :With Recirculation, Pump, Settling tank, filters, & set of Piping, It consists of: Raisins Destonner (Cascade) MOC: Geared 50, CUM/Hr capacity mono block type. Motor & amp; Pump in CI & Other all in SS304, Size: 3000mm length , 900mm width and 2950mm heigh, Inclination angle 25 to 30Deg. From the ground Mounted on SS304 rectangular structure, Stone trap with SS angle, Provision for removing of stone in bottom collection hopper by pneumatic cylinder |
| 10 | Water Filtration and Recirculation Unit & Mini vibratorMOC: Vibro motor mounting bracket in Carbon steel , Motors & Oscillating mounts in CI standard material & Other all in SS304 Water tank capacity 1200 Ltrs Parabolic shaped wedge wire screen of width 800mm mounted on tank Water from destonner will be filtered and collect in this tank. Recirculation pump with dual cartridge filter in suction of around 50 CUM/Hr capacity mono block type.Vibrator size 2500 L x 1000 W x 1220mm height from ground Italvibras / Oli make vibrating motors 6KN each 02 No.s Oscillating mounts for isolation of vibrating body from ground make Rosta Installed power approx. 10HP Ma.Spinner |
| 11 | Control PanelMS powder coated cabinet, VFD for pump, starters for all other motors. Panel is Mounted on skid and machine is delivered with wiring at factory. |
| 12 | Dryer 2 TPH |
| 13 | Transfer Belt Conveyor Below Machine :Size: 3000mm in length, 400mm width and 900mm height from ground approx.MOC: Geared motor in CI & All other in SS304Thermoplastic positive drive food grade Plane belt.Belt supported on ss304 bed and return side rollersSEW/Nord make geared motor 0.5HP, 27RPM |
| 14 | Stemming, vibrator Grader with Double Aspiration :Completely made in ss304.It consists of following parts Cap stemmer and cleaning and grading machineC.stemmer: Size: 1200 x1200 x 2800 MM Height, MOC: Motor standard CI & lid screw in carbon steel & All other in SS304, Conical rotor provided with rubber paddles 20 sets, Outer casing in two halves provided with PP blocks for desteeming Gap between rotor and casing can be adjusted by lid screw Structure made in 80x80 mm sq. tubes Motor power rating 3.7 KW |
| 15 | Drying Chamber : Made up with Number of Panels Insulating Material of Panel: Polyurethane (PUF) PUF Panel Thickness: 80 mm Inner Material of Chamber: SS 304 Outer Material of Chamber: GIPP Total Number of Door: 2 N Power Supply V/PH/HZ 3 ph , 415 V Connected Power kW 26 kW Average running power kW 17 kW Refrigerant (R134a) R-134a Heating capacity kW 58 kW Cooling capacity kW 47 kW Dehumidify capacity L/H 74 L/H No of heat pump No. 2 No. Hot air flow (m³/H) 72000 to 48000 m³/H heat pump Dryer size (L x W x H) (mm) 2440 x 1590 x 1660 mm Heat pump All inner contact part SS-202 and outer cover GIPP Trolley Size (L x W x H) (mm) 670 x 870 x 1790 mm Trolley material SS-202 Tray Size (L x W x H) (mm) 810 x 660 x 30 mm tray material SS-304 (wire mesh) Drying chamber size(mm) (L x W x H) (mm) 7610 x 3450 x 2150 mm Overall machine size(mm) (L x W x H) (mm) 10000 x 3450 x 2150 mm Drying chamber PUF thickness and material mm80 mm thk, inner SS-304 & outer GIPP sheetNo of trolleys Nos. 20 No trays in each trolley Nos. 16 Total no. of trays in machine of Dryer Nos. 320 Total tray area (m2 ) 160 m2 Chamber temperature ⁰C 10⁰ to 80 ⁰C Dehumidification capacity based on Dehumidification capacity based on 100 % RH air inlet, in lower RH it may be lower) Heating and cooling capacity based on Heating and Cooling capacity based on 25 deg C evaporation and 60 deg C condensing temperature will given you 1 no's of extra plan tray of each trolley for finalised modle. OVER ALL SIZE:-11831mm L x 3229mm W x 2220mm H |
| 16 | Inspection Conveyor Below Machine :Size: 4000mm in length, 750mm width and 900mm height from ground approx.MOC: Geared motor in CI & All other in SS304, Thermoplastic positive drive food grade Plane belt.Belt supported on ss304 bed and return side rollers Sitting arrangement also provided Top cover with tube light also provided SEW/Nord/DPH make geared motor 0.5HP, 28RPMWheels also provided for easy movement of conveyor |
| 17 | Colour Sportex Machine 2 TPH • Simple operation• Multi-commodity• Zero-spillageMain Features:1)Custom ultra-high resolution full-color cameras2)High-intensity flexible broadband LED lighting system for color discrimination of various materials3)The AI engine clearly identifies the hue, saturation and value of colors4) Size sorting technology to distinguish materials by size features5) Infrared identification technology - equipped with an infrared identification system, accuratelyidentifies the malignant impurities such as glass, plastic and shoulder stones in raw materials6) Fully integrated feeding system - new carbon fiber lightweight high-speed vibrator providing 7)Flexible sorting configuration including secondary, tertiary or even quaternary sorting8)Zero Spillage Concept9)The newly developed sixth generation ejector to accurately eject, improve the final reject ratio10)\\"Cross targeting\\" technology - a new sorting algorithm that targets the material center, ensuring the accurate removal of foreign matter even under large capacity11) Industrial 15” high-resolution touch screen with embedded Windows system12)proprietary operating system and GUI13)Special software for sensitivity control suitable for various defects14) Multilingual user interface15)Product modes to handle multiple applications16) Sealed optical boxes (rated IP5X) to prevent dust ingress and associated performance decline17)Ambient temperature - standard model range of 32°F to 113°F (0°C and 45°C)18) Mild steel powder-coated frame19) Stainless steel hoppers and receptacles20) Consumable Spares – One Year Kit |
| 18 | Bypass Belt Conveyor : Size:2500mm in length, 500mm width and 900mm height from ground approx. MOC: Geared motor in CI & All other in SS304, Thermoplastic positive drive food grade Plane belt.Belt supported on ss304 bed and return side rollers, SEW/Nord/DPH make geared motor 0.5HP, 28RPM |
| 19 | Sortex Feed Elevator :Overall dimensions: 4500mm length approx., 750mm width and 6000mm height from ground, MOC: Geared motor in CI & All other in SS304, Thermoplastic positive drive food grade belt with side wall. Belt supported on bed made in 3mm thick sheet, Structure made in 80x40 and 40x40 sq. tubes, Feed hopper and discharge chute, Installed power 1 HP, Geared motor SEW/Nord/DPH make 55 RPM |
| 20 | Sortex Recycle Elevator : Overall dimensions: 4500mm length approx., 600mm width and 6000mm height from ground MOC: Geared motor in CI & All other in SS304, Thermoplastic positive drive food grade belt with side wall. Clits height 70mm to 75mm at the pitch of 300mm, Belt supported on bed made in 3mm thick sheet, Structure made in 80x40 and 40x40 sq. tubes, Feed hopper and discharge chute, Installed power 1 HP, Geared motor SEW/Nord/DPH make 55 RPM |
| 21 | Grader : 2 TPHMOC: Vibro motor mounting bracket & Blower in Carbon steel & Other all in SS304 Size: 2500mm in length, 1200mm overall width and 800mm height from ground approx.Sieves removable type locked with the help of toggle clampsVibro motor LI/Italavibrus Make Oscillating mount DPH/Rosta Make It consists of two sieves of dia 6mm, dia 8mm mounted. It helps to size grading. All mounted on heavy duty structure. |
| 22 | Control Panel :MS powder coated cabinet, VFD for and starters for all other motors. Panel is mounted on skid and machine is delivered with wiring at factory. |
| 23 | ETP - 100 KLD :(As per specification mentioned in tender document ) |
| 24 | Installation and Commissioning Charges Please Enable Macros to View BoQ information |
