|
| 1 | Clearing and Levelling of site by employing labour, tool and tackle and levelling of ground by employing men and machinery for start of work. The job includes labour cost, hire charges of tools and tackles, machinery and taxes as applicable. (Approx. 5000 Sft) |
| 2 | Earthwork in excavation by manual means over area for levelling purpose including disposal of excavated earth up to 1m from cutting edge and should be disposed in near-by all kind of soil.300’x1’-6”x2’-6” + 14(3’x3’x3’) + = 1503 Cft = 42.56 Cum Area to be excavated keeping in view the earthquake resistance for which an MS mesh (10 mm) is to be provided in the base foundation of the plinth |
| 3 | Providing and laying of cement concrete (1:5:10) using 40mm nominal size Nallah stone .including curing but excluding the cost of centring and shuttering. All work upto plinth level Quantity = 258’x1’x3” + 14(3’x3’x3”) + 40’x40’x3” + 15’x10’x3” = 533.5 Cft = 15.10 Cum |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars of size 8mm, 10mm, 12mm, 16mm for plinth tie Beams, Floor Rafts, Foundations Columns (14 Nos)8mm bar = 1500’ = [email protected] kg/m = 180.55 Kg 10mm bar = 9500’ = 2895.60m@ 0.617 kg/m = 1786.58 Kg 16mm bar = 500’ = 152.40m@ 1.58 kg/m = 240.79 Kg Total Quantity = 2207.92 Kg |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns Quantity = 14(12’x4’) + 258’x2’ = 1188 Sft = 110.36 Sqm |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m.Quantity =14(3’x3’x3”) + (258’x1’x3”) + (40’x40’x1’) + (15’x10’x1’) = 1846Cft = 52.27 Cum |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size Plinth = 258’x1’x2’ = 516 Cft Foundations =14(3’x3’x4’) = 504 CftTotal = 1020 Cft = 28.88 Cum |
| 8 | 12 mm cement plaster to plinth wall of mix 1:6 (1 cement: 6 fine sand)Total = (300’x1’) = 300 Sft = 27.87 Sqm |
| 9 | Cement concrete flooring and foundation as per the site requirement 1:2:4 (1 cement: 2 sand: 4 graded stone finished with a floating coat of neat cement including cement slurry but excluding the cost of noising of steps Complete 50mm thick 20 mm size stone aggregate. Total = (40’x40’) + (15’x10’) = 1750 Sft = 162.58 Sqm |
| 10 | Steel work welded in built up section/framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings etc. trusses including primer and enamel paint including nut bolts, kingpost, struts etc.Column Square Hollow Pipe Section(100x100x5mm): 14x12’=168ft= [email protected]/m= 600.57 KgMS Square Plate of size (300 x 300 x 8mm) @ 47.1 kg per Sqm Columns = 14 Nos with plates at both ends Total = 28 x 47.1 x 0.0929 = 122.51 Kg Purlins/ Truss/ Rafter Rectangular Sections (80x40x3.2mm):Truss = 926’ = [email protected]/m = 1552.32 KgPurlins =460’ = [email protected]/m= 771.1 Kg40 MS Anchor Bolts of size 20mm x 750mm(84 Nos) 84x2'-6\\" = 210' = [email protected] per metre =169.01 Kg Total = 3093 Kg |
| 11 | Supply and installation at site of Prefabricated Poly-Urethane Foam Panels of size 60 mm thick Fire proof Panels for walls (PPGI finish on both sides) and 60/90 mm thick Colour Coated Corrugated PPGI sheet for Roof to make a closed structure on the outer frame including doors and windows (made out of Powdered coated aluminium of gauge not more than 12 mm) as per drawings approved by Engineer in charge. Prefabricated Sandwich PUF panels with Cam toggle type fasteners fitted and self-locking PVC gaskets fitted on all sides of wall and ceiling/roof including rivets, Silicones, Anchor fastener, self-drilling screw and all other allied accessories required for the installation/erection of PUF panels. Wall to wall cam locking system. Internal/External flashing to be provided. Job includes Cladding on all walls including sunshade on all windows and outer doors.Total = 300’x11’ = 3300 Sft = 306.58 Sqm |
| 12 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) wth 3 Track window (1mx1.2m)–08Nos., Door of size (1mx2.1m)–04Nos, Door of size (0.76mx2.1m)–03No., and Ventilaters of size (0.3mx0.3m)–02 Nos. Qty:- 325.75 Kg |
| 13 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) as per Qty:- 16.78 Sqm |
| 14 | Providing and fixing 12mm thick pre laminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides Qty:- 502 Sft = 46.63 Sqm |
| 15 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides as per Qty:- 16.78 Sqm |
| 16 | Providing and fixing glass panes to windows, clerestory windows, ventilators including all allied accessories required for fitting of the glass panes etc |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete of size 500x500mm. Floor area = 40’x40’ + 15’x10’ = 1750 Sft = 162.58 Sqm |
| 18 | False CeilingProviding and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminium (with 15 micron anodic coating) T- sections 35 x 15 x1.5 mm size main runners, cross runners 23.5 x 19 x 1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia. M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of primer and paint as per Direction of Engineer Incharge.Roof area = 40’x40’ + 15’x10’ = 1750 Sft = 162.58 Sqm |
| 19 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour& pattern. over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer- in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.Area = 160’x5’ + 20’x30’ = 1400 Sft = 130.06 Sqm |
| 20 | Providing and fitting of sanitary items in Three nos. bathrooms and make them fully functional:-3 nos. English Seat with all accessories, 3 nos. urinal pot with all accessories, 4 nos. wash basin of size not less than 18\\" with all accessories 1 no. steel sink, 2 nos. looking mirrors of appropriate size, Towel rods 4 nos., 4 nos Soap holder, P/F of Bibcocks and all other accessories. Providing and laying of 150 mm PVC pipe of reputed make and 75 mm PVC pipe for urinal and wash basin. Providing and laying of PVC pipe of size 50 mm for water supply system to all the bathrooms from source to the bathroom along with all allied fitting and accessories. It also includes construction of main holes, PVC cover at the top of the main/check hole, fitting of gas pipe along with connections with the bathroom to make bathroom fully functional with all other allied accessories. The job also includes P/F of 2Nos 1000 Ltr. P.V.C water storage tank along with all allied accessories and connections. The job also includes the laying of GI/CPVC pipes ½ inch for water connection. P/F of 1 HP self-priming pump for water supply. Fitting of 4 Nos Taps for water supply and erection of Structural Steel stand for PVC water tanks -02Nos. P/F of sanitary fitting in kitchen P/F of CPVC pipe 1'',CPVC pipe 1.25'',female elbow 1''x 0.5 '',female tee 1''x 0.5 '',FTC 1''x 0.5'’, elbow 1 '' plain tee 1'', reducer 1''x1.25 '', socket 1.25'', socket 1'', Hooks plug 0.5'',solvent, tank nipple1.5'', 1.25''ballvalve, union TEE, 4''bend, 4'' x2.5''floortap, 2.5”TEE &bend, pipe4'',pipe2.5'',white water closet European W.C.pan with seat & lid, 10 ltr low level white PVC flushing cistern with flush pipe with with all fittings & fixtures-1No, C.P brass long bibcock, angle valves CP Cup,Hand jet, teflon tape PVC Connection/waste pipe, CP Jali plain/hole, P/F of water gyser (ISI marked) with accessories-2No, SS kitchen sink18”, CC kitchen shelve 50mm thick fixed with granite stone. P/f of CC circular septic tank with minimum dia 3' & depth 8’ with lid cover – 2 Nos |
| 21 | Providing, fitting, Installation, testing and commissioning of 1.5 Ton split minimum 3 star type ACS (copper wound). Each unit must provide cooling and dehumidification and to be operated via remote control at 220/240 Ac supply with latest in-vogue features PVC pipe for drain shall be supplied and fitted complete with accessories such as bent, elbows, flexible connections, MS stand for outdoor unit of Split AC and Extra length of copper pipe for outdoor units as required. Job also includes P/F of 5 KVA automatic voltage stabilizer copper wound wall mounted of range 90 - 240 V including providing and fitting of 32A MCB along with 6 sq. mm copper wire for AC. Warranty shall be provided for 12 months from date of installation. The compressors shall be warranted for 5 years from date of installation. |
| 22 | Electrical fitting by way of Providing and fitting of 100 watt LED Panel of size 300x300mm – 8 no. ceiling fans 48”– 20 No. exhaust fan 12\\" dia - 5 no., 4’ Led Concede Tube light – 16 Nos,, 8-12W LED Lights – 10 Nos, Job also includes Providing of laying of main service line 16 sq. mm from main pole to MCB box – 100mtr and for heavy load also 63A change over. It also includes providing of 1.5mm wire for light points, 2.5 sq.mm pvc wire for UPS pints, 4mm PVC wire for AC points,(3x4sqmm) 25A SP MCB for 1.5 T Split ACs, 3x2.5 Sqmm PVC insulalted wires in 1.6mm thick 25mm dia MS conduit pipes for computer terminals, 6A switches-100 Nos, 6A sockets – 25 nos, 15A sockets – 25 nos conduit,, MCB, MCCB, Main Circuit Box, Distribution box, ceiling fans 48”- 5 Nos, ceiling fans 12” – 4 Nos, 12’ exhaust fans – 04nos and other allied electrical items for complex The job includes material cost labour cost and taxes. |
| 23 | Providing and fixing 0.50 mm pre-profiled colour coated corrugated sheets to laid over frame work of trusses columns, purlins and side rails using hot dipped zinc coated self-drilling hexagonal washers, fastener etc. Roof:Total area = 45’x45’ + 17.5’x12.5’ = 2331.25 Sft = 216.58 Sqm |
| 24 | Providing of basic amenities such as Office Table of Standard size along with Executive Chair-01 Nos, Office Chairs- 10 Nos, Steel almirah 6’x2’-6”- 02 Nos., Sofa three Seater – 04 Nos., Double bed Set of standard size- 02Nos with mattress of standard size-02 Nos, Curton rods with curtons, centre table – 02 Nos., etc |
| 25 | Painting of the complete complex by way of applying two coats of anti-corrosive superior quality metal primer and two coats of superior quality exterior paint on structural steel work. Job is inclusive of the cost of material, labour charges, transportation and all taxes etc. |
| 26 | Demolishing R.C.C., Brick work manually/by mechanical means including stacking of steel bars, wooden material and disposal of unserviceable material within 50 meters lead as per direction of Engineer incharge. |
| 27 | Repair/restoration of compound wall by way of patch work and brick work, plaster etc and repair of Structural steel gate- of size 6’x4’ – 01 No. and 6’x6’ – 1 No. and MS Railing by MS round pipes, MS square pipes, MS flats etc by welding, riveting etc. Job is inclusive of cement and steel painting and priming. Job includes the cost of material, labour cost and all taxes. |
| 28 | Composite work of flowers/tree plantation at inspection hut including Supplying and stacking of good earth at site, Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. Complete planting of seedlings /saplings & watering to the newly planted plants. Gap filling and application of insecticides, pesticide etc including water connection at site of flower beds inclusive of the cost of allied pipe fittings. Please Enable Macros to View BoQ information |
