|
| 1 | Isolation dampers (butterfly type Single Louvered Damper) - Design, Procurement of material, Preparation of fabrication drawings and site erection drawings, Fabrication, Inspection, Shop testing, Packing, Safe Delivery, Site Installation and Erection along with its supports and Site Testing of Isolation dampers (butterfly type Single Louvered Damper) for exhaust system filter bank inlet / outlet with flexible metallic sealing to ensure leak tightness of minimum 99.8%, Double acting Rotary type pneumatic actuator for the following sizes as per the technical specification and drawing. |
| 2 | 900 x 800 x 250 mm ( Filter Bank Inlet) |
| 3 | 1800 x 800 x 250 mm (Filter Bank Outlet)) |
| 4 | 1200 x 1000 x 250 mm (AHU Inlet & outlet) |
| 5 | 1000 x 800 x 250 mm (AHU Outlet) |
| 6 | 1300 x 1100 x 250 mm (AHU Inlet/Outlet) |
| 7 | SS filter retainer frame (5x3 module):- Procurement of material, Preparation of fabrication drawings and site erection drawings, pickling and passivation, Fabrication, Inspection, shop testing, packing, safe Delivery, Site Installation and Erection along with its supports & structure and site testing of SS filter retainer frame (5x3 module) as per approved drawing and technical specification. All the consumables will be in the scope of vendors. |
| 8 | Mild Steel Leak tight doors - Design, Procurement of materials, Preparation of fabrication drawings and site erection drawings, Fabrication, Inspection, shop testing, packing, safe Delivery, Site Installation and erection, site Testing of Mild Steel Leak tight doors for filter banks / plenum of exhaust system, MS epoxy painted and as per the approved drawings and technical specification. |
| 9 | a)Size: 900 x 2000mm |
| 10 | b) Size : 900 x 2200 mm |
| 11 | C) Size: 900 x 1250mm |
| 12 | Air handling Unit - Design, Procurement of materials, Preparation of fabrication drawings, site erection drawings, Fabrication, Inspection, shop testing, packing, safe Delivery, site Installation, erection along with its supports, site Testing of Once through Air Handling Units. The work involves double-skin construction air handling units with copper cooling coils, motorized 2-way mixing valves, temperature sensors and transmitters, valves, strainers, louvers, filter frames, air-actuated discharge dampers with motors, LPBS, power and control cables, and all necessary instrumentation and accessories as per the approved drawings and technical specifications. Supply of Pre & HEPA filter is not in scope of this tender. Capacity: 150 TR, Dehumidified air quantity: 30000 CMHFan static: 100mm WC @STP |
| 13 | Air handling Unit - Design, Procurement of materials, Preparation of fabrication drawings, site erection drawings, Fabrication, Inspection, shop testing, packing, safe Delivery, site Installation, erection along with its supports, site Testing of Once through Air Handling Units. The work involves double-skin construction air handling units with copper cooling coils, motorized 2-way mixing valves, temperature sensors and transmitters, valves, strainers, louvers, filter frames, air-actuated discharge dampers with motors, LPBS, power and control cables, and all necessary instrumentation and accessories as per the approved drawings and technical specifications. Supply of Pre & HEPA filter is not in scope of this tender. HEPA filter will be provided as FIM for filter frame testing purpose.Capacity: 50 TR , Dehumidified air quantity: 16000 CMHFan static: 150mm WC @STP |
| 14 | Air handling Unit - Design, Procurement of materials, Preparation of fabrication drawings, site erection drawings, Fabrication, Inspection, shop testing, packing, safe Delivery, site Installation, erection along with its supports, site Testing of Once through Air Handling Units. The work involves double-skin construction air handling units with copper cooling coils, motorized 2-way mixing valves, temperature sensors and transmitters, valves, strainers, louvers, filter frames, air-actuated discharge dampers with motors, LPBS, power and control cables, and all necessary instrumentation and accessories as per the approved drawings and technical specifications. Supply of Pre & HEPA filter is not in scope of this tender. Capacity: 190 TR , Dehumidified air quantity: 40000 CMHFan static: 100mm WC @STP |
| 15 | M.S. Support - Procurement of material, Preparation of fabrication drawings and site erection drawings, Fabrication (including welding, drilling, threading) Inspection, Site Installation and Erection of MS Supports for ducts, plenums, structural supports, ducts stiffeners, bracings, dampers along with surface cleaning, epoxy primer and epoxy painting (angle/ channel/ plate/ pipe/ rod / GI rod / fasteners/ EPs etc.) as per the approved drawings and technical specification.All the consumables will be in the scope of vendor. |
| 16 | Supply Duct (GI, 1 mm thk, Grade 180 gm/m2 Zinc Coating): Procurement of material, Preparation of fabrication drawings and site erection drawings, Fabrication, Inspection, Site Installation and complete erection with supports out of angles / channels /rods, anchor fasteners wherever required, GS nuts, bolts, gaskets, testing and as per the technical specifications and site requirement. This cost will be based on the weight of actual GI sheet used. However, reinforcement & support material & its fabrication cost will be paid separately as per item no. 7. |
| 17 | Supply A/C Duct for Operating gallery and other areas with insulation (GI, 1 mm thk, 180 gm/m2 Zinc Coating): Procurement of material, Preparation of fabrication drawings and site erection drawings, Fabrication, Inspection, Insulation, Site Installation and complete erection with supports, and testing as per the technical specifications. This cost will be based on the weight of actual GI sheet used. * No separate cost shall be paid for insulation. However, reinforcement & support material & its fabrication cost will be paid separately as per item no. 7. |
| 18 | Return/exhaust air duct (M.S. 3 mm thick): Procurement of material, Preparation of fabrication drawings and site erection drawings, Fabrication, Inspection, Site Installation and complete erection with supports out of angles / channels /rods, anchor fasteners wherever required, all welded joints with its supports, testing, painting as per the technical specifications & approved drawings. This cost will be based on the weight of actual MS sheet used. However, reinforcement & support material & its fabrication cost will be paid separately as per item no. 7. |
| 19 | SS 304L, 3 mm thick Exhaust duct with insulation : Procurement of material (Other than FIM), Preparation of fabrication drawings and site erection drawings, pickling & passivation, Fabrication, Inspection, Site Installation and complete erection with supports, poison plate, testing, painting of MS structure as per the technical specifications & approved drawings. This cost will be based on the weight of actual SS 304L sheet used.* SS 304L plates/sheets/coil will be given as FIM by department and the cost will be based on the weight of actual SS 304L sheet. * Remaining all SS parts & consumables will be Procured (supply) by the contractor. * No separate cost shall be paid for insulation. However, MS support material & its fabrication cost will be paid separately as per item no. 7 & SS support, plates, bracing/Stifnerss material will be paid as per the item no. 14. |
| 20 | Supply air plenum/duct (M.S. 5 mm thick): Procurement of material, Preparation of fabrication drawings and site erection drawings, Fabrication, Inspection, Site Installation and complete erection with supports out of angles /channels/rods, anchor fasteners wherever required, all welded joints with its supports, testing, painting as per the technical specifications & approved drawings. This cost will be based on the weight of actual MS sheet used. * However, reinforcement & support material & its fabrication cost will be paid separately as per item no. 7. |
| 21 | SS 304L, 3 mm thick for ducting for supply and exhaust ducting inclusive of SS outside building duct and UG Vault duct: Procurement of material (Other than FIM), Preparation of fabrication drawings and site erection drawings, pickling & passivation, Fabrication, Inspection, Site Installation and complete erection with supports, poison plate, testing, painting of MS structure as per the technical specifications & approved drawings. This cost will be based on the weight of actual SS 304L sheet used.* SS 304L plates/sheets/coil will be given as FIM by department and the cost will be based on the weight of actual SS 304L sheet. * Remaining all SS parts & consumables will be Procured (supply) by the contractor.However, MS support material (for SS duct routed outside the building only) & its fabrication cost will be paid separately as per item no. 7 & SS support, bracing/Stifnerss material will be paid as per the item no. 14. |
| 22 | SS Support for SS ducts routed inside the UG vault, SS ducts stiffeners & bracings (angle/ channel / plate/ pipe / rod / fasteners/E.P etc.). This item includes procurement of materials, preparation of fabrication drawings & site erection drawings, pickling & passivation, Fabrication, Inspection, site installation & erection of UG vault SS duct support and stiffeners as per technical specification & drawing. |
| 23 | Flow balancing dampers for supply ducts, AC ducts and exhaust ducts (minimum 3mm thick Aluminium powder coating with gear operated manual operated): procurement, supply, installation, erection, testing and commissioning as per the technical specifications & approved drawings. * Cost is based on cross section area of the duct in which damper is installed. |
| 24 | Supply air grilles with opposed blade volume control dampers (VCD), (18G thk. blade Aluminium with powder coating): procurement, supply, installation, erection and testing as per the technical specifications & approved drawings. * Cost is based on the cross section area of the grill. |
| 25 | Conditioned air diffuser with opposed blade volume control dampers (VCD), (18G thk. blade Aluminium with powder coating): procurement, supply, installation, erection and testing and as per the technical specifications & approved dwg. * Cost is based on the cross section area of the grill. |
| 26 | Exhaust air grilles with opposed blade volume control dampers (VCD), BWG (brick wall grilles) and MOC as 1.6mm thk MS with powder coating: procurement, supply, installation, erection and testing as per the technical specifications & approved drawing. * Cost is based on the cross section area of the grill. |
| 27 | Exhaust air grilles with opposed blade volume control dampers (VCD), DG (Door grilles) and MOC as 18G thk Aluminium blade with powder coating: procurement, supply, installation, erection and testing as per the technical specifications & approved drawing. * Cost is based on the cross section area of the grill. |
| 28 | Exhaust air grilles with opposed blade volume control dampers (VCD) and MOC minimum 16G SS: Procurement, supply, installation, erection and testing as per the technical specifications. * Cost is based on the cross section area of the grill. |
| 29 | Supply, Installation, Testing and Commissioning of Propeller Fans complete with motor, cables, installation frame with vibration pad, epoxy painted, wall cowl etc. and electrical wiring with plug top from the nearest socket point for fans as per the specifications. |
| 30 | Propeller Fan Capacity 500 m3/hr @ static pressure 5mm WG (Exhaust fan) |
| 31 | Propeller Fan Capacity 1000 m3/hr @ static pressure 5mm WG (Exhaust fan) |
| 32 | Propeller Fan Capacity 2000 m3/hr @ static pressure 5mm WG (Exhaust fan) |
| 33 | Propeller Fan Capacity 2,500 m3/hr @ static pressure 5mm WG |
| 34 | Tube axial Fan Capacity 2000 m3/hr @ static pressure 10 mm WG (Exhaust fan) |
| 35 | Propeller Fan Capacity 4000 m3/hr @ static pressure 5mm WG (Exhaust fan) |
| 36 | Threaded MS nozzle : Procurement, Supply, fabrication, threading, testing and installation of 15 NB (200mm length) threaded MS nozzle with metallic cap on branches of supply and exhaust duct / Plenum as per requirement. |
| 37 | MS plate EPs: Procurement, Supply, fabrication, installation & erection of MS plate EPs along with GI Coated anchor fasteners (reputed make) as per standard specifications. (Size M12 x minimum length 110mm as per code ACI 349 and NQA-1) |
| 38 | MS EP (250x250x12mm thk) |
| 39 | MS EP (200x200x10mm thk) |
| 40 | Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 41 | Providing 12 mm thick Internal plastering in cement mortar 1:4 without cement punning (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete. |
| 42 | Measurement Instrument: Procurement and Supply of complete set of measurement instrument with calibration certificate for commissioning of the ventilation system. The instruments include (i) Hot Wire Anemometer - 3 Nos. (ii) Vane Type Anemometer - 3 Nos. (iii) Digital Manometer - 2 Nos. (iv) Vibrometer - 2 Nos. (v) Tachometer - 2 Nos. (vi) Non-contact type thermometer - 2 Nos.(vii) dB meter - 2 Nos. |
| 43 | Air flow balancing, testing and commissioning of entire Ventilation System Block 102A inclusive of supply and exhaust system as per the technical specification. |
| 44 | Air flow balancing, testing and commissioning of entire Ventilation System Block 102B inclusive of supply and exhaust system as per the technical specification. |
| 45 | Air flow balancing, functional testing of Ventilation System inclusive of supply and exhaust system of Block-105 and Block-106 as per the technical specification. |
| 46 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2mm thick sheet steel having 150 mm width, side channel of 100mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories (Couplers / Tees / bends / cross member / connectors, nuts and bolts) as per requirement at site and attached technical specification. |
| 47 | Supply |
| 48 | Installation |
| 49 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2mm thick sheet steel having 300 mm width, side channel of 100mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per requirement at site and attached technical specification. |
| 50 | Supply |
| 51 | Installation |
| 52 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2mm thick sheet steel having 450 mm width, side channel of 100mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories (Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per requirement at site and attached technical specification. |
| 53 | Supply |
| 54 | Installation |
| 55 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2mm thick sheet steel having 600 mm width, side channel of 100mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories (Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per requirement at site and attached technical specification. |
| 56 | Supply |
| 57 | Installation |
| 58 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2.5mm thick sheet steel having 750 mm width, side channel of 100mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories (Couplers / Tees / bends / cross member / connectors, nuts and bolts) as per requirement at site and attached technical specification. |
| 59 | Supply |
| 60 | Installation |
| 61 | Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2mm thick sheet steel having 150 mm width, side channel of 100mm, cross perforation not more than 17.5%, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per requirement at site and attached technical specification. |
| 62 | Supply |
| 63 | Installation |
| 64 | Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2mm thick sheet steel having 300 mm width, side channel of 100mm, cross perforation not more than 17.5%, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per requirement at site and attached technical specification. |
| 65 | Supply |
| 66 | Installation |
| 67 | Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2mm thick sheet steel having 450 mm width, side channel of 100mm, cross perforation not more than 17.5%, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per requirement at site and attached technical specification. |
| 68 | Supply |
| 69 | Installation |
| 70 | Supply and installation of ladder type FRP cable tray having 150mm width, min 5mm thick, side channel of 50mm and rungs spaced at not more than 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached technical specification. |
| 71 | Supply of ladder type FRP cable tray having 150 mm width |
| 72 | Installation of ladder type FRP cable tray having 150 mm width |
| 73 | Supply and installation of ladder type FRP cable tray of following size having min 5mm thick, side channel of 100mm and rungs spaced at not more than 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached technical specification. |
| 74 | Supply of ladder type FRP cable tray having 300 mm width |
| 75 | Installation of ladder type FRP cable tray having 300 mm width |
| 76 | Supply of ladder FRP cable tray of 450 mm width |
| 77 | Installation of Ladder FRP cable tray of 450 mm width |
| 78 | Supply and installation of perforated type FRP cable tray of following width having min 5mm thick FRP sheet with channel of 100mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member /clampig with cable tray/ connectors, nuts and bolts ) as per attached technical specification. |
| 79 | Supply of perforated FRP cable tray of 150 mm width |
| 80 | Installation of perforated FRP cable tray of 150 mm width |
| 81 | Supply of perforated FRP cable tray of 300 mm width |
| 82 | Installation of perforated FRP cable tray of 300 mm width |
| 83 | Supply and Installation of Hot dip Galvanised dome type cable tray cover of following size fabricated out of 2.5mm thick sheet steel , single length not less than 2.5mtr with suitable cable tray clamps and other accessories such as horizontal bend, Tee, Cross, Reducer, Vertical bend (Inside and Outside) |
| 84 | 150 mm (W), 15 mm (SH) |
| 85 | 300 mm (W), 15 mm (SH) |
| 86 | Supply and fixing of 25mm x 6mm GI strip along tray using suitable size GI saddel/clamp including interconnection, hardwares, etc as required . |
| 87 | Supply |
| 88 | Installation & Testing Please Enable Macros to View BoQ information |
