|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto1.5 m, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 4 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc |
| 5 | 40 mm dia nominal bore |
| 6 | 50 mm dia nominal bore |
| 7 | 65 mm dia nominal bore |
| 8 | 80 mm dia nominal bore |
| 9 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete |
| 10 | 25 to 40 mm nominal bore |
| 11 | 50 to 80 mm nominal bore |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 13 | 40 mm nominal bore |
| 14 | 50 mm nominal bore |
| 15 | 65 mm nominal bore |
| 16 | 80 mm nominal bore |
| 17 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : |
| 18 | 40 mm nominal bore |
| 19 | 50 mm nominal bore |
| 20 | 65 mm nominal bore |
| 21 | 80 mm nominal bore |
| 22 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 23 | 40 mm nominal bore |
| 24 | 50 mm nominal bore |
| 25 | 65 mm nominal bore |
| 26 | 80 mm nominal bore |
| 27 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main |
| 28 | 20 mm nominal bore |
| 29 | 25 mm nominal bore |
| 30 | Labour for cutting C.I. pipe with steel saw |
| 31 | 100 mm diameter C.I. pipe |
| 32 | 150 mm diameter C.I. pipe |
| 33 | 250 mm diameter C.I. pipe |
| 34 | 300 mm diameter C.I. pipe |
| 35 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : |
| 36 | 100 mm diameter pipe |
| 37 | 150 mm diameter pipe |
| 38 | 250 mm diameter pipe |
| 39 | 300 mm diameter pipe |
| 40 | Supplying pig lead at site of work |
| 41 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : |
| 42 | Class I |
| 43 | 100 mm diameter |
| 44 | 150 mm diameter |
| 45 | 250 mm diameter |
| 46 | 300 mm diameter |
| 47 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 48 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 49 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 50 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 51 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : |
| 52 | 100 mm dia Ductile Iron Class K-7 pipes |
| 53 | 150 mm dia Ductile Iron Class K-7 pipes |
| 54 | 250 mm dia Ductile Iron Class K-7 pipes |
| 55 | 300 mm dia Ductile Iron Class K-7 pipes |
| 56 | 150 mm Mechanical joint |
| 57 | TOTAL QUANTITY |
| 58 | Providing and fixing Ductile Iron (DI) double socket Mechanical Joint including the cost of all jointing material i.e. 2 Nos. of Ductile Iron glands, 2 Nos. SBR/EPDM Rubber Gasket and required number of High-Strength T-Head Bolts & Nuts etc. |
| 59 | 100 mm Mechanical joint |
| 60 | 150 mm Mechanical joint Please Enable Macros to View BoQ information |
