|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. etc complete all as specified and as directed |
| 3 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed et complete all as specified and as directed |
| 4 | Excavation in post holes in soft loose soil each not exceeding 0.5 CUM, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50 meter and making good surface complete all as directed |
| 5 | Material and labour for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 6 | Materials and labour for RCC (1:1.5:3) type A1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 7 | Materials and labour for RCC (1:1.5:3) type A1 (using 20 mm graded crushed stone aggregate) as in Beam,cantilevers, lintels complete all as specified and as directed. |
| 8 | Material and labour for plain cement concrete Type D-2 1:4:8 (with using 40 mm graded stone aggregates) as in foundations and mass concrete etc complete all as specified and as directed |
| 9 | Material and labour for providing plain cement concrete 1:2:4 type B-0 (with using 12.50 mm graded stone aggregate ) as in surface channels and drains complete all as specified and directed. |
| 10 | Material and labour for Pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate as) in landings, cover slab (for manholes / drain cover etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 11 | Material and labour for providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 12 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed |
| 13 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed |
| 14 | Material and labour for Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 15 | Material and labour for Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc complete all as specified and as directed |
| 16 | All as per item No 15 aobve, but except brick, |
| 17 | Material and labour Brickwork (Old size Brick)with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed |
| 18 | All as per item No 17 aobve, but except brick, |
| 19 | Materials and labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 20 | Materials and labour for form work having fair finished surfaces to soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 21 | Materials and labour for form work to sides of Beam lintels roof beam shelves incl rough finished surfaces of concrete complete all as specified and as directed. |
| 22 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS tube in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and as directed. |
| 23 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS Tube for top & bottom rails MS Frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm thick width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheet beading & joined together with solvent cement supplied & fixed in the frame at site as per specifications and drawing complete all as specified and as directed. |
| 24 | Supply and fixing 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed. |
| 25 | Supply and fixing aluminium bow handle,cast type,anodised 100mm long fixed with steel screws complete all as specified and as directed. |
| 26 | Supply and fixing 100mm size butt hinges, medium weight, aluminium complete all as specified and as directed. |
| 27 | Materials and labour for mild steel TMT bar of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 28 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 29 | Material and labour Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 30 | Supply and fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed. |
| 31 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular Materials and labour sections/ appropriate Z sections and other sections of approved make confoRMing to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and as directed. |
| 32 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 33 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 34 | Supply and fix of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 as in main and cross beams, hip and jack rafters; purlins, truss where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 35 | Supply and fixing suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of EACH main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to foRM 600mm x 600 mm grid complete all as specified and as directed. |
| 36 | Materials and labour for Prelaminated particle board BWR type 12 mm thick, interior grade, prelaminated both side for door /partition, with decorative choice lamination fixed with necewwary fittings, gusket, angle clearts, screw etc complete all as specified and as directed. |
| 37 | Materials and labour for non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. of item all as directed. |
| 38 | Materials and labour for Coloured/Printed Glazed Ceramic Tiles 450x300x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. |
| 39 | Materials and labour vitrified ceramic tiles 9 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. and directed. |
| 40 | Materials and labour for 50 mm thick PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. . |
| 41 | Materials and labour for pre-polished cement concrete chequered tiles area of each tiles exc 0.06 SQM but n exc 0.11 SQM and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 42 | Materials and labour for 100mm thick cement concrete 1:2:4, type B-2, (using 40 mm graded stone aggregate) as in floor, hard standing finished even and fair without using extra cement (for disturbed portion of Hard standing). complete all as specified and as directed. |
| 43 | Material and labour for 75 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor etc, finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 44 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 45 | Materials and labour for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces on wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 46 | Materials and labour for preparation of new plaster surface of wall and applying 2 coats of acrylic distember over 1mm thick wall care putty on wall and a coat of alkali resistant priming paint complete all as specified and as directed. |
| 47 | Supply and fixing frosted glass 4 mm thick ordinery quality and glazing with oil putty in sqaure n exc 0.50 sq. m in each pane complete all as specified and as directed. |
| 48 | Material and labour for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 49 | Material and labour for 300 mm dia Reinforced concrete pipes, class NP-3, laid and jointed complete with collars etc complete all as specified and as directed |
| 50 | Material and labour for 450mm dia Reinforced concrete pipes, class NP-3, laid and jointed complete with collars etc complete all as specified and as directed |
| 51 | Material and labour for 600mm dia Reinforced concrete pipes, class NP-3, laid and jointed complete with collars etc complete all as specified and as directed |
| 52 | Supply and fixing looking mirror 5.0mm thick of size 450x600mm, fixed with chromium plated brass spacers 25mm to 30mm in size (One EACH Corner) including rounding the edges of the mirror and complete all as specified and as directed. |
| 53 | Supply and fixing rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified and as directed. complete all as specified and as directed. including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and complete all as specified and as directed. |
| 54 | Supply and fixing stop valves,/ angle valves cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore dia complete all as specified and as directed. |
| 55 | Supply and fixing Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and complete all as specified and as directed. |
| 56 | Supply and fixing floor mounted trap EWC rimless bowl with side flush cistern for coupled WC, slim soft close seat cover, hinge signal flush cistern water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set etc complete all as specified and as directed. : |
| 57 | Supply and fixing 15mm dia health faucet ABS body with 08mm dia , 01 mtr long flexible tube and wall hook complete all as specified and as directed. |
| 58 | Supply and fix steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 59 | Supply and fix steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 60 | Supply and fixing PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified and as directed. |
| 61 | Supply and fixing 15mm bore, bib taps, fancy type cast copper alloy Chromium plated screwed down for iron pipe for brass ferrule and fixed complete all as specified and as directed. |
| 62 | Supply and fixing vitreous china table top wash hand basin, white/coloured table top size 450X370X145 mm including necessary CP waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified and as directed. |
| 63 | Supply and fixing 15mm bore, central hole mixer, fancy type cast copper alloy Chromium plated screwed down for iron pipe for brass ferrule and fixed complete all as specified and as directed. |
| 64 | Supply and fixing towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 65 | Supply and fixing PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors including haunching complete all as specified and as directed. |
| 66 | Supply and fixing PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete all as specified and as directed. |
| 67 | Supply and fixing PVC (SWR) 110mm bore bend, any radius complete all as specified and as directed. |
| 68 | Supply and fixing PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in in wall complete all as specified and as directed. |
| 69 | Materials and labour for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for 110mm dia complete all as specified and as directed. |
| 70 | Supply and fixing PVC Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) complete all as specified and as directed. |
| 71 | Supply and fixing PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed. |
| 72 | Materials and labour for toilet paper holder with flat recessed type stainless steel toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 73 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 74 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 75 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 76 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 77 | Materials and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FR-LSH grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate (for modular Switch socket) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed. |
| 78 | All as per serial item No 77 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and as directed. |
| 79 | Supply and fixing switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and as directed. |
| 80 | Supply and fixing modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 81 | Supply and fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed complete all as specified and as directed. |
| 82 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 83 | Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 84 | Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 85 | Supply and fixing MCB DB of sheet metal enclosure double door SPN 4 way IP -43 with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 86 | Supply and fixing MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 87 | Supply and fixing MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 88 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm complete all as specified and as directed. |
| 89 | Supply and fixing LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and as directed. |
| 90 | Materials and labour for building secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and as directed. |
| 91 | Earthing complete all as specified and as directed.with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 92 | Supply and fixing 20mm dia galvanised steel tubes medium grade with all fittings and fixed complete walls and ceilings and laid in floors complete all as specified and as directed. |
| 93 | Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed. |
| 94 | Cutting existing steel tubing of 40mm for alterations or additions complete all as specified and as directed. |
| 95 | Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2.0 core laid in trenches /floor or fixed on wall /pole including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 96 | Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid) |
| 97 | Materials and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified and as directed. Please Enable Macros to View BoQ information |
