|
| 1 | Taking down cement plaster on stone masonry/Brick Masonry incl racking out joints, hacking for key scrubbing down with water and direction by Engr- In Charge. |
| 2 | Demolition of cement Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed |
| 3 | M&L cement concrete in foundation, type D-2, 1:4:8 (40mm graded crushed stone aggregate) , filling and mass concrete as specified and directed. |
| 4 | M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping,benching/ channels of manholes including demolition of existing pcc etc complete all as specified and directed |
| 5 | Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed. |
| 6 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified as directed. |
| 7 | M&L for precast-cement concrete block masonary with solid blocks type C-1 ,1:3:6 (20mm graded aggregates) exc 10 cm in width and setting in CM 1:6 ,complete all as specified and directed |
| 8 | Extra over stone walling for hammer dressing to face granite or trap stones with maximum depression on face from a straight edge held against the dressed surface not exceeding 20mm and dressing face beds and joints as specified of random rubble walling un-coursed or brought upto courses complete all as specified and as directed . |
| 9 | M&L rendering 15mm thick in CM 1:4 on stone masonry surfaces, finished even and fair without using extra cement mixed with water proofing compound as per manufacturer instructions complete all as specified and directed. Note - Water proffing compound will be measured and paid separately. |
| 10 | M&L for 10 mm rendering in CM 1:4 on other than fair face of brick work or on concrete surface with water profinfing compound. complete all as specified and directed. Note - Water proffing compound will be measured and paid separately. |
| 11 | Supply only liquid water proofing compound ( For external new plaster surfaces) |
| 12 | S & F mild steel work as in angle iron , Tee etc as in posts & strut in fencing including cutting tops to shape, drilling holes notching for wire etc flat iron fillets for securing wire mess etc including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-410-0 or Fe-310-0 (Make Tara or equivilant) |
| 13 | M&L mild steel screw bolts (machine Made) with hexagonal or square heads at one end and screwed the other to be fitted with washer and one hexagonal or square nut exc 5cm and n exc 10cm long, dia of neck 11-15 mm complete all as specified and as directed. |
| 14 | Supply only chain link MS galvanized fencing size or type all as specified by Engr-in-charge. |
| 15 | Fixing only chain link fencing including line wires any mesh size and type of standard rails complete all as specified and as directed. |
| 16 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 17 | Dismantling of posts or struts (wood, steel or RCC) any section embadded in concrete, including taking out embedded portion incl barbed wire and making good disturbed ground complete all as specified and as directed. |
| 18 | Dismantling of Asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified & directed by Engineer in charge. |
| 19 | S&F Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed |
| 20 | Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed |
| 21 | S&F for hollow,rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed. |
| 22 | S&F framed work as in gate etc of angle,tubular or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering prepared for hanging or sliding with and including either hooks & hinges for steel hanging door fitings complete all as specified and as directed. |
| 23 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint as Camoflage pattern over a one coat of of external primer.complete all as specified & as directed by engr-in-charge. |
| 25 | S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on trenches or in floors /wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 26 | S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on trenches or in floors /wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
