Tender For Petty Repair Including Day To Day Maintenance To Single Living Billets, Messes, Smc And Other Otm Bldg In Domestic Area At Air Force Station Utarlai
Tender Value
30 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
10 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Utarlai → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair Including Day To Day Maintenance To Single Living Billets, Messes, Smc And Other Otm Bldg In Domestic Area At Air Force Station Utarlai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jun-2026 | AMD2 | Date | 04-Jul-2026 |
| 2 | 27-Jun-2026 | AMD3 | Date | 09-Jul-2026 |
| 3 | 20-Jun-2026 | AMD2 | Date | 04-Jul-2026 |
| 4 | 02-Jul-2026 | AMD4 | Date | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Attending plumber complaints and rectify defects (i.e flushing cistern leakage from down pipe, flush handle, PVC connection, stop valves, Leakage of bib taps, Wall mixer, basin mixer, stop/ angle cock, Pipe line leakages, air lock etc including provision of all type of washers, rubber cone, M-seal spindle for Bib tap/stop cock/mixture with necessary tools & plant and made functional to entire satisfaction of user/Engr-in-charge(Complaint register maintained by supervisor of the contractor ). complete all as specified and directed by Engr - in-charge. |
| 2 | Attending carpenter complaints (i.e tightening of loose door/window/cup board hinges, and refixing of loose sliding bolts/tower bolt/handle, refixing of loose pelmet & curtain rod/brakets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plant and made functional to entire satisfaction of user/Engr-in-charge (Complaint register maintained supervisor of by the contractor). Complete as specified and directed by Engr-in-charge.Note for item Nos 1.00 and 2.00: plumber and carpenter complaints shall be attended and rectified within 48 Hours of handing over of complaint slip. However, certain complaints, if declared as urgent by the Engineer in Charge, shall be attended and rectified by the contractor on the same day (within 24 hrs). Violation of this timeline shall attract a penalty of Rs. 250.00/Per complaint per day on the contractor. |
| 3 | M&L for renewing ceramic tiles any type and any size in pathches, area n exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles incl dismantling of old tiles. Complete as specified and directed by Engr-in-charge. |
| 4 | Taking down aluminium doors/Window shutters carrying out minor repairs/adjustments including rubber beading, aluminium beads, cleats of required size and refixing in same position incl S&F of neccesary items such as handle, rubber beading, aluminium bead/cleats and similar work. complete all as specified and directed. |
| 5 | M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in PCC work, level course & similar work, benching kerbs of mud stops, rounded or chamfered on edges with necessary form work including demolition of cement concrete of any description and in any position not otherwise specificaqlly . Complete as specified and directed by Engr-in-charge. |
| 6 | M&L for 10mm thick rendering in CM 1:6 on brick/concrete wall surfaces finished even and smooth without using extra cementincluding taking down cement plaster on block or concrete walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge. |
| 7 | M&L for preparation on new plaster surface of walls & applying two coat of cement base paint up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge. |
| 8 | S&F fixed in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in door and steel window including removal of exiting U/S wire cloth with screw suitabal for fixing. Complete as specified and directed by Engr-in-charge. |
| 9 | Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane Complete as specified and directed by Engr-in-charge. |
| 10 | M&L sheet glass 4.8 - 5 mm thick ordinary quality and glazing with and including aluminium corner clip and similar items up to G+2 height bldg.Complete as specified and directed by Engr-in-charge. |
| 11 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. Complete as specified and directed by Engr-in-charge. |
| 12 | S&F in repair door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 6.1 to 8.0 Kg and fixed, Complete as specified and directed by Engr-in-charge. |
| 13 | S & F in repair Aluminium anodised barrel tower bolts of extruded section, 200mm long Complete as specified and directed by Engr-in-charge. |
| 14 | S & F in repair Aluminium anodised barrel tower bolts of extruded section, 150mm long Complete as specified and directed by Engr-in-charge. |
| 15 | S & F in repair Aluminium anodised fabricated type handle of extruded section, 150mm long Complete as specified and directed by Engr-in-charge. |
| 16 | S & F in repair mild steel butt hinges 100mm size cold rolled medium weight welded or screw to framed and shutter. Complete as specified and directed by Engr-in-charge. |
| 17 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm,Complete as specified and directed by Engr-in-charge. |
| 18 | S & F in repair stove enamelled black mild steel handles Left or right for steel window/ventilators Complete as specified and directed by Engr-in-charge. |
| 19 | S&F in repair 200 mm long mild steel ordinary helical door spring including roller and roller plate, Complete as specified and directed by Engr-in-charge. |
| 20 | S&F in repair 12 mm thick veneered decorative plywood with laminate both side,, ISI marked as in cupboard shutter / shelves, one side with decorative choice lamination and other side balancing white lamination including 6mm thick teak wood liping, including timber frame of suiatable size fixed with screws to timber frame work. Complete as specified and directed by Engr-in-charge. |
| 21 | S&F in repair 12 mm thick plywood grade BWR, type BB, , ISI marked as in cupboard shutter / shelves, including 6mm thick teak wood liping at edges or as directed, including fixing in MS/timber frame of suiatable size fixed with screws to timber frame work. Complete as specified and directed by Engr-in-charge. |
| 22 | M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer, Complete all as specified and directed by Engineer-in-Charge. |
| 23 | S & F in repair stainless steel curtain rails/rod 25mm bore decorative type fixing with decorative type stainless steel brackets and stainless steel end blub, etc (Sample as approved by Engr-in-charge).Complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for welding in repair n. exc. 10 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed. |
| 25 | S&F in repair of aluminum door lock Aluminium vertical type 100mm, 4 lever suitable for aluminum doors with duplicate key.Complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in repair of Cupboard shutters lock brass vertical type 75mm grade I, 4 lever suitable for steel shutters with duplicate key.Complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F in repair of mortice lock brass type vertical type 65mm grade I, 4 lever suitable for any type of door shutters with duplicate key.Complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&Fin repair SS decorative type peg set (06 of peg in one set over SS plat) as per sample approved by Engr-in-charge. |
| 29 | S&F in repair 0.56 mm Plain, Aluminium sheeting, Alloy 31000 H4 fixed on wooden door, cupboard and similar work, ridges, hips, valley gutter, drip and straight flashing on roof and wall (length and girth as fixed) all as specified and directed. |
| 30 | S&F in repairs, PVC decorative type toilet cabinet with mirror of overall size 350 x 450mm complete all as specified and directed. |
| 31 | S&F in repair decorative type with decorative beading beveled edge mirror 3-5 mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified & directed. |
| 32 | Refixing old stee tubing after cleaning old steel water tubing 15mm bore and connection new or old position fixed to wall/ceiling or laid in floors including taking up or down existing steel water tubing. Complete as specified and directed by Engr-in-charge. |
| 33 | Refixing old stee tubing after cleaning old steel water tubing 20mm bore and connection new or old position fixed to wall/ceiling or laid in floors including taking up or down existing steel water tubing. Complete as specified and directed by Engr-in-charge. |
| 34 | Refixing old stee tubing after cleaning old steel water tubing 25/32mm bore and connection new or old position fixed to wall/ceiling or laid in floors including taking up or down existing steel water tubing. Complete as specified and directed by Engr-in-charge. |
| 35 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres. Complete as specified and directed by Engr-in-charge. |
| 36 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres.Complete as specified and directed by Engr-in-charge. |
| 37 | S&F in repair for 500 litres capacity tripple layer rotational moulded white colour polyethylene tripple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe including taking down old water tank. Complete as specified and directed by Engr-in-charge. |
| 38 | S&F in repair for 1000 litres capacity tripple layer rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified in SSR Part I. Complete as specified and directed by Engr-in-charge. |
| 39 | S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. Complete as specified and directed by Engr-in-charge. |
| 40 | S&F in repair PVC water tank cover best quality suitable for 500 &1000 Ltrs capacty water tank. Complete as specified and directed by Engr-in-charge. |
| 41 | S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe. Complete as specified and directed by Engr-in-charge. |
| 42 | S&F in repair 25mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe.Complete as specified and directed by Engr-in-charge. |
| 43 | S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia wast coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including CI brackets all directed. |
| 44 | Fixing in repairs, vitreous China wash hand basin, including supply of MS bracket and other similar item for fixing the same etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement work including CI brackets all directed. Complete as specified and directed by Engr-in-charge. |
| 45 | S&F in repair vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc comple incl making good to floor. |
| 46 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with \\"P\\" or \\"S\\" Trap front or back inlet fixing bols, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete as directed. |
| 47 | S&F in repair PVC EWC sheet cover fitted to any type of EWC. Complete as specified and directed by Engr-in-charge. |
| 48 | S&F in repairs Vitreous China urinal bowl type flat back or angle back type, size( 465x355x265m) complete including providing and fixing plugs,waste pipe 32mm dia ,bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified. |
| 49 | Fixing in repairs Vitreous China urinal bowl any type flat back incliding supply of cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar and making good complete all as specified. |
| 50 | S&F in repair floor trap/nahani trap of cast iron with CP grating incl jointing to waste pipe in cement mortar, dia meter of outlet is 100 mm, complete all as specified and directed. |
| 51 | S & F in repair superior quality PVC waste pipe , 32/40 mm bore, 1000mm long, suitable for urinal/sink/WHB and similar work.complete all as specified and directed. |
| 52 | S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets. |
| 53 | Fixing only in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets. |
| 54 | S&F in repairs flushing jet CP for pedestal pattern wc incl.flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1000 mm long b/w dia & fixed complete. |
| 55 | S&F in repair CP brass swival type shower rose 125mm size with one stainless steel wall flange and shower arm, including fixing to GI pipe or union, complete all as specified and directed. |
| 56 | Fixing only in repair any type shower rose any size with one stainless steel wall flange and shower arm, including fixing to GI pipe or union, complete all as specified and directed. |
| 57 | S&F in repairs chromium plated tubular towel rail 20 mm dia, D type 60 CM long complete all as specified and directed. |
| 58 | Fixing only in repairs chromium plated tubular towel rail 20 mm dia, D type 60 CM long complete all as specified and directed. |
| 59 | S&F in repair CP fancy type bib taps 15mm long body bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 60 | Fixing only in repair fancy type bib taps 15mm bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union including CP nipple if required. complete all as specified and directed. |
| 61 | S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed. |
| 62 | S&F in repair CP pillar taps fancy type (long neck/swan neck type) , of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 63 | Fixing only in repair CP pillar taps fancy type , of 15 mm dia, cast copper alloy, , screwed for iron pipe and fixed. Complete all as specifed and directed by Engr-in-charge. |
| 64 | S&F in repair 15mm bore CP angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 65 | Fixing only in repair 15mm bore CP angle valve cast copper alloy screwed down screwed both ends for iron pipe or for union complete all as specified and directed. |
| 66 | S&F in repair two way CP angle valve 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed. |
| 67 | S&F in repair fancy type CP wall mixer for mixing hot & cold water, with L band for provn of over head hower arrangement, chromium plated brass with three joints, screwed to iron pipe or for unions, 15 mm bore and fixed with two stainless steel wall flange, complete all as specified and directed. |
| 68 | S&F in repair fancy type mixing valve, chromium plated brass, centre hole basin mixer, screwed and jointed to PVC connection with nuts in wash hand basin, 15 mm bore, complete all as specified and directed. |
| 69 | S&F in repair 32mm dia waste coupling of CP (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) Ditto but suitable for urinals (Minimum weight 32mm-45gms) |
| 70 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets coupling & waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 200mm complete all as specified and directed. |
| 71 | S&F stainless steel utensil plate rack of size 900x1000x200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed. |
| 72 | S&F in repair CP hand spray (health facucet with 1.0 M long easy flex tube in chrome finish and wall hook) complete all as specified and directed |
| 73 | Fixing only in repair CP hand spray. complete all as specified and directed |
| 74 | S&F in repair PVC syphon with handle for PVC flushing cistern, any capacity, complete all as specified and directed. |
| 75 | S&F in repair PVC connections, 600 mm long with two PTMT nuts and washers, suitable for connecting 15 mm bore pipes, complete all as specified and directed. |
| 76 | S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 77 | S&F in repairs CP grating doom of 100/110 mm dia, made of stainless steel with or without waste pipe hole, complete all as specified and directed. |
| 78 | S&F in repair CP soap dish of any type, fixed with PVC rawl plug and stainless steel screws, complete all as specified and directed. |
| 79 | S&F 8mm thick Corner glass shelf (200mm long in corner), with 150mm long decorative type SS F bracket 02 Nos set in each shelf . all as specified and directed. |
| 80 | S&F 8mm thick straight glass shelf 600mm long and 200mm wide, with 150mm long decorative type SS F bracket 02 Nos set in each shelf . all as specified and directed. |
| 81 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete. |
| 82 | S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed |
| 83 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. Complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised . |
| 85 | S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 86 | S&F 150mm long aluminum alloy handles, anodized complete as specified. |
| 87 | S&F galvanised iron steel water tubing 15mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel water tubing alongwith connection fixed/laid in any situation.Complete as specified and directed by Engr-in-charge. |
| 88 | S&F galvanised iron steel water tubing 20mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel water tubing alongwith connection fixed/laid in any situation.Complete as specified and directed by Engr-in-charge. |
| 89 | Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar up to 110 mm dia. Complete as specified and directed by Engr-in-charge. |
| 90 | S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall. Complete as specified and directed by Engr-in-charge. |
| 91 | S&F 110 mm PVC (SWR) bends any redius with access door. Complete as specified and directed by Engr-in-charge. |
| 92 | S&F 110 mm PVC (SWR)couplers for pvc pipe and similar work. Complete as specified and directed by Engr-in-charge. |
| 93 | S&F 75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall. |
| 94 | S&F 75 mm PVC (SWR) bends any redius with access door. Complete as specified and directed by Engr-in-charge. |
| 95 | M&L for preparation on old untreated roof surface any description and any position and applying one coats of alluminium paint over one coat of alluminium paint primer on APP membrane up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge. |
| 96 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each .Complete all as spcified. |
| 97 | S&F 35mm thick panelled shutters, (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board mediu density, wood particle board with commercial face veneers fitted to fhowkats.. complete all as specified & directed by Engineer-in-Charge. |
| 98 | S&F 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2st class haed wood). complete all as specified & directed by Engineer-in-Charge |
| 99 | S&F galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 100 | M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer, Complete all as specified and directed by Engineer-in-Charge. |
| 101 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for . Complete all as secified and directed by Engr-In-chage. |
| 102 | S&F for framed brackets of angles or tees with web and flanges cut to shape for shed work, cooler stand, water tank staging up to G+2 bldg and simiar work, drilled and countersunk for screw, including beding and welding angles as neceesry gusset plates riveting etc oncforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge. |
| 103 | M&L for preparation new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Jul 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Jul 04, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Jul 13, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender