Tender For Repair Of Steel And Wooden Furniture At Rangia, Hattigor, Tamulpur And Darranga Mil Stn Under Ge Rangia, Rangia-Assam

TDR : 55830875

Tender Notice
BOQ

12 Days Left

Rangia , Assam

Tender Brief : Tender For Repair Of Steel And Wooden Furniture At Rangia, Hattigor, Tamulpur And Darranga Mil Stn Under Ge Rangia

Document Fees
₹ 500 /-

EMD
₹ 80000.0 /-

Tender Value
₹ 40 Lakhs /-

Submission Date
25-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be french polished with high gloss finish shade as approved by Engineer In charge,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick pre-laminated particle board both side laminated, duly fixed with half round teak wood beading in matching shade with synthetic adhesive. All kind of work will be executed where the furniture exist in different user Units of GE Rangia including BSO's Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 17.04).
2	Bed Plywood top FD-246 :-S&F of new BWR 12 thick plywood as per drg. Make of plywood- Archidply/Century/Greenply.
3	Repair of head board as per drg.
4	Repair of Foot board as per drg.
5	S & F of rails as per drg.
6	S & F stiffner as per drg.
7	Polishing of bed plytop as per above note.
8	Table dining 6 person FD-273:- S & F of Top as per drg.
9	S & F of Legs as per drg
10	S & F of Rails as per drg
11	Polishing of Table dining as per above note.
12	Table writing FD-275:-S & F of Top as per drg.
13	S & F of Legs as per drg.
14	S&F of Rails as per drg
15	Repair of drawer & shutter as per drg.
16	S& F of lock as per existing pattern.
17	S & F of Stiffener as per drg.
18	Polishing of Table writing as per above note.
19	Table Peg FD-384:- S & F of Top as per drg.
20	S&F of Legs as per drg
21	S & F of Rails as per drg
22	S & F of stiffner as per drg
23	Polishing of Table Peg as per above note.
24	Teapoy FD-382:- S & F of Top as per drg.
25	S & F of Legs as per drg
26	S & F of Rails as per drg
27	S & F of stiffner as per drg
28	Polishing of Table Teapoy as per above note.
29	Chair easy :- FD-229:-S & F of Back rail including hole of canning as per drg.
30	S & F of Front leg as per drg.
31	S & F of Rear legs as per drg.
32	S & F of Rails including hole of canning as per drg.
33	S & F of handle as per drg.
34	Polishing of Chair easy as per above Note.
35	Removing the existing unserviceable cane plastic from the chair and Re-canning the chairs with plastic cane as per existing size.
36	Table dressing ladies with mirror FD-251:-S & F mirror of size 1220x366x5.5 mm fixed with the wooden frame as per drg.
37	S & F of aluminium channel with including 5.5 mm thick dual sliding glass set
38	Repair of drawer as per drg.
39	Repair of wooden leg frame as per drg.
40	Polishing of Table dressing ladies with mirror as per above note.
41	Almirah small/medium steel :FD-1032 / FD-243 :- S & F of lock as per existing pattern and shape. Make-Harrison/Godrej/Link
42	S & F of CP handle as per existing pattern.
43	Repair of steel portion with welding,grinding and applying putty to smooth the surface.
44	S & F of Leg as per existing pattern.
45	Painting of Almirah small/Medium steel as per Note.
46	Chair Revolving TP :- S& F of Arms of Chair as per exisitng pattern.
47	S& F of Pedestal of Chair as per exisitng pattern.
48	S& F of Hydraulic of chair as per exisitng pattern.
49	S& F of Chair seat as per existing pattern.
50	S& F of Chair back as per existing pattern.
51	S & F of frame of Chair as per existing pattern.
52	Trestle store room steel FD-1043 :- Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.
53	Painting of Trestle store room steel as per above Note.
54	Rack 6 tier steel FD-1038 :- Taking out existing broken shelf and fixing of new shlef as per existing pattern.
55	Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.
56	Painting of Rack 6 tier steel as per above Note.
57	Book Shelf open large steel :FD-69 (M) :- Repair of steel portion with welding,grinding and applying putty to smooth the surface as specified and directed by engineer in charge.
58	Painting of Book shelf open large steel as per Note.
59	Table office officer steel FD-1003 :-S & F of Top as per drg.
60	Repair of steel portion by removing denting, welding/ grinding and making surface smooth finish.
61	S & F of lock as per existing pattern.
62	Painting of table office officer steel as per above Note.
63	Chair CB steel with arms FD-75:-S&F of seat as per drg
64	S&F of back as per drg.
65	S&F of arms as per drg.
66	Repair of iron frame with denting, cutting, welding and grinding
67	Painting of steel portion in chair as per above Note.
68	Chair CB Steel without arms FD-75:-S&F of seat as per drg
69	S&F of back as per drg
70	Repair of iron frame with denting, cutting, welding and grinding.
71	Painting of steel portion in chairs as per above Note.
72	Locker steel 3 unit: FD-127M:-S&F of hasp & staples as per existing pattern.
73	Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.
74	S&F of CP handle as per existing pattern.
75	S & F of Leg as per existing pattern
76	Painting of Locker steel as per above Note.
77	Charpoy MS tubing with plytop:- FD/CWE/TEZ/04:-Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply.
78	Taking out existing broken head board from charpoy and fixing new head board with 18 mm thick prelaminated particle board both side laminated shade as approved by BSO/GE.
79	Repairs to Steel portion by welding/Grinding and applying putty to making surface smooth finish.
80	Painting of charpoy MS tubing with plytop as per above note Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Assam Tenders

Furniture Tenders

Furniture Items Tenders

Wooden Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair Of Steel And Wooden Furniture At Rangia, Hattigor, Tamulpur And Darranga Mil Stn Under Ge Rangia, Rangia-Assam

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be french polished with high gloss finish shade as approved by Engineer In charge,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick pre-laminated particle board both side laminated, duly fixed with half round teak wood beading in matching shade with synthetic adhesive. All kind of work will be executed where the furniture exist in different user Units of GE Rangia including BSO's Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 17.04).
2	Bed Plywood top FD-246 :-S&F of new BWR 12 thick plywood as per drg. Make of plywood- Archidply/Century/Greenply.
3	Repair of head board as per drg.
4	Repair of Foot board as per drg.
5	S & F of rails as per drg.
6	S & F stiffner as per drg.
7	Polishing of bed plytop as per above note.
8	Table dining 6 person FD-273:- S & F of Top as per drg.
9	S & F of Legs as per drg
10	S & F of Rails as per drg
11	Polishing of Table dining as per above note.
12	Table writing FD-275:-S & F of Top as per drg.
13	S & F of Legs as per drg.
14	S&F of Rails as per drg
15	Repair of drawer & shutter as per drg.
16	S& F of lock as per existing pattern.
17	S & F of Stiffener as per drg.
18	Polishing of Table writing as per above note.
19	Table Peg FD-384:- S & F of Top as per drg.
20	S&F of Legs as per drg
21	S & F of Rails as per drg
22	S & F of stiffner as per drg
23	Polishing of Table Peg as per above note.
24	Teapoy FD-382:- S & F of Top as per drg.
25	S & F of Legs as per drg
26	S & F of Rails as per drg
27	S & F of stiffner as per drg
28	Polishing of Table Teapoy as per above note.
29	Chair easy :- FD-229:-S & F of Back rail including hole of canning as per drg.
30	S & F of Front leg as per drg.
31	S & F of Rear legs as per drg.
32	S & F of Rails including hole of canning as per drg.
33	S & F of handle as per drg.
34	Polishing of Chair easy as per above Note.
35	Removing the existing unserviceable cane plastic from the chair and Re-canning the chairs with plastic cane as per existing size.
36	Table dressing ladies with mirror FD-251:-S & F mirror of size 1220x366x5.5 mm fixed with the wooden frame as per drg.
37	S & F of aluminium channel with including 5.5 mm thick dual sliding glass set
38	Repair of drawer as per drg.
39	Repair of wooden leg frame as per drg.
40	Polishing of Table dressing ladies with mirror as per above note.
41	Almirah small/medium steel :FD-1032 / FD-243 :- S & F of lock as per existing pattern and shape. Make-Harrison/Godrej/Link
42	S & F of CP handle as per existing pattern.
43	Repair of steel portion with welding,grinding and applying putty to smooth the surface.
44	S & F of Leg as per existing pattern.
45	Painting of Almirah small/Medium steel as per Note.
46	Chair Revolving TP :- S& F of Arms of Chair as per exisitng pattern.
47	S& F of Pedestal of Chair as per exisitng pattern.
48	S& F of Hydraulic of chair as per exisitng pattern.
49	S& F of Chair seat as per existing pattern.
50	S& F of Chair back as per existing pattern.
51	S & F of frame of Chair as per existing pattern.
52	Trestle store room steel FD-1043 :- Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.
53	Painting of Trestle store room steel as per above Note.
54	Rack 6 tier steel FD-1038 :- Taking out existing broken shelf and fixing of new shlef as per existing pattern.
55	Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.
56	Painting of Rack 6 tier steel as per above Note.
57	Book Shelf open large steel :FD-69 (M) :- Repair of steel portion with welding,grinding and applying putty to smooth the surface as specified and directed by engineer in charge.
58	Painting of Book shelf open large steel as per Note.
59	Table office officer steel FD-1003 :-S & F of Top as per drg.
60	Repair of steel portion by removing denting, welding/ grinding and making surface smooth finish.
61	S & F of lock as per existing pattern.
62	Painting of table office officer steel as per above Note.
63	Chair CB steel with arms FD-75:-S&F of seat as per drg
64	S&F of back as per drg.
65	S&F of arms as per drg.
66	Repair of iron frame with denting, cutting, welding and grinding
67	Painting of steel portion in chair as per above Note.
68	Chair CB Steel without arms FD-75:-S&F of seat as per drg
69	S&F of back as per drg
70	Repair of iron frame with denting, cutting, welding and grinding.
71	Painting of steel portion in chairs as per above Note.
72	Locker steel 3 unit: FD-127M:-S&F of hasp & staples as per existing pattern.
73	Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.
74	S&F of CP handle as per existing pattern.
75	S & F of Leg as per existing pattern
76	Painting of Locker steel as per above Note.
77	Charpoy MS tubing with plytop:- FD/CWE/TEZ/04:-Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply.
78	Taking out existing broken head board from charpoy and fixing new head board with 18 mm thick prelaminated particle board both side laminated shade as approved by BSO/GE.
79	Repairs to Steel portion by welding/Grinding and applying putty to making surface smooth finish.
80	Painting of charpoy MS tubing with plytop as per above note Please Enable Macros to View BoQ information

Tender For Repair Of Steel And Wooden Furniture At Rangia, Hattigor, Tamulpur And Darranga Mil Stn Under Ge Rangia, Rangia-Assam

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us